journal article·2025-08

Development and Implementation of a New Import-Substituting Tempering Oil for Steel Heat Treatment

D. G. Tyulenev, V. V. Maistrenko, A. N. Abramov, T. I. Gilmanov

Journal of Friction and Wear· Volume 46· Issue 4
Publisher page

Abstract

Abstract The paper discusses the development and application of domestic hardening oil during the heat treatment of elastic terminals for rail fasteners. The paper presents the results of laboratory comparative tests of the developed oil and its imported counterpart. The study of the effect of the cooling properties of hardening oils on the hardness and structure was conducted during the heat treatment of samples made of 38Si7 steel, which is used for the production of elastic terminals. The cooling properties of hardening oils were evaluated using the UZS-2 device for determining the cooling characteristics of technological and hardening media. It has been shown that the developed prototype of the quenching oil provides a maximum cooling rate of 94.2°C/s, a maximum cooling rate temperature of 615.8°C, a cooling time of 7.03 s to 600°C, a cooling time of 10.3 s to 400°C, a cooling time of 39.3 s to 200°C, and a cooling rate of 7.84°C/s at 300°C. At the same time, the hardness of the 38Si7 steel blanks after hardening is 53.2–54.6 HRC. As a result of the industrial tests, it was found that the developed hardening oil meets the requirements of the technological process of heat treatment of elastic terminals for rail fasteners made of 38SI7 steel and allows one to reduce the cost of purchasing an imported analog.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Railway Systems and Materials Science · Polymer Science and Applications · Industrial Engineering and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Novikov, I.I., Teoriya termicheskoi obrabotki metallov (Theory of Heat Treatment of Metals), Moscow: Lenand, 2024, 5th ed.
2. Mezin, I.Yu., Gun, G.S., Chukin, M.V., and Kramzina, L.V., Improving the quality of forming processes bar stock steel production for 40S2 spring products, Kachestvo v Obrabotke Materialov, 2015, no. 1, pp. 35–44.
3. Somnath, K., Keshari, K.K., Kumar, S., Chatterjee, A., Ghosh, S.S., Bhakat, A.K., and Sarkar, B., Development of Si–Mn alloyed spring steels suitable for elastic rail clip (ERC) application, International Journal of Metallurgical Engineering, 2015, vol. 4, no. 1, pp. 1–5. https://doi.org/10.5923/j.ijmee.20150401.0110.5923/j.ijmee.20150401.01 ↗
4. Krivoshchapov, V.V., Vershigora, S.M., Mezin, I.Yu., and Chukin, V.V., Development and improvement of spring terminals production technology, Proizvod. Prokata, 2000, no. 7, pp. 21–24.
5. Mezin, I.Yu., Gun, I.G., Limarev, A.S., and Mikhailovskiy, I.A., Some aspects of launching the production of spring clips for rail fastenings, CIS Iron Steel Rev., 2016, no. 12, pp. 26–31. https://doi.org/10.17580/cisisr.2016.02.0610.17580/cisisr.2016.02.06 ↗
6. Noskov, F.M., Kveglis, L.I., and Noskov, M.V., Tekhnologiya i oborudovanie termicheskoi i khimiko-termicheskoi obrabotki. Teoriya i tekhnologiya termicheskoi obrabotki metallov i splavov. Uchebnoe posobie (Technology and Equipment of Thermal and Chemical-Thermal Treatment: Theory and Technology of Thermal Treatment of Metals and Alloys: A Textbook), Krasnoyarsk: Sibirskii Federal’nyi Universitet, 2018.
7. MacKenzie, D.S., Selection of oil quenchants for heat treating processes, International Heat Treatment and Surface Engineering, 2013, vol. 8, no. 1, pp. 8–14. https://doi.org/10.1179/1749514813z.0000000008910.1179/1749514813z.00000000089 ↗
8. Sholom, V.Yu., Abramov, A.N., Kazakov, A.M., Sholom, A.V., and Ivanov, V.V., Cooling parameters determination unit for process media, Kuznechno-Shtampovochnoe Proizvodstvo. Obrabotka Metallov Davleniem, 2014, no. 5, pp. 30–33.
9. Sholom, A.V., Sholom, V.Yu., Polyakov, A.B., Tyulenev, D.G., Ivanov, V.V., Volkova, E.B., Korshunov, A.A., Kalimullin, A.A., Kornilova, O.P., Fazliakhmetov, F.N., Kramer, O.L., Trofimov, A.S., and Kuzvesova, A.A., Apparatus for determining cooling capacity of process medium, RF Patent 2699698, 2019.
10. ISO 9950:1995(E): Industrial Quenching Oils Determination of Cooling Characteristics—Nickel-Alloy Probe Test Method, Geneva: International Organization for Standardization, 1995.
11. Tyulenev, D.G., Sholom, V.Yu., Abramov, A.N., and Puzyrkov, D.F., The influence of cooling properties of quenching liquids and heat treatment modes on 40C2 steel hardness, Transportnoe Mashinostroenie, 2024, vol. 2024, no. 1, pp. 4–12. https://doi.org/10.30987/2782-5957-2024-1-4-1210.30987/2782-5957-2024-1-4-12 ↗
12. Prabhu, K.N. and Fernandes, P., Effect of surface roughness on metal/quenchant interfacial heat transfer and evolution of microstructure, Mater. Des., 2007, vol. 28, no. 2, pp. 544–550. https://doi.org/10.1016/j.matdes.2005.08.00510.1016/j.matdes.2005.08.005 ↗
13. Fernandes, P. and Prabhu, K.N., Comparative study of heat transfer and wetting behaviour of conventional and bioquenchants for industrial heat treatment, Int. J. Heat Mass Transfer, 2008, vol. 51, nos. 3–4, pp. 526–538. https://doi.org/10.1016/j.ijheatmasstransfer.2007.05.01810.1016/j.ijheatmasstransfer.2007.05.018 ↗