journal article·2026-02

Determining Load-Bearing Capacity for Metal–Polymer Plain Bearings under Dynamic Loading with the Use of Finite Element Simulation

K. Yu. Zerschikov, A. S. Elkin, I. V. Sergeichev

Journal of Friction and Wear· Volume 47· Issue 1
Publisher page

Abstract

Abstract By using the finite element method, the effect of loading exerted on the stress–strain state of reinforced metal-fluoroplastic plain bearings under static and dynamic loading conditions has been investigated. Metal-fluoroplastic bearings are considered as three-layer composites. Stresses and strains in the, antifriction and adhesive layers, as the main ones responsible for the bearing capacity under load, are studied. The difference in the stress-strain state under static and dynamic loading conditions of bearings is demonstrated. It has been established that the load capacity of bearings under dynamic loading depends on a ratio batween the effective stress– strain level and the strength characteristics of the adhesive layer material. The obtained results of calculations are compared with experimental data. The satisfactory correlation between the calculated and experimental data makes it possible to use this method for to determine the dynamic load capacity of plain bearings.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Polymer Science and Applications · Material Properties and Applications · Engineering and Materials Science Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Zershchikov, K.Y., Serviceability criteria of metal-polymer sliding bearings, Vestnik Armaturostroitelya, 2021, vol. 63, no. 1, pp. 20–23.
2. Voronkov, B.D., Podshipniki sukhogo treniya (Dry Friction Bearings), Leningrad: Mashinostroenie, 1979.
3. Martínez, F.J., Canales, M., Izquierdo, S., Jiménez, M.A., and Martínez, M.A., Finite element implementation and validation of wear modelling in sliding polymer–metal contacts, Wear, 2012, vols. 284–285, pp. 52–64. https://doi.org/10.1016/j.wear.2012.02.00310.1016/j.wear.2012.02.003 ↗
4. Chernets, M., Chernets, J., Kindrachuk, M., and Kornienko, A., Methodology of calculation of metal-polymer sliding bearings for contact strength, durability and wear, Tribology in Industry, 2020, vol. 42, no. 4, pp. 572–581. https://doi.org/10.24874/ti.900.06.20.1010.24874/ti.900.06.20.10 ↗
5. Dykha, A., Sorokatyi, R., Makovkin, O., and Babak, O., Calculation-experimental modeling of wear of cylindrical sliding bearings, East.-Eur. J. Enterp. Technol., 2017, vol. 5, no. 1, pp. 51–59. https://doi.org/10.15587/1729-4061.2017.10963810.15587/1729-4061.2017.109638 ↗
6. Dykha, A. and Marchenko, D., Prediction the wear of sliding bearings, International Journal of Engineering and Technology, 2018, vol. 7, no. 2.23, pp. 4–8. https://doi.org/10.14419/ijet.v7i2.23.1187210.14419/ijet.v7i2.23.11872 ↗
7. Miler, D., Škec, S., Katana, B., and Žeželj, D., An experimental study of composite plain bearings: The influence of clearance on friction coefficient and temperature, Strojniški Vestn. – J. Mech. Eng., 2019, vol. 65, no. 10, pp. 547–556. https://doi.org/10.5545/sv-jme.2019.610810.5545/sv-jme.2019.6108 ↗
8. Semenov, A.P. and Savinskii, Y.E., Metalloftoroplastovye podshipniki (Metal Fluoroplastic Bearings), Moscow: Mashinostroenie, 1976.
9. Bearings for valves and other applications in hydraulic, energy and metal industry, products. https://slibitaly.com/products/#tf. Cited December 23, 2025.
10. Technymon. Plain. Sliding. Bearings, product catalogue. https://technymon.com/download/. Cited December 23, 2025.
11. CSB/Products, E-Catalogue. https://www.csb.com.cn/ en/download/. Cited December 23, 2025.
12. Products from polymeric materials and composites based on them, Plain bearings. https://www.constanta-2.ru/podshipniki_skolgenia. Cited December 23, 2025.
13. Zershchikov, K.Yu. and Kuzakhmetova, E.K., Metal-polymer bearings for rotating units of shut-off valves, Truboprovodnaya Armatura i Oborudovanie, 2012, no. 2, pp. 22–23.
14. Zershchikov, K.Yu., Elkin, A.S., Semenov, Yu.V., and Mashkov, A.V., Calculation of bearing capacity of metal–polymer plain bearings, Armaturostroenie, 2023, vol. 144, no. 3, pp. 42–45.
15. Zershchikov, K.Yu., Yelkin, A.S., Sergeichev, I.V., Semenov, Yu.V., and Mashkov, A.V., Determination of the carrying ability of metal-fluoroplast slide bearings using the finite element method, J. Frict. Wear, 2023, vol. 44, no. 6, pp. 367–375. https://doi.org/10.3103/s106836662306011910.3103/s1068366623060119 ↗