Effect of Pentaerythritol Tetraether-Based Lubricants on the Structure and Properties of Bronze in the CuAl5–Steel C45 Friction Pair
Source abstract
Abstract
Abstract Methods of X-ray diffraction, X-ray phase analysis, and optical metallographic microscopy were used to study the mechanisms of influence of lubricating compositions based on a dispersion medium, tetraether pentaerythritol C5–C9 (TEPE C5–C9), with soap dispersed phases on the structure and physicomechanical characteristics of the surface layers of CuAl5 bronze after its friction in a pair with C45 steel. Concentrated surface-active substances (surfactants) were used as dispersed phases (thickeners): lithium soap of 12-hydroxystearic acid (12-LioSt), calcium soap of 12-hydroxystearic acid (12-CaoSt), as well as complex calcium soap, including a composition of salts of 12-hydroxystearic and acetic acids (k-Ca). It has been shown that after friction of bronze, an alternative change in the yield strength of the surface layer of the samples (Rehbinder and Roscoe effects) occurs in all lubricating compositions, depending on the composition. The appearance of internal residual mesostresses in this layer as a result of tribodeformation triggers an ascending diffusion mechanism, causing a concentration redistribution of the components in the material, up to the complete removal of the alloying element atoms from its near-surface layer (selective transfer mode). It is shown that changes in the mechanical properties of the material and its wear resistance depend on the colloidal-chemical parameters of the surface and oxidative activity of the lubricant composition, determined by the hydrophilic-lipophilic balance of the molecules of its components. Thus, the introduction of 12-LioSt additive into the base medium of TEPE C5–C9 reduces the wear rate of bronze by 1.3 times, the addition of k-Ca additive, by 6.5 times, and the introduction of 12-CaoSt additive increases this rate by 10%.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Polymer Science and Applications · Lubricants and Their Additives · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Czichos, H., Tribology: A Systems Approach to the Science and Technology of Friction, Lubrication, and Wear, Amsterdam: Elsevier, 1978.
2. Tribologiya. Sostoyanie i perspektivy. Sbornik nauchnykh trudov v 4 t. (Tribology: State and Prospects: A Collection of Scientific Works in 4 Volumes), vol. 2: Smazka i smazochnye materialy (Lubrication and Lubricants), Goryacheva, I.G., Bronovets, M.A., Zakharov, S.M., and Buyanovskii, I.A., Eds., Ufa: Ufimskii Gosudarstvennyi Aviatsionnyi Tekhnicheskii Universitet, 2019.
3. Adetunla, A., Afolalu, S., Jen, T.-C., and Ogundana, A., The roles of surfactant in tribology applications of recent technology: An overview, E3S Web Conf., 2023, vol. 391, p. 01012. https://doi.org/10.1051/e3sconf/20233910101210.1051/e3sconf/202339101012 ↗
4. Gu, H. and Hirayama, T., Effect of surfactant self-assembly on lubrication performance in oil-based systems: The role of reverse micelles and vesicles, Front. Mech. Eng., 2025, vol. 11, p. 1608716. https://doi.org/10.3389/fmech.2025.160871610.3389/fmech.2025.1608716 ↗
5. Kuksenova, L.I. and Savenko, V.I., Effect of surface-active media on contact elastoplastic deformations of surface layers of metals and their tribological characteristics, Russ. J. Phys. Chem. A, 2024, vol. 98, no. 7, pp. 1411–1424. https://doi.org/10.1134/s003602442470041910.1134/s0036024424700419 ↗
6. Barabash, V.M., Abiev, R.Sh., and Kulov, N.N., Theory and practice of mixing: A review, Theor. Found. Chem. Eng., 2018, vol. 52, no. 4, pp. 473–487. https://doi.org/10.1134/s004057951804036x10.1134/s004057951804036x ↗
7. Fuks, G.I., Dobavki k plastichnym smazkam (Additives for Plastic Lubricants), Moscow: Khimiya, 1982.
8. Kruglyakov, P.M., Hydrophile-Lipophile Balance of Surfactants and Solid Particles: Physicochemical Aspects and Applications, Elsevier, 2000.
9. Lange, K.R., Poverkhnostno-aktivnye veshchestva (Surfactants), St. Petersburg: Professiya, 2004.
10. Petukhov, V.Yu. and Gumarov, G.G., Issledovanie poverkhnostnykh sloev tverdykh tel metodom skol’zyashchego rentgenovskogo puchka (Investigation of Solid Surface Layers by Sliding X-Ray Beam Method), Kazan: Kazanskii Gosudarstvennyi Universitet, 2009.
11. Rybakova, L.M. and Kuksenova, L.I., Struktura i iznosostoikost’ metalla (Metal Structure and Wear Resistance), Moscow: Mashinostroenie, 1982.
12. Malygin, G.A., Mechanism of strain hardening and dislocation-structure formation in metals subjected to severe plastic deformation, Phys. Solid State, 2006, vol. 48, no. 4, pp. 693–699. https://doi.org/10.1134/s106378340604012310.1134/s1063783406040123 ↗
13. Suvorov, E.V., Difraktsionnyi strukturnyi analiz (Diffraction Structural Analysis), Moscow: Yurait, 2023.
14. Diagrammy sostoyaniya dvoinykh metallicheskikh sistem. Spravochnik v 3 tomakh (Phase Diagrams of Binary Metallic Systems: A Handbook in Three Volumes), Lyakishev, N.P., Ed., Moscow: Mashinostroenie, 1996, vol. 1.
15. Savenko, V.I. and Shchukin, E.D., New applications of the Rebinder effect in tribology, J. Frict. Wear, 1992, vol. 13, pp. 115–115.
16. Ping, Ya., Uphill diffusion, The ECPH Encyclopedia of Mining and Metallurgy, Kuangdi, X., Ed., Singapore: Springer, 2024, pp. 2253–2255. https://doi.org/10.1007/978-981-99-2086-0_41110.1007/978-981-99-2086-0_411 ↗
17. Pines, B.Ya., Ocherki po metallofizike (Essays on Metallophysics), Kharkov: Khar’kovskii Gosudarstvennyi Universitet, 1961.
18. Kragelskii, I.V., Dobychin, M.N., and Kombalov, V.S., Friction and Wear Calculation Methods, Oxford: Pergamon, 1982.
19. Rusanov, A.I. and Shchekin, A.K., Mitselloobrazovanie v rastvorakh poverkhnostno-aktivnykh veshchestv (Micelle Formation in Solutions of Surfactants), St. Petersburg: Lan’, 1922.
20. Rusanov, A.I., On the thermodynamics of solubilization, Colloid J., 2021, vol. 83, no. 1, pp. 127–134. https://doi.org/10.1134/S1061933X2006011310.1134/S1061933X20060113 ↗
21. Buckley, D.H., Surface Effects in Adhesion, Friction, Wear and Lubrication, New York: Elsevier, 1981.
22. Tushinskii, L.I. and Poteryaev, Yu.P., Problemy materialovedeniya v tribologii (Problems of Materials Science in Tribology), Novosibirsk: Novosibirskii Eletrotekhnicheskii Institut, 1991.