Study on Microscopic Characteristics and Wear Testing of Steel Surface after Ultrasonic Impact Treatment
Source abstract
Abstract
Ultrasonic impact treatment is a surface strengthening technique that utilizes ultrasonic vibrations to enhance the topography, stress, hardness, and other surface characteristics of materials, thereby improving their resistance to wear, corrosion, and similar performance attributes. This paper focuses on the application of ultrasonic impact treatment on 1045 steel, which underwent this process subsequent to quenching. Experimental analysis of the surface hardness and roughness of untreated, quenched, and ultrasonic impact-treated 1045 steel specimens demonstrates that the quenching process results in a 37.4% increase in surface hardness and a 32.9% reduction in surface roughness. In comparison, the ultrasonic impact treatment leads to a more substantial improvement, with a 47.2% increase in surface hardness and a 56.4% decrease in surface roughness. To evaluate the friction and wear characteristics of the different specimens, a series of ball–disk tests were conducted under both dry friction and oil lubrication conditions. The results indicate that the surface subjected to ultrasonic impact treatment exhibited the lowest coefficient of friction, minimal surface wear, and a relatively moderate surface wear development rate under dry friction conditions. Specifically, the quenching process reduced the surface wear rate by 10.8%, while the ultrasonic impact treatment led to a substantial reduction of 52.60%. Under oil lubrication conditions, ultrasonic impact treatment decreased the surface wear rate by 18.26%. Additionally, this research delves into the microscopic wear mechanisms and observed wear behaviors of the 1045 steel specimens under different lubrication conditions. It particularly examines how lubricating oils may adversely affect the tribological performance of ultrasonically treated steel surfaces. By providing a comparative analysis of the specimens subjected to ultrasonic impact treatment and those processed through traditional quenching, this paper aims to enhance the understanding of the effects of ultrasonic impact treatment on the performance of metal materials and to offer a reference framework for optimizing the tribological applications of such materials.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Residual Stress · Erosion and Abrasive Machining · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Wang, Ch., Li, R., Bi, X., Yuan, W., Gu, J., Chen, J., Yan, M., and Zhang, Z., Microstructure and wear resistance property of laser cladded CrCoNi coatings assisted by ultrasonic impact treatment, J. Mater. Res. Technol., 2023, vol. 22, no. 22, pp. 853–864. https://doi.org/10.1016/j.jmrt.2022.11.17010.1016/j.jmrt.2022.11.170 ↗
2. Yuan, Yu., Li, R., Bi, X., Yan, M., Cheng, J., and Gu, J., Review on numerical simulation of ultrasonic impact treatment (UIT): Present situation and prospect, J. Mater. Res. Technol., 2024, vol. 30, pp. 1319–1340. https://doi.org/10.1016/j.jmrt.2024.03.10710.1016/j.jmrt.2024.03.107 ↗
3. Zhang, Q., Li, M., Han, B., Zhang, Sh., Li, Yu., and Hu, Ch., Investigation on microstructures and properties of Al1.5CoCrFeMnNi high entropy alloy coating before and after ultrasonic impact treatment, J. Alloys Compd., 2021, vol. 884, p. 160989. https://doi.org/10.1016/j.jallcom.2021.16098910.1016/j.jallcom.2021.160989 ↗
4. Wang, X. and Wang, D., Microstructure and mechanical properties of welded joint of X80 pipeline steel before and after ultrasonic impact treatment, J. Mater. Eng. Perform., 2022, vol. 31, no. 2, pp. 1465–1477. https://doi.org/10.1007/s11665-020-05321-810.1007/s11665-020-05321-8 ↗
5. Jia, M., Wang, Yu., Yue, J., Cao, Ch., Li, K., Yu, Yu., Li, Yu., and Lu, Zh., Recent progress in laser shock peening: Mechanism, laser systems and development prospects, Surf. Interfaces, 2024, vol. 44, p. 103757. https://doi.org/10.1016/j.surfin.2023.10375710.1016/j.surfin.2023.103757 ↗
6. Joshi, M.D., Kumar, V., Litoria, A.K., Singh, D., and Hosmani, S.S., Effect of surface mechanical attrition treatment on tribological behavior of AISI 2205 steel, Mater. Today Proc., 2020, vol. 33, pp. 4919–4926. https://doi.org/10.1016/j.matpr.2020.02.48710.1016/j.matpr.2020.02.487 ↗
7. K, H., Kumar, S., Panneerselvam, T., Babu, P.D., and Sriraman, N., Investigating the effect of laser shock peening on the wear behaviour of selective laser melted 316L stainless steel, Opt. Laser Technol., 2023, vol. 162, p. 109317. https://doi.org/10.1016/j.optlastec.2023.10931710.1016/j.optlastec.2023.109317 ↗
8. Jiang, R., Zhang, Sh., Qin, X., Wang, R., Zhang, Zh., Zhang, Ya., Zhang, W., and Wang, Zh., Effects of electro-pulsing combining laser shock peening on the microstructure and corrosion resistance of Ti–6Al–4V alloy, Int. J. Adv. Manuf. Technol., 2024, vol. 134, nos. 5–6, pp. 2607–2622. https://doi.org/10.1007/s00170-024-14288-y10.1007/s00170-024-14288-y ↗
9. Wu, Zh., Cai, B., Bai, Yu., Quan, Sh., Li, X., Li, C., Huma, T., Gong, Yu., Sun, L., Pan, H., Tan, Zh., and Zhu, X., Regulating strength and ductility of gradient-structured Cu–Al–Zn via SMAT and annealing, J. Mater. Res. Technol., 2025, vol. 34, no. 34, pp. 703–715. https://doi.org/10.1016/j.jmrt.2024.12.11510.1016/j.jmrt.2024.12.115 ↗
10. Kazemi, A., Heidari, A., Amini, K., Aghadavoudi, F., and Mousavi, M.L., The effect of surface mechanical attrition treatment time on microstructure and mechanical properties of AZ31 Mg alloy, Prot. Met. Phys. Chem. Surf., 2023, vol. 59, no. 3, pp. 453–460. https://doi.org/10.1134/s207020512370050810.1134/s2070205123700508 ↗
11. Kan, W.H., Portella, Q., Chemkhi, M., Proust, G., Garbrecht, M., Cairney, J.M., and Retraint, D., Enhancing mechanical properties of laser powder bed fused 316L stainless steel through heat and surface mechanical attrition treatments, Mater. Sci. Eng., A, 910, vol. 910, p. 146862. https://doi.org/10.1016/j.msea.2024.14686210.1016/j.msea.2024.146862 ↗
12. Seok, T.-H., Park, S.-H., Kim, J.-H., and Huh, N.-S., New displacement-based finite element analysis method for predicting the surface residual stress generated by ultrasonic nanocrystal surface modification, Eur. J. Mech., A: Solids, 2023, vol. 100, p. 105008. https://doi.org/10.1016/j.euromechsol.2023.10500810.1016/j.euromechsol.2023.105008 ↗
13. Ghasemi, A. and Vanini, S.A.S., Experimental and numerical investigation of martensite phase transformation in austenitic stainless steel subjected to ultrasonic nanocrystal surface modification at room and cryogenic temperatures, Surf. Coat. Technol., 2023, vol. 474, p. 130109. https://doi.org/10.1016/j.surfcoat.2023.13010910.1016/j.surfcoat.2023.130109 ↗
14. Li, Ch., Amanov, A., Li, Yi., Wang, C., Wang, D., and Abdel Wahab, M., Prediction of residual stress distribution induced by ultrasonic nanocrystalline surface modification using machine learning, Adv. Eng. Software, 2024, vol. 188, p. 103570. https://doi.org/10.1016/j.advengsoft.2023.10357010.1016/j.advengsoft.2023.103570 ↗
15. Zhang, H., Shen, K., Lan, J., Xu, Sh., Chen, H., Fu, A., Lin, J., Cao, H., and Zheng, G., Surface nanocrystallization and biomedical performance of Ti–Ta laminated composite processed by surface mechanical grinding treatment, Appl. Surf. Sci., 2023, vol. 623, p. 157051. https://doi.org/10.1016/j.apsusc.2023.15705110.1016/j.apsusc.2023.157051 ↗
16. Xu, Sh., Shen, K., Han, M., Zhang, H., Lan, J., Lin, J., Cao, H., and Zheng, G., Surface nano-crystallisation and mechanical properties of Ti–Ta composite materials after surface mechanical grinding treatment, Mater. Charact., 2023, vol. 206, no. 6, p. 113458. https://doi.org/10.1016/j.matchar.2023.11345810.1016/j.matchar.2023.113458 ↗
17. Yang, Ch., Ye, Yu., Zhang, W., and Wang, X., Stress corrosion cracking behavior of AISI 316L stainless steel treated by surface mechanical grinding, Eng. Fract. Mech., 2023, vol. 292, p. 109613. https://doi.org/10.1016/j.engfracmech.2023.10961310.1016/j.engfracmech.2023.109613 ↗
18. Li, Yi., Shang, X., Chen, J., Zheng, G., Sang, H., Luo, Yo., Yu, L., Zhai, M., and Zhao, S., Ultrasonic horn material dependence of shot dynamics and target property induced by ultrasonic shot peening, J. Manuf. Processes, 2024, vol. 114, pp. 108–121. https://doi.org/10.1016/j.jmapro.2024.01.08610.1016/j.jmapro.2024.01.086 ↗
19. Qian, W., Wang, Yi., Liu, K., Yin, X., He, X., and Xie, L., Experimental study on the effect of shot peening and re-shot peening on the residual stress distribution and fatigue life of 20CrMnTi, Coatings, 2023, vol. 13, no. 7, p. 1210. https://doi.org/10.3390/coatings1307121010.3390/coatings13071210 ↗
20. Jung, Yo.H., Kim, B.J., Kim, H., Kim, S.H., Shin, S.-Y., Lee, S.G., Baek, M., Lee, D.J., Choi, I.-C., and Kim, J.G., Shot-peening time effect on the mechanical properties of AISI 4340 steel, Met. Mater. Int., 2024, vol. 31, no. 3, pp. 692–700. https://doi.org/10.1007/s12540-024-01774-x10.1007/s12540-024-01774-x ↗
21. Ma, Zh., Chen, T., Wang, Z., Xing, X., Hou, X., and Chang, Ch., Analysis of residual stress of gear tooth root after shot peening process, Int. J. Adv. Manuf. Technol., 2023, vol. 125, nos. 5–6, pp. 2147–2160. https://doi.org/10.1007/s00170-023-10875-710.1007/s00170-023-10875-7 ↗
22. Xue, H., Liu, Sh., Zhang, D., Xue, J., Zhang, W., Zheng, Zh., and Li, T., Effect of ultrasonic impact treatment with different impact energy and head shape on surface properties of U75V heavy rail, J. Mater. Eng. Perform., 2023, vol. 33, no. 18, pp. 9457–9466. https://doi.org/10.1007/s11665-023-08606-w10.1007/s11665-023-08606-w ↗
23. Huang, Sh., Qi, Zh., Zhang, A., Zhang, X., Li, Q., and Li, D., Reducing the anisotropy of the mechanical properties of directed energy deposited Ti6Al4V alloy with inter-layer ultrasonic impact peening and heat treatment, Mater. Sci. Eng., A, 2022, vol. 857, p. 144123. https://doi.org/10.1016/j.msea.2022.14412310.1016/j.msea.2022.144123 ↗
24. Li, G., Qu, Sh., Xie, M., Ren, Zh., and Li, X., Effect of multi-pass ultrasonic surface rolling on the mechanical and fatigue properties of HIP Ti–6Al–4V alloy, Materials, 2017, vol. 10, no. 2, p. 133. https://doi.org/10.3390/ma1002013310.3390/ma10020133 ↗
25. Zhao, W., Liu, D., Qin, H., Zhang, X., Zhang, H., Zhang, R., Ren, Zh., Ma, Ch., Amanov, A., Pyun, Y.-S., Doll, G.L., Dong, Ya., and Ye, Ch., The effect of ultrasonic nanocrystal surface modification on low temperature nitriding of ultra-high strength steel, Surf. Coat. Technol., 2019, vol. 375, no. 736, pp. 205–214. https://doi.org/10.1016/j.surfcoat.2019.07.00610.1016/j.surfcoat.2019.07.006 ↗
26. Ye, H., Sun, X., Liu, Yo., Rao, X.-X., and Gu, Q., Effect of ultrasonic surface rolling process on mechanical properties and corrosion resistance of AZ31B Mg alloy, Surf. Coat. Technol., 2019, vol. 372, pp. 288–298. https://doi.org/10.1016/j.surfcoat.2019.05.03510.1016/j.surfcoat.2019.05.035 ↗
27. Li, M., Guo, L., Li, J., Qi, Zh., Han, B., and Song, L., Effect of ultrasonic impact treatment on the microstructure and properties of laser cladded CoCrFeNiMox high entropy alloy coatings, Surf. Coat. Technol., 2024, vol. 476, p. 130243. https://doi.org/10.1016/j.surfcoat.2023.13024310.1016/j.surfcoat.2023.130243 ↗
28. Yao, Ch., Zhou, Zh., Zhao, Yu., Tan, L., Cui, M., and Wang, Ya., Experimental study on surface integrity changes during turning-ultrasonic impact of nickel alloy 718, Int. J. Adv. Manuf. Technol., 2021, vol. 112, nos. 5–6, pp. 1359–1371. https://doi.org/10.1007/s00170-020-06503-310.1007/s00170-020-06503-3 ↗