journal article·2025-08

Tribological Characteristics of MAO-Coatings Modified with Al–Cu–Fe Quasicrystals

E. V. Torskaya, A. V. Morozov, V. N. Malyshev, O. O. Shcherbakova, T. I. Muravyeva

Journal of Friction and Wear· Volume 46· Issue 4
Publisher page

Abstract

Abstract Modification of ceramic coatings developed for friction units is an important area of research aimed at improving their tribological characteristics. This paper presents ceramic coatings formed on B95 and D16 aluminum alloys by the microarc oxidation (MAO) method in a single-stage technological process with inclusions of Al–Cu–Fe quasicrystals. The technology of rubbing quasicrystals into the coating surface during final polishing was also used. Friction and wear tests were carried out according to the ASTM G99 standard paired with a tungsten carbide ball. Analysis of the surface and cross sections by the SEM microscopy method showed that the modification affects the coating structure. Quasicrystals are concentrated in the pores and participate in the friction process. Addition of a small amount of modifier to the electrolyte, as well as the rubbing technology, make it possible to reduce the friction coefficient and wear rate compared to purely ceramic coatings obtained on the B95 alloy. A larger amount of modifier gives a negative result. Adding a modifier to the electrolyte when forming coatings on D16 alloy leads to an increase in the friction coefficient and a decrease in wear resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Quasicrystal Structures and Properties · Metallurgical and Alloy Processes · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Malyshev, V.N. and Zorin, K.M., Formation of ceramic coatings by microarc oxidation method in slurry electrolytes, Uprochnyayushchie Tekhnol. Pokrytiya, 2006, no. 11, pp. 34–39.
2. Letyagin, N.V., Akopyan, T.K., Sokorev, A.A., Tsydenov, A.G., Musin, A.F., and Palkin, P.A., Structure and properties of coatings formed on cast Al–Ca alloys by plasma electrolytic oxidation, Metallurgist, 2024, vol. 67, nos. 9–10, pp. 1473–1481. https://doi.org/10.1007/s11015-024-01640-610.1007/s11015-024-01640-6 ↗
3. Zlotnikov, I.I. and Shapovalov, V.M., Improving the antifriction properties of ceramic coatings obtained by the method of MAO on aluminum alloys, J. Frict. Wear, 2019, vol. 40, no. 5, pp. 360–363. https://doi.org/10.3103/s106836661905022210.3103/s1068366619050222 ↗
4. Lu, X., Mohedano, M., Blawert, C., Matykina, E., Arrabal, R., Kainer, K.U., and Zheludkevich, M.L., Plasma electrolytic oxidation coatings with particle additions—A review, Surf. Coat. Technol., 2016, vol. 307, pp. 1165–1182. https://doi.org/10.1016/j.surfcoat.2016.08.05510.1016/j.surfcoat.2016.08.055 ↗
5. Krishtal, M.M., Ivashin, P.V., Rastegaev, I.A., Polunin, A.V., and Borgardt, E.D., The influence of nano-sized silicon dioxide addition in electrolyte on tribological characteristics of oxide layers formed with microarc oxidation on aluminum–silicon alloy, Vektor Nauki Tol’yattinskogo Gosudarstvennogo Universiteta, 2014, no. 1, pp. 48–52.
6. Pakhomov, M.A., Stolyarov, V.V., Mezrin, A.M., and Torskaya, E.V., Effect of graphene and temperature on friction coefficient of nanocomposite Al2O3/graphene, J. Phys.: Conf. Ser., 1967, vol. 1967, no. 1, p. 012028. https://doi.org/10.1088/1742-6596/1967/1/01202810.1088/1742-6596/1967/1/012028 ↗
7. Qi, X., Li, J., He, Ya., Liu, Yu., Liu, R., and Song, R., Study on the wear resistance and corrosion behaviour of self-sealed MAO/ZrO2 coatings prepared on 7075 aluminium alloy, J. Alloys Compd., 2023, vol. 969, p. 172436. https://doi.org/10.1016/j.jallcom.2023.17243610.1016/j.jallcom.2023.172436 ↗
8. Cai, H., Zhang, Ch., Li, H., and Jiang, B., Self-lubricating nanocomposite coatings using MAO to improve tribological properties of 6061 aluminum alloy, Mater. Res. Express, 2021, vol. 8, no. 3, p. 036401. https://doi.org/10.1088/2053-1591/abe8e610.1088/2053-1591/abe8e6 ↗
9. Sunilraj, S., Blessto, B., Sivaprasad, K., and Muthupandi, V., Microstructural and corrosion behavior of MAO coated 5052 aluminum alloy, Mater. Today Proc., 2021, vol. 41, pp. 1120–1124. https://doi.org/10.1016/j.matpr.2020.08.75510.1016/j.matpr.2020.08.755 ↗
10. Lu, X., Mohedano, M., Blawert, C., Matykina, E., Arrabal, R., Kainer, K.U., and Zheludkevich, M.L., Plasma electrolytic oxidation coatings with particle additions–A review, Surf. Coat. Technol., 2016, vol. 307, pp. 1165–1182. https://doi.org/10.1016/j.surfcoat.2016.08.05510.1016/j.surfcoat.2016.08.055 ↗
11. Torskaya, E., Shkalei, I., Morozov, A., Stepanov, F., Malyshev, V., and Svistkov, A., Structure, friction and wear of AlZn5.5MgCu based PEO coatings modified by diamond nanoparticles and silver micropowder, Tribol. Int., 2025, vol. 203, p. 110417. https://doi.org/10.1016/j.triboint.2024.11041710.1016/j.triboint.2024.110417 ↗
12. Yadav, T.P. and Mukhopadhyay, N.K., Quasicrystal: A low-frictional novel material, Curr. Opin. Chem. Eng., 2018, vol. 19, pp. 163–169. https://doi.org/10.1016/j.coche.2018.03.00510.1016/j.coche.2018.03.005 ↗
13. Sordelet, D.J., Widener, S.D., Tang, Y., and Besser, M.F., Characterization of a commercially produced Al–Cu–Fe–Cr quasicrystalline coating, Mater. Sci. Eng., 2000, no. 15, pp. 834–837. https://doi.org/10.1016/S0921-5093(00)01056-X10.1016/S0921-5093(00)01056-X ↗
14. Huttunen-Saarivirta, E., Microstructure, fabrication and properties of quasicrystalline Al–Cu–Fe alloys: A review, J. Alloys Compd., 2004, vol. 363, nos. 1–2, pp. 154–178. https://doi.org/10.1016/s0925-8388(03)00445-610.1016/s0925-8388(03)00445-6 ↗
15. Fleury, E., Kim, Y.-C., Kim, J.-S., Kim, D.-H., Kim, W.T., Ahn, H.-S., and Lee, S.-M., Comparative study of the tribological behavior of thermal sprayed quasicrystalline coating layers, J. Alloys Compd., 2002, vol. 342, nos. 1–2, pp. 321–325. https://doi.org/10.1016/s0925-8388(02)00246-310.1016/s0925-8388(02)00246-3 ↗