Influence of Technological Parameters on the Gearing Service Life
Source abstract
Abstract
Abstract This article examines the gear transmission of a two-stage gearbox as a tribological system whose performance is determined by friction conditions and the contact fatigue endurance of the tooth surfaces. The geometric parameters of the transmission were calculated and contact and bending stresses were analyzed using the APM WinMachine software package. It was shown that when using steel 45 with heat treatment—hardening with high tempering, the acting contact stresses reach the maximum permissible values, which leads to intensive wear and a short transmission life. To improve durability, it is proposed to replace the gear pinion and wheel material with 20CrNi structural alloy steel with a chemical-thermal carburization treatment, which reduces the relative level of contact stresses and increases contact endurance. An analysis of the influence of loading cycle parameters on the contact and bending stresses determining the nature of tooth wear is conducted. It is shown that for cemented gears, the calculated fatigue stresses do not depend on the cycle parameters, which indicates increased stability of the tribological characteristics of the transmission.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Polymer Science and Applications · Mechanical Systems and Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Sokolova, V.P., Primenenie resursosberegayushchikh tekhnologii dlya uvelicheniya sroka sluzhby par treniya (Application of Resource Saving Technologies to Increase Service Life of Friction Couples), Rostov-on-Don: Rostovskii Gosudarstvennyi Universitet Putei Soobshcheniya, 2021.
2. Polonskii, V.L. and Tyurin, A.P., Design of stationary seals for underwater oil production equipment, Chem. Pet. Eng., 2017, vol. 53, nos. 3–4, pp. 273–278. https://doi.org/10.1007/s10556-017-0334-610.1007/s10556-017-0334-6 ↗
3. Polyushkin, N.G., Osnovy teorii treniya, iznosa i smazki. Uchebnoe posobie (Fundamentals of Theory of Friction, Wear, and Lubrication: A Textbook), Krasnoyarsk: Krasnoyarckii Gosudarstvennyi Agrarnyi Universitet, 2013.
4. Artobolevskii, I.I., Teoriya mekhanizmov i mashin. Uchebnik dlya vtuzov (Theory of Mechanisms and Machines: A Textbook for Technical Universities), Moscow: Nauka, 1988, 4th ed.
5. Saletti, G., Battiato, G., and Zucca, S., A coupled harmonic balance-based approach for the non-linear dynamics of spur-gear pairs, Vibration, 2025, vol. 8, no. 2, p. 18. https://doi.org/10.3390/vibration802001810.3390/vibration8020018 ↗
6. Gu, Yi., Li, L., and Zheng, G., Study on the dynamic characteristics of the gear lubrication flow field with baffles and optimization design strategies, Lubricants, 2025, vol. 13, no. 4, p. 143. https://doi.org/10.3390/lubricants1304014310.3390/lubricants13040143 ↗
7. Myshkin, N.K. and Petrokovets, M.I., Trenie, smazka, iznos. Fizicheskie osnovy i tekhnicheskie prilozheniya tribologii (Friction, Lubrication, Wear: Physical Basis and Technical Applications of Tribology), Moscow: Fizmatlit, 2007.
8. Braun, E.D., Bushe, N.A., Buyanovskii, I.Ya., et al., Osnovy tribologii (trenie, iznos, smazka): Uchebnik dlya vuzov (Fundamentals of Tribology (Friction, Wear, Lubrication): A Textbook for Universities), Chichinadze, A.V., Ed., Moscow: Nauka i Tekhnika, 2011.
9. Markin, Yu.S., Vosstanovlenie zubchatykh peredach sel’skokhozyaistvennoi tekhniki (Restoration of Agricultural Machinery Gears), Ryazan: Ryazanskaya Gosudarstvennaya Sel’skokhozyaistvennaya Akademiya, 2001.
10. Arzamasov, B.N., Makarova, V.I., Mukhin, G.G., et al., Materialovedenie. Uchebnik dlya vuzov (Materials Science: A Textbook for Universities), Arzamasov, B.N. and Mukhin, G.G., Eds., Moscow: Moskovskii Gosudarstvennyi Tekhnicheskii Universitet im. N.E. Baumana, 2003, 5th ed.
11. Markin, Yu.S., Pitelina, N.I., and Lezin, P.P., Wear and restoration of gears, Mekh. Elektrif. Sel’skogo Khoz., 2001, no. 2, pp. 24–26.
12. Balovnev, N.P., Raschet tsilindricheskikh zubchatykh peredach. Uchebno-metodicheskoe posobie (Calculation of Cylindrical Gears: A Training Manual), Moscow: Moskovskii Politekh, 2021.