Estimating the Load Capacity of a Worm Gear Based on the Analysis of Frictional Oscillations of a High-Speed Shaft
Source abstract
Abstract
Abstract This article demonstrates the relationship between a decrease in energy efficiency and the load-carrying capacity of worm gears with an increase in the amplitude of torque oscillations as the coupling load increases. An analysis is conducted of the causes of the increase in the amplitude of torque oscillations with increasing gear load. It is shown that the disruption of the self-oscillation mode occurring in a worm gear should occur due to an increase in the friction coefficient, which depends on the lubrication conditions, in particular, on the thickness of the lubricant film. The study demonstrates that in the case of lubrication of the gear with standard mineral oil with a nano-modified additive, the loss of stability of self-oscillations occurs at significantly higher loads (290 N m) than in the case of lubrication with standard mineral oil without the additive (230 N m), indicating greater resistance of this option to disturbing effects and can be explained by the greater thickness of the lubricant film. The study obtained graphs of the dependence of the worm gear efficiency on the braking torque for various lubricant options. It is shown that the increase in efficiency when using standard mineral oil with a nanomodified additive (a nanodispersed suspension of serpentine in a solution of fatty acid salts) compared to standard mineral oil is associated with improved antifriction properties of the coupling and a reduction in the amplitude of torque oscillations. The study demonstrates that the stability of a worm gear under load can be experimentally assessed by measuring the amplitude of torque oscillations on the high-speed shaft of the gear. To expand the range of permissible loads, it is necessary to improve the antifriction properties of the lubricant by using a nanomodified additive. This leads to a reduction in the amplitude of self-oscillations of the worm shaft, a reduction in friction path, and a reduction in power losses.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Gear and Bearing Dynamics Analysis · Polymer Science and Applications · Mechanical Systems and Engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Kiselev, B.R., Zamyatina, N.I., and Godlevskii, V.A., Evaluation of worm gearscouple score-resistance by means of tribo-active additives application, Trenie Smazka Mash. Mekh., 2013, no. 10, pp. 15–19.
2. Biryukov, V.P., Goryunov, N.A., and Prints, A.N., Effect of additives to base oils to improve tribotechnical characteristics in friction pairs, Journal of Advanced Research in Technical Science, 2022, no. 30, pp. 38–41. https://doi.org/10.26160/2474-5901-2022-30-38-4110.26160/2474-5901-2022-30-38-41 ↗
3. Albagachiev, A.Yu. and Tokhmetova, A.B., Tribotechnical properties of nanomodifier 2, J. Mach. Manuf. Reliab., 2020, vol. 49, no. 10, pp. 870–873. https://doi.org/10.3103/s105261882010002710.3103/s1052618820100027 ↗
4. Moshkovich, A., Lapsker, I., Feldman, Y., and Rapoport, L., Severe plastic deformation of four FCC metals during friction under lubricated conditions, Wear, 2017, vols. 386–387, pp. 49–57. https://doi.org/10.1016/j.wear.2017.05.01810.1016/j.wear.2017.05.018 ↗
5. Moshkovich, A., Perfilyev, V., and Rapoport, L., Effect of plastic deformation and damage development during friction of fcc metals in the conditions of boundary lubrication, Lubricants, 2019, vol. 7, no. 5, p. 45. https://doi.org/10.3390/lubricants705004510.3390/lubricants7050045 ↗
6. Mai, Y.J., Chen, F.X., Zhou, M.P., Xiao, Q.N., Cai, G.F., and Jie, X.H., Anchored graphene nanosheet films towards high performance solid lubricants, Mater. Des., 2018, vol. 160, pp. 861–869. https://doi.org/10.1016/j.matdes.2018.10.03010.1016/j.matdes.2018.10.030 ↗
7. Fontanari, V., Benedetti, M., Girardi, Ch., and Giordanino, L., Investigation of the lubricated wear behavior of ductile cast iron and quenched and tempered alloy steel for possible use in worm gearing, Wear, 2016, vols. 350–351, pp. 68–73. https://doi.org/10.1016/j.wear.2016.01.00610.1016/j.wear.2016.01.006 ↗
8. Polyakov, S.A., Goncharov, S.Yu., Zakharov, M.N., and Lychagin, V.V., Improving worm-gear performance by optimal lubricant selection in accelerated tests, Russ. Eng. Res., 2015, vol. 35, no. 4, pp. 253–255. https://doi.org/10.3103/s1068798x1504020610.3103/s1068798x15040206 ↗
9. Berestnev, O.V., Goman, A.M., and Ishin, N.N., Analiticheskie metody mekhaniki v dinamike privodov (Analytical Methods of Mechanics in Drive Dynamics), Minsk: Nauka i Tekhnika, 1992.
10. Polyakov, S.A., Goncharov, S.Y., Lychagin, V.V., Klimov, A.Yu., and Kuts, M.S., Analysis of the contact interaction in worm gears in connection with the development of a model of their nonlinear oscillations, Sborka v Mashinostroenii, Priborostroenii, 2017, no. 11, pp. 510–518.
11. Andronov, A.A., Vitt, A.A., and Khaikin, S.E., Teoriya kolebanii (Theory of Oscillations), Moscow: Nauka, 1981, 2nd ed.
12. Polyakov, S.A., Kuksenova, L.I., and Kuleshova, E.M., The kinetics of load-bearing capacity formation of sliding pairings in the use of nanomodified lubricants, J. Frict. Wear, 2019, vol. 40, no. 6, pp. 541–545. https://doi.org/10.3103/s106836661906020510.3103/s1068366619060205 ↗
13. Polyakov, S.A., Goncharov, S.Yu., and Kuksenova, L.I., Development of method for evaluating performance of worm gears via analysis of their tribological characteristics, J. Mach. Manuf. Reliab., 2016, vol. 45, no. 5, pp. 458–463. https://doi.org/10.3103/s105261881602011410.3103/s1052618816020114 ↗