Application of Cluster Analysis of Acoustic Emission Signals to Measure Wear in Sliding Friction Units
Source abstract
Abstract
Abstract A new approach to measuring wear in sliding friction units based on the use of cluster analysis of acoustic emission signals accompanying the operation of the triboassembly is proposed and experimentally investigated. A special feature of the proposed approach is that the contribution of each mechanism of damage to the friction unit, which is identified in a multidimensional field of acoustic emission features with a time reference for their manifestation, is considered in the total wear, which makes it possible to trace the dynamics of wear of the friction unit directly during observation (measurement). The study was conducted by comparing the use of two promising threshold-free clustering algorithms for acoustic data relative to the standard amplitude threshold method for detecting and identifying acoustic emission events, which allowed us to gain an idea of the advantages of the proposed approach in comparison with the current level of development of this type of technology. The results have shown that the use of multiparametric cluster analysis to detect the type of damage (wear) mechanism allows for at least 45% increase in the probability of detection of friction surfaces setting compared to the amplitude threshold method, while maintaining the probability of scuffing detection at the same level. It has been found that the proposed approach makes it possible to estimate wear without stopping the friction unit operation with an average discrepancy in the wear assessment between the proposed and alternative methods for measuring wear at an average level of 16% throughout the measurements. The results obtained allow us to consider the proposed approach as a promising on-line method for acoustic emission diagnostics and monitoring of the technical condition of sliding friction units.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Machine Fault Diagnosis Techniques · Brake Systems and Friction Analysis · Industrial Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. Ponomarev, Y.N., Eremenko, V.P., and Filatov, S.V., Friction pair diagnostic method, SU Inventor’s Certificate 1113710, 1984.
2. Sviridenok, A.I., Kalmykova, T.F., Kholodilov, O.V., and Smurugov, V.A., Solid body wear resistance investigation method, SU Inventor’s Certificate 979958, 1982.
3. Poduraev, V.N., Barzov, A.A., and Gorlov, V.A., Tekhnologicheskaya diagnostika rezaniya metodom akusticheskoi emissii (Technological Diagnostics of Cutting by Acoustic Emission Method), Moscow: Mashinostroenie, 1988.
4. Belyi, V.A., Kholodilov, O.V., and Sviridyonok, A.I., Acoustic spectrometry as used for the evaluation of tribological systems, Wear, 1981, vol. 69, no. 3, pp. 309–319. https://doi.org/10.1016/0043-1648(81)90321-510.1016/0043-1648(81)90321-5 ↗
5. Filatov, S.V., Acoustic emission during abrasive wear of metals, Trenie Iznos, 1982, vol. 3, no. 3, pp. 559–562.
6. Fadin, Yu.A., Kozyrev, Yu.P., and Bulatov, V.P., Evaluation of mass loss in abrasive wear by acoustic emission data, J. Frict. Wear, 1999, vol. 20, no. 2, pp. 74–77.
7. Belas, O.M., An approach to evaluation of wear of friction couples by the method of acoustic emission, Mater. Sci. (N. Y., NY, U. S.), 2001, vol. 37, no. 1, pp. 103–105. https://doi.org/10.1023/a:101239450796310.1023/a:1012394507963 ↗
8. Baranov, V., Kudryavtsev, E., Sarychev, G., and Schavelin, V., Acoustic Emission in Friction, Tribology and Interface Engineering Series, Elsevier, 2007.
9. Kozyrev, Ju.P. and Sedakova, E.B., Method of monitoring wear of friction pair, RF Patent 2263891, 2005.
10. Matsuoka, K., Forrest, D., and Ming-Kai, T., On-line wear monitoring using acoustic emission, Wear, 1993, vols. 162–164, pp. 605–610. https://doi.org/10.1016/0043-1648(93)90549-210.1016/0043-1648(93)90549-2 ↗
11. Bershadskij, L.I., Potemkin, M.M., Vojtov, V.A., Mankina, I.V., Lyashko, V.A., and Zhigalov, I.A., Method of diagnosis of friction pair, SU Inventor’s Certificate 1594379, 1990.
12. Fadin, Yu.A., Application of acoustic emissions for mass wear analysis, J. Frict. Wear, 2008, vol. 29, no. 1, pp. 21–23. https://doi.org/10.3103/s106836660801004210.3103/s1068366608010042 ↗
13. Nosovskij, I.G., Teslya, V.F., Vojtov, V.A., Nosovskij, O.I., and Belas, O.N., Method of checking friction conditions of metal surfaces of friction unit, SU Inventor’s Certificate 1597694, 1990.
14. Rastegaev, I., Merson, D., Rastegaeva, I., and Vinogradov, A., A time-frequency based approach for acoustic emission assessment of sliding wear, Lubricants, 2020, vol. 8, no. 5, p. 52. https://doi.org/10.3390/lubricants805005210.3390/lubricants8050052 ↗
15. Rastegaev, I.A., Merson, D.L., Danyuk, A.V., Afanasyev, M.A., and Vinogradov, A., Using acoustic emission signal categorization for reconstruction of wear development timeline in tribosystems: Case studies and application examples, Wear, 2018, vols. 410–411, pp. 83–92. https://doi.org/10.1016/j.wear.2018.06.00610.1016/j.wear.2018.06.006 ↗
16. Rastegaev, I.A., Merson, D.L., Vinogradov, A.Yu., and Danyuk, A.V., Technique for the determination of the critical points under acoustic emission tribological tests, Inorg. Mater., 2017, vol. 53, no. 15, pp. 1506–1512. https://doi.org/10.1134/s002016851715014610.1134/s0020168517150146 ↗