journal article·2025-10

Tribotechnical Coatings for Space Application

M. A. Bronovets

Journal of Friction and Wear· Volume 46· Issue 5
Publisher page

Abstract

Abstract The need to use solid lubricating coatings (SLCs) arose with the launch of the first space satellites, in which cold welding of articulated joints took place. SLCs have the following main advantages [1, 2, 4]: low evaporation in a vacuum, low friction coefficient, and performance in zero gravity. They can be used in outer space conditions over a wider temperature range than frost-resistant plastic lubricants. The selection of the most suitable SLC [3–6] requires a thorough study of their tribotechnical characteristics depending on the design of friction units, frictional interaction parameters, and environmental characteristics. SLCs are capable of operating in a wide range of temperatures in air, vacuum, and gas environments; they have a radiation resistance of 106–1010 rad depending on the binder; they are capable of withstanding high contact loads and are insensitive to zero gravity. The most widespread SLCs are in the form of suspensions of solid lubricant with a binder, applied by a spray gun with subsequent curing by heat treatment. A wide range of coatings has been developed: VNIINP-213, VNIINP-512, VNIINP-513, APF-5, EONIT-3, and Dimolits. We conducted tribological testing of the above coatings using various friction pair configurations, in air and vacuum, at various temperatures, and across a wide range of loads and sliding speeds. These data are important for selecting coatings for friction components being developed for spacecraft.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Silicone and Siloxane Chemistry · Tribology and Wear Analysis · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (8)

Show source-provided references
1. Bronovets, M.A., Tribological coatings for open space, J. Frict. Wear, 2023, vol. 44, no. 6, pp. 362–366. https://doi.org/10.3103/s106836662306002810.3103/s1068366623060028 ↗
2. Yang, J.C. and de Groh, K.K., Materials issues in the space environment, MRS Bull., 2010, vol. 35, no. 1, pp. 12–20. https://doi.org/10.1017/S088376940010000410.1017/S0883769400100004 ↗
3. Bronovets, M.A., Open space: Tribology problems and test tasks, Sbornik statei mezhdunarodnoi nauchnoi konferentsii Mekhanika i tribologiya transportnykh sistem (MekhTriboTrans−2021) (Proceedings of the International Scientific Conference Mechanics and Tribology of Transport Systems (MechTriboTrans-2021)), Rostov-on-Don: Rostovskii Gosudarstvennyi Universitet Putei Soobshcheniya, 2021, pp. 35–40. https://doi.org/10.46973/978-5-907295-520_2021_3510.46973/978-5-907295-520_2021_35 ↗
4. Wang, H., Xu, B., and Liu, J., Solid lubrication materials, Micro and Nano Sulfide Solid Lubrication, Berlin: Springer, 2012, pp. 1–60. https://doi.org/10.1007/978-3-642-23102-5_110.1007/978-3-642-23102-5_1 ↗
5. Vazirisereshk, M.R., Martini, A., Strubbe, D.A., and Baykara, M.Z., Solid lubrication with MoS2: A review, Lubricants, 2019, vol. 7, no. 7, p. 57. https://doi.org/10.3390/lubricants707005710.3390/lubricants7070057 ↗
6. Sun, X., Solid lubricants for space mechanisms, Encyclopedia of Tribology, Wang, Q.J. and Chung, Y.W., Eds., Boston: Springer, 2013, pp. 3165–3172. https://doi.org/10.1007/978-0-387-92897-5_123010.1007/978-0-387-92897-5_1230 ↗
7. Lince, J.R., Doped MoS2 coatings and their tribology, Encyclopedia of Tribology, Wang, Q.J. and Chung, Y.W., Eds., Boston: Springer, 2013, pp. 782–785. https://doi.org/10.1007/978-0-387-92897-5_117510.1007/978-0-387-92897-5_1175 ↗
8. Georgakilas, V., Perman, J.A., Tucek, J., and Zbořil, R., Broad family of carbon nanoallotropes: Classification, chemistry, and applications of fullerenes, carbon dots, nanotubes, graphene, nanodiamonds, and combined superstructures, Chem. Rev., 2015, vol. 115, no. 11, pp. 4744–4822. https://doi.org/10.1021/cr500304f10.1021/cr500304f ↗