journal article·2025-10

Strategies for Improving the Tribotechnical Properties of TiN/a-C Coatings

O. A. Belyak, V. I. Kolesnikov, D. V. Maksimov, E. D. Anikina, M. M. Chetverik

Journal of Friction and Wear· Volume 46· Issue 5
Publisher page

Abstract

Abstract In the present work, the mechanical properties and tribological characteristics of TiN (monolayer) and TiN/a‑C (bilayer; two variants of combinations of elastoplastic properties of the layers) coatings were investigated using experimental and theoretical approaches. The microstructure of the synthesized coatings and the topography of the surface were characterized by scanning electron microscopy. Characterization of the a‑C coating was carried out by the diffuse total internal reflection (DTIR) method using a Fourier‑transform infrared (FT‑IR) spectrometer. Hardness and reduced modulus were obtained by continuous (instrumented) indentation with a Berkovich indenter. Wear rate and coefficient of friction were determined in sliding friction tests. The results of the comprehensive experimental study of the coatings served as the basis for developing a finite‑element model of indentation of a bilayer elastoplastic medium with various combinations of elastic and plastic properties and different relative layer thicknesses. A correlation between coating parameters H/E and H3/E2 and the wear rate was established experimentally. Functional dependences of hardness and reduced modulus on the relative thickness of the surface metastable a‑C layer were determined theoretically. The optimal ratio of the thicknesses of the constituent layers in the TiN/a‑C coating for given elastoplastic material properties, yielding the best tribological performance, was identified.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Coatings · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Aghaei, A.A., Eshaghi, A., and Karami, E., Silicon solar cell performance deposited by diamond like carbon thin film “atomic oxygen effects”, Acta Astronaut., 2017, vol. 138, pp. 369–373. https://doi.org/10.1016/j.actaastro.2017.06.01610.1016/j.actaastro.2017.06.016 ↗
2. Pavlenko, V.I., Cherkashina, N.I., and Zaitsev, S.V., Fabrication and characterization of nanocomposite films Al, Cu/Al and Cr/Al formed on polyimide substrate, Acta Astronaut., 2019, vol. 160, pp. 489–498. https://doi.org/10.1016/j.actaastro.2019.02.02510.1016/j.actaastro.2019.02.025 ↗
3. Santos, M.D., Fukumasu, N.K., Tschiptschin, A.P., Lima, N.B., Figueroa, C.A., Weber, J.S., Souza, R.M., and Machado, I.F., Effect of Ti/Si and Ti/TiN/Si interlayers on the structure, properties, and tribological behavior of an a-C film deposited onto a C17200 copper-beryllium alloy, Surf. Coat. Technol., 2022, vol. 441, p. 128561. https://doi.org/10.1016/j.surfcoat.2022.12856110.1016/j.surfcoat.2022.128561 ↗
4. Liu, L., Wu, Zh., An, X., Xiao, Sh., Cui, S., Lin, H., Fu, R.K.Y., Tian, X., Wei, R., Chu, P.K., and Pan, F., Excellent adhered thick diamond-like carbon coatings by optimizing hetero-interfaces with sequential highly energetic Cr and C ion treatment, J. Alloys Compd., 2018, vol. 735, pp. 155–162. https://doi.org/10.1016/j.jallcom.2017.11.05710.1016/j.jallcom.2017.11.057 ↗
5. Song, Z., Liu, Yi., Liu, Yu., Jiang, X., Pilipstou, D.G., and Rogachev, A.V., Improving the protective properties of an artificial joint friction couple by using TiN and DLC films, Surf. Coat. Technol., 2023, vol. 472, p. 129944. https://doi.org/10.1016/j.surfcoat.2023.12994410.1016/j.surfcoat.2023.129944 ↗
6. Chen, X., Du, Ya., and Chung, Y.-W., Commentary on using H/E and H/E as proxies for fracture toughness of hard coatings, Thin Solid Films, 2019, vol. 688, p. 137265. https://doi.org/10.1016/j.tsf.2019.04.04010.1016/j.tsf.2019.04.040 ↗
7. Łępicka, M., Grądzka-Dahlke, M., Pieniak, D., Pasierbiewicz, K., Kryńska, K., and Niewczas, A., Tribological performance of titanium nitride coatings: A comparative study on TiN-coated stainless steel and titanium alloy, Wear, 2019, vols. 422–423, pp. 68–80. https://doi.org/10.1016/j.wear.2019.01.02910.1016/j.wear.2019.01.029 ↗
8. Belyak, O.A., Suvorova, T.V., and Manturov, D.S., Study of tribological and mechanical characteristics of wear-resistant coatings taking into account their elastoplastic properties, J. Frict. Wear, 2024, vol. 45, no. 5, pp. 280–286. https://doi.org/10.3103/s106836662470042910.3103/s1068366624700429 ↗
9. Kolesnikov, V.I., Kudryakov, O.V., Voropaev, A.I., Kolesnikov, I.V., Varavka, V.N., Lifar, M.S., Guda, A.A., Manturov, D.S., and Novikov, E.S., Formation and prediction of the properties of ion-plasma diamond-like coatings under nitrogen stabilization, J. Frict. Wear, 2024, vol. 45, no. 1, pp. 9–17. https://doi.org/10.3103/s106836662470002810.3103/s1068366624700028 ↗
10. Pashkov, D.M., Belyak, O.A., Guda, A.A., and Kolesnikov, V.I., Reverse engineering of mechanical and tribological properties of coatings: Results of machine learning algorithms, Phys. Mesomech., 2022, vol. 25, no. 4, pp. 296–305. https://doi.org/10.1134/s102995992204003810.1134/s1029959922040038 ↗
11. McMaster, S.J., Kosarieh, Sh., Liskiewicz, T.W., Neville, A., and Beake, B.D., Utilising H/E to predict fretting wear performance of DLC coating systems, Tribol. Int., 2023, vol. 185, p. 108524. https://doi.org/10.1016/j.triboint.2023.10852410.1016/j.triboint.2023.108524 ↗
12. Robertson, J., Diamond-like amorphous carbon, Mater. Sci. Eng., R, 2002, vol. 37, nos. 4–6, pp. 129–281. https://doi.org/10.1016/s0927-796x(02)00005-010.1016/s0927-796x(02)00005-0 ↗
13. Konshina, E.A. and Vangonen, A.I., Features of the vibrational spectra of diamond-like and polymer-like a‑C:H films, Semiconductors, 2005, vol. 39, no. 5, pp. 585–590. https://doi.org/10.1134/1.192356910.1134/1.1923569 ↗
14. Vatul’yan, A.O. and Belyak, O.A., An asymptotic approach to the calculation of wave fields in a layer with a defect with a small characteristic size, Acoust. Phys., 2020, vol. 66, no. 3, pp. 213–219. https://doi.org/10.1134/s106377102002012810.1134/s1063771020020128 ↗
15. Belyak, O.A. and Suvorova, T.V., Influence of the foundation microstructure on frictional forces during the motion of a flat punch, Ekologicheskii Vestnik Nauchnykh Tsentrov Chernomorskogo Ekonomicheskogo Sotrudnichestva, 2018, vol. 15, no. 3, pp. 25–31. https://doi.org/10.31429/vestnik-15-3-25-3110.31429/vestnik-15-3-25-31 ↗