journal article·2025-12

Tribotechnical Characteristics of HDPE-Based Polymer Composites under Friction with Snow

A. Ya. Grigoriev, D. M. Gutsev, V. G. Kudritsky, N. K. Myshkin, S. P. Bogdanovich, V. P. Selkin, I. N. Silchenko, O. S. Sterekhov

Journal of Friction and Wear· Volume 46· Issue 6
Publisher page

Abstract

Abstract Results of evaluating the tribotechnical characteristics of polymer composite materials based on low-density polyethylene PE273, modified with various fillers: polyethylene wax (5%), graphite with carbon black (15%), and ultra-high molecular weight polyethylene (5% UHMWPE), are presented. The aim of the work was to evaluate the friction coefficient during contact with snow and the wear resistance of the materials under conditions of dry friction at extreme load-speed parameters. The studies were conducted using a specialized tribometer, simulating ski operating conditions, and a 2070 SMT-1 friction machine. It was found that the introduction of 5% UHMWPE into the base polymer reduces the friction coefficient by a factor of 2–3 (to 0.02–0.08) in the temperature range from –10 to 0°C. Furthermore, this composition-maintained operability at friction over steel at a velocity of 0.5 m/s at contact pressures up to 1.0 MPa, while other composites studied failed at 0.75 MPa. The results of the work are of practical importance for the development of sliding surfaces for sports and transportation means operating under extreme conditions of temperature and load.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Orthopaedic implants and arthroplasty · Winter Sports Injuries and Performance

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Kablov, E.N., Composites: Today and tomorrow, Metally Evrazii, 2015, no. 1, pp. 36–39.
2. Pesetskii, S.S. and Myshkin, N.K., Multifunctional polymer composites: Prospects of research and applications in Belarus (a review), Polimernye Materialy i Tekhnologii, 2016, vol. 2, no. 4, pp. 6–29. https://doi.org/10.32864/polymmattech-2016-2-4-6-2910.32864/polymmattech-2016-2-4-6-29 ↗
3. Sviridenok, A.I., Myshkin, N.K., and Kovaleva, I.N., Latest developments in tribology in the journal Friction and Wear, J. Frict. Wear, 2015, vol. 36, no. 6, pp. 449–453. https://doi.org/10.3103/s106836661506015x10.3103/s106836661506015x ↗
4. Kietzig, A.-M., A biomimetic approach to ice friction, Green Tribology, Nosonovsky, M. and Bhushan, B., Eds., Green Energy and Technology, Berlin: Springer, 2012, pp. 223–264. https://doi.org/10.1007/978-3-642-23681-5_910.1007/978-3-642-23681-5_9 ↗
5. Gerasimov, N.P., Using of teflon sliding skis surface for cross-country skis sliding efficiency increase, Mezhdunarodnyi Nauchno-Issledovatel’skii Zhurnal, 2015, no. 7, pp. 10–12.
6. Cooper, J.W. and Mccrum, N.G., Anomalous internal friction in linear polyethylene at low temperatures, J. Mater. Sci., 1972, vol. 7, no. 10, pp. 1221–1224. https://doi.org/10.1007/bf0055020610.1007/bf00550206 ↗
7. Gogoleva, O.V., Popov, S.N., Petrova, P.N., and Okhlopkova, A.A., Structure and properties of composites based on ultrahigh-molecular polyethylene and thermally expanded graphite, Russ. Eng. Res., 2014, vol. 34, no. 12, pp. 743–746. https://doi.org/10.3103/s1068798x1412012010.3103/s1068798x14120120 ↗
8. Kanaga Karuppiah, K.S., Bruck, A.L., Sundararajan, S., Wang, J., Lin, Zh., Xu, Z.-H., and Li, X., Friction and wear behavior of ultra-high molecular weight polyethylene as a function of polymer crystallinity, Acta Biomater., 2008, vol. 4, no. 5, pp. 1401–1410. https://doi.org/10.1016/j.actbio.2008.02.02210.1016/j.actbio.2008.02.022 ↗
9. Aderikha, V.N. and Pesetskii, S.S., The sliding base of cross-country plastic skis: The specifics of friction conditions, the current state and prospects of research and development (review), Polimernye Materialy i Tekhnologii, 2019, vol. 5, no. 3, pp. 6–23. https://doi.org/10.32864/polymmattech-2019-5-3-6-2310.32864/polymmattech-2019-5-3-6-23 ↗
10. Pesetskii, S.S., Zhdanok, S.A., Krauklis, A.V., Bogdanovich, S.P., Buyakov, I.F., and Golubovich, V.V., Specific features of the structure and properties of polyetheleneterephthalate containing added carbon nanofillers and chain extension, Dokl. Nats. Akad. Nauk Belarusi, 2010, vol. 54, no. 6, pp. 105–110.