Investigation of the Dependence of Friction Coefficients of Antifriction Materials Based on Silver on Ambient Pressure in Vacuum
Source abstract
Abstract
Abstract— This paper presents a method for determining the friction coefficients of an antifriction coating based on silver with the addition of molybdenum disulfide or graphite in vacuum. The method for determining the coefficients of friction is implemented at a vacuum tribometer. The dependences of the friction coefficients in the contacting pair consisting of steel ShKh-15 and an antifriction coating based on silver with the addition of molybdenum disulfide and, in another case, graphite, were obtained depending on the ambient pressure. The values of the average friction coefficient in a pair of a ball made of ShKh-15 steel and a ring with an antifriction coating containing 94% silver and 6% molybdenum disulfide were obtained to be 0.114 with a standard deviation of 0.012 and 0.168 with a standard deviation of 0.01 at an atmospheric pressure of 1000 and 0.03 mbar, respectively. For the antifriction material based on silver with the addition of 6% graphite, the friction coefficient varies from 0.144 to 0.26 as the pressure changes from 1000 up to 0.03 mbar. Analytical dependences of the friction coefficient for both antifriction materials on the height of ascent in the atmosphere have been obtained, which will make it possible to develop the procedure for calculating spherical articulated bearings for high-altitude aircraft.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Tribology and Wear Analysis · Mechanical Systems and Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Drozdov, Yu.N., Yudin, E.G., and Belov, A.I., Prikladnaya tribologiya (trenie, iznos, smazka) (Applied Tribology (Friction, Wear, Lubrication)), Drozdov, Yu.N., Ed., Moscow: Eko-Press, 2010.
2. Belyachenkov, I.O., Shchegoleva, N.E., Chainikova, A.S., Vaganova, M.L., and Shavnev, A.A., Silicon nitride ceramic materials for aviation GTE bearings and methods of manufacturing (review), Trudy VIAM, 2019, no. 7, p. 5. https://doi.org/10.18577/2307-6046-2019-0-7-4210.18577/2307-6046-2019-0-7-42 ↗
3. Chernets, M.V., Kornienko, A.A., Pashechko, M.I., Chernets, Yu.M., and Dukhota, A.I., Regarding the question of calculation of contact pressure in metal-polymer plain bearings during wear, J. Frict. Wear, 2021, vol. 42, no. 5, pp. 359–366. https://doi.org/10.3103/s106836662105004410.3103/s1068366621050044 ↗
4. Falaleev, S.V., Balyakin, V.B., Yurtaev, A.A., and Dolgikh, D.E., Increasing the reliability of RHA system of the aircraft GTE compressor through the use of bushings with molybdenum coating, Nasosy. Turbiny. Sistemy, 2022, no. 4, pp. 30–37.
5. Babak, V.P., Shchepetov, V.V., and Kharchenko, S.D., Antifriction nanostructural glass-composite self-lubricating coatings, J. Frict. Wear, 2022, vol. 43, no. 3, pp. 215–220. https://doi.org/10.3103/s106836662203002310.3103/s1068366622030023 ↗
6. Balyakin, V.B., Filippov, A.A., and Dolgikh, D.E., Increasing the durability of articulated spherical bearings through the use of a silver-based antifriction coating, Izv. Samar. Nauch. Tsentra Ross. Akad. Nauk, 2024, vol. 26, no. 4-3, pp. 465–471. https://doi.org/10.37313/1990-5378-2024-26-4(3)-465-47110.37313/1990-5378-2024-26-4(3)-465-471 ↗
7. Kovaleva, M.G., Kolpakov, A.J., Poplavsky, A.I., Galkina, M.E., Gerus, J.V., Lyubushkin, R.A., and Mishunin, M.V., Properties of coatings based on carbon and nitrogen-doped carbon obtained using a pulsed vacuum arc method, J. Frict. Wear, 2018, vol. 39, no. 4, pp. 345–348. https://doi.org/10.3103/s106836661804007410.3103/s1068366618040074 ↗
8. Panin, S.V., Buslovich, D.G., Luo, T., Kornienko, L.A., and Alexenko, V.O., Tribological characteristics of three-component solid-lubricant composites based on polyetherimide under conditions of point and linear tribocontacts, Fundamental’nye Problemy Sovremennogo Materialovedeniya, 2022, vol. 19, no. 3, pp. 402–410. https://doi.org/10.25712/ASTU.1811-1416.2022.03.01310.25712/ASTU.1811-1416.2022.03.013 ↗
9. Balyakin, V.B., Filippov, A.A., and Dolgikh, D.E., Tribotechnical characteristics of anti-friction material based on silver with added molybdenum disulphide, J. Frict. Wear, 2024, vol. 45, no. 5, pp. 308–311. https://doi.org/10.3103/s106836662470045410.3103/s1068366624700454 ↗
10. Balyakin, V.B., Filippov, A.A., and Dolgikh, D.E., Improvement of tribotechnical characteristics of the surface of the antifriction material based on silver due to modification with graphite in order to increase the durability of articulated bearings, Izv. Samar. Nauch. Tsentra Ross. Akad. Nauk, 2024, vol. 26, no. 4, pp. 26–34. https://doi.org/10.37313/1990-5378-2024-26-4-26-3410.37313/1990-5378-2024-26-4-26-34 ↗
11. Spherical Plain Bearings Plain Bushes Rod Ends. Catalog 238, Herzogenaurach, Germany: INA-Schaeffler KG.