journal article·2025-12

Tribotechnical Characteristics of Lubricants from the Series of Perfluorinated Polytriazines

N. V. Lebedev, R. A. Chebotar, T. E. Sukhanova, Yu. G. Trishin, A. Dzh. Breki

Journal of Friction and Wear· Volume 46· Issue 6
Publisher page

Abstract

Abstract Despite high thermal-oxidative stability and chemical inertness, standard perfluoropolyether lubricants are susceptible to catalytic decomposition at high temperatures in the presence of metals, leading to corrosion and limiting their use. A solution to this problem may be the use of perfluoroalkyl-substituted triazines, which exhibit significantly higher corrosion-oxidative stability. The aim of this study was to evaluate the feasibility of using synthesized perfluoroalkyl-substituted polytriazines (PFPT) with molecular weights ranging from 932 to 2920 as lubricants and compare their tribological properties with those of the commercial perfluoropolyether (PFPE). A number of PFPT samples (bis-triazines and oligotriazine) were studied by DSC and TGA methods and boiling points were determined. Tribological tests were carried out using the plane-to-plane design (ShKh15 steel/12Kh1 steel) at room temperature. The average friction coefficient (fav) was determined for each PFPT sample, with fav consistently increasing with increasing PFPT molecular weight. It was shown that the friction coefficient of PFPT (0.12–0.18) is comparable to that of PFPE (0.13) and significantly lower than that of dry friction (0.27). The results confirm the potential of PFPT as chemically inert and thermally stable lubricants. Their tribotechnical characteristics are comparable to those of commercial PFPE, indicating the possibility of combined use or replacement.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Corti, C. and Savelli, P., Perfluoropolyether lubricants, Journal of Synthetic Lubrication, 1993, vol. 9, no. 4, pp. 311–330. https://doi.org/10.1002/jsl.300009040510.1002/jsl.3000090405 ↗
2. Carré, D.J., The performance of perfluoropolyalkylether oils under boundary lubrication conditions, Tribol. Trans., 1988, vol. 31, no. 4, pp. 437–441. https://doi.org/10.1080/1040200880898184510.1080/10402008808981845 ↗
3. Carré, D.J., Perfluoropolyalkylether lubricants under boundary conditions: Iron catalysis of lubricant degradation, J. Synth. Lubr., 1989, vol. 6, no. 1, pp. 1–15. https://doi.org/10.1002/jsl.300006010210.1002/jsl.3000060102 ↗
4. Paciorek, K.J.L. and Kratzer, R.H., Stability of perfluoroalkylethers, J. Fluorine Chem., 1994, vol. 67, no. 2, pp. 169–175. https://doi.org/10.1016/0022-1139(93)02943-910.1016/0022-1139(93)02943-9 ↗
5. Khimiya ftororganicheskikh soedinenii (Chemistry of Organofluorine Compounds), Knunyants, I.L., Ed., Moscow: Khimiya, 1973.
6. Jones, W.R. and Snyder, C.E., Boundary lubrication, thermal and oxidative stability of a fluorinated polyether and a perfluoropolyether triazine, ASLE Trans., 1980, vol. 23, no. 3, pp. 253–261. https://doi.org/10.1080/0569819800898296710.1080/05698198008982967 ↗
7. Riichi, I., Haruyoshi, T., Sokolov, S.V., and Kollar, A.N., Perfluoroalkyleneethertriazine oligomer and process for producing the same, US Patent 5789532, 1998.
8. Vakis, A.I. and Polycarpou, A.A., Head-disk interface nanotribology for Tbit/inch2 recording densities: Near-contact and contact recording, J. Phys. D: Appl. Phys., 2010, vol. 43, no. 22, p. 225301. https://doi.org/10.1088/0022-3727/43/22/22530110.1088/0022-3727/43/22/225301 ↗
9. Waltman, R., Wiita, C., Deng, H., Suthar, T., and Joseph, J., PFPE lubricant molecular weight effects on slider-disk interactions, Tribol. Online, 2014, vol. 9, no. 4, pp. 184–192. https://doi.org/10.2474/trol.9.18410.2474/trol.9.184 ↗
10. Chebotar’, R.A., Lebedev, N.V., and Trishin, Yu.G., Prepartion of perfluorinated bistriazines based on perfluorodiimidoilamidines, Materialy V Vserossiiskoi nauchno-prakticheskoi konferentsii, posvyashchennoi 190-letiyu D.I. Mendeleeva Sovremennye tendentsii razvitiya khimicheskoi tekhnologii, promyshlennoi ekologii i ekologicheskoi bezopasnosti (Proceedings of the 5th All-Russian Scientific and Practical Conference Dedicated to the 190th Anniversary of D.I. Mendeleev Modern Trends in the Development of Chemical Technology, Industrial Ecology and Environmental Safety), St. Petersburg, 2024, St. Petersburg: Sankt-Peterburgskii Gosudarstvennyi Universitet Promyshlennykh Tekhnologii I Dizaina, 2024, pp. 142–144.
11. Ponomarenko, V.A., Krukovskii, S.P., and Alybina, A.Yu., Ftorsoderzhashchie geterotsepnye polimery (Fluorinated Heterochain Polymers), Moscow: Nauka, 1973.
12. Fomblin® PFPE Lubricants. Product Data Sheet. Solvay Specialty Polymers, Version 2.2, 2017.
13. Breki, A.D., Tribotechnical characteristics of materials of friction pairs and lubricating media under conditions of spontaneous changes of friction contact states, Doctoral (Eng.) Dissertation, 2021.
14. Breki, A. and Nosonovsky, M., Friction and adhesion of Johansson gauge blocks, Surf. Innovations, 2024, vol. 12, nos. 1–2, pp. 18–22. https://doi.org/10.1680/jsuin.22.0108310.1680/jsuin.22.01083 ↗
15. Breki, D., Alexandrov, S.E., Biel, A.S., Chulkin, S.G., Yakhimovich, V.A., Gvozdev, E.E., Kolmakov, A.G., and Protopopov, E.A., Generalized mathematical model of the dynamics of the change in the friction force at rest and the beginning of sliding, Chebyshevskii Sbornik, 2022, vol. 23, no. 2, pp. 179–190. https://doi.org/10.22405/2226-8383-2022-23-2-179-19010.22405/2226-8383-2022-23-2-179-190 ↗