journal article·2025-08

Wear Resistance of 40Kh and 40KhN Structural Steels with a Nitrided Layer after Modifying Processing

N. K. Krioni, A. A. Mingazheva, A. Dzh. Mingazhev

Journal of Friction and Wear· Volume 46· Issue 4
Publisher page

Abstract

Abstract The article presents results of studies on the wear resistance of structural steels used to manufacture shafts for rotary positive‑displacement pumps. A characteristic feature of these pumps is the extremely small clearances between their working elements, on the order of about 10–25 µm, which depend on the amount of wear of the shafts at the bearing interfaces. Glow‑discharge nitriding (plasma nitriding) is the most efficient method for providing high wear resistance of parts. It is shown that one of the adverse phenomena during wear of the nitrided layer is the formation of abrasive particles as a result of spalling; these particles promote surface scoring of the bushing and, consequently, accelerate the wear process. The aim of the work was to investigate the wear resistance of steel that was glow‑discharge nitrided following preliminary processing by surface plastic deformation, medium‑energy ion implantation, magnetic‑pulse processing, and combined activation methods. The following surface activation regimes were used prior to ion nitriding: shot‑peening with steel microspheres 50–100 µm in diameter at speeds of 30–70 m/s; implanted ions—nitrogen; dose—1.3 × 1017 ions/cm2; dose rate—1 × 1015 ions/s; ion implantation energy – 25 keV. Magnetic‑pulse processing (MPP) was carried out with pulse energies from 2 to 8 kJ, pulse durations from 5 to 40 µs, and number of pulses from 2 to 5. It was shown that the most efficient preliminary surface‑activation method before nitriding is medium‑energy ion implantation, which allows increasing the wear resistance of the nitrided layer of 40Kh steel by a factor of 5.7 and of 40KhN steel by a factor of 4.5 compared with conventional ion nitriding.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Surface Treatment and Residual Stress · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Zaitsev, A.A., Development of rotary engine technologies in the interests of improving the performance characteristics of vehicles, Mashiny i Ustanovki: Proektirovanie, Razrabotka i Ekspluatatsiya, 2025, no. 1, pp. 55–69.
2. Grigor’ev, A.V., Nesterenko, G.A., Korneev, S.A., and Ovcharenko, S.M., The analysis of influence of constructive and regime parameters for operation of straighttooth rotor-type pump, Omskii Nauchnyi Vestnik, 2012, no. 1, pp. 86–88.
3. Tenenbaum, M.M., Soprotivlenie abrazivnomu iznashivaniyu (Abrasion Resistance), Moscow: Mashinostroenie, 1976.
4. Garkunov, D.N., Mel’nikov, E.L., and Gavrilyuk, V.S., Tribotekhnika (Triboengineering), Moscow: KnoRus, 2017, 2nd ed.
5. Goryacheva, I.G., Modeling of the intermediate layer effect on contact characteristics and wear of deformable solids in rolling friction, Trudy XV Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii Tribologiya—mashinostroeniyu (Proceedings of the 15th International Scientific-Technical Conference Tribology for the Mechanical Engineering), Moscow, 2024, Moscow: Institut Mashinovedeniya im. A.A. Blagonravova Rossiiskoi Akademii Nauk, 2024, pp. 61–63.
6. Lakhtin, Yu.M. and Arzamasov, B.M., Khimiko-termicheskaya obrabotka (Chemical-Thermal Treatment), Moscow: Metallurgiya, 1985.
7. Gerasimov, S.A., Kuksenova, L.I., Alekseeva, M.S., and Bakhirev, M.A., Nitriding of structural steels for tribotechnical destination and complex evaluation of the quality of treatment, Met. Sci. Heat Treat., 2020, vol. 62, nos. 1–2, pp. 119–126. https://doi.org/10.1007/s11041-020-00523-210.1007/s11041-020-00523-2 ↗
8. Vafin, R.K., Asylbaev, A.V., Mamontov, D.V., Sklizkov, I.D., Nagimov, R.Sh., and Ramazanov, K.N., Effect of surface plastic deformation of tool steel on ion-plasma nitriding in glow discharge, Uprochnyayushchie Tekhnol. Pokrytiya, 2024, vol. 20, no. 3, pp. 134–139. https://doi.org/10.36652/1813-1336-2024-20-3-134-13910.36652/1813-1336-2024-20-3-134-139 ↗
9. Sarafanov, G.F., Nucleation of microcracks during plastic deformation, Vestnik Tambovskogo Universiteta. Seriya: Estestvennye i Tekhnicheskie Nauki, 2013, vol. 18, no. 4, pp. 1583–1584.
10. Krioni, N.K., Ramazanov, K.N., Mingazheva, A.A., and Mingazhev, A.D., Effect of ion-implantation activation of surface of structural steels 40Kh and 40KhN on structure and properties of nitrided layer, Uprochnyayushchie Tekhnol. Pokrytiya, 2025, vol. 21, no. 3, pp. 120–123. https://doi.org/10.36652/1813-1336-2025-21-3-120-12310.36652/1813-1336-2025-21-3-120-123 ↗
11. Alifanov, A.V., Maleronok, V.V., Bogdanovich, I.A., Lyakh, A.A., Milyukova, A.M., and Tolkacheva, O.A., Studying the influence of magnetic impulse regimes temperature and structural transformations processing in the surface layers of fast-cutting steel samples, Vestnik Polotskogo Gosudarstvennogo Universiteta. Seriya B. Promyshlennost’. Prikladnye Nauki, 2021, no. 3, pp. 11–14.
12. Vorob’ev, R.A. and Dubinskii, V.N., A study of martensite decomposition in a 65G steel upon magnetic pulse treatment, Phys. Met. Metallogr., 2010, vol. 109, no. 3, pp. 261–264. https://doi.org/10.1134/s0031918x1003008710.1134/s0031918x10030087 ↗
13. Mingazhev, A.D., Krioni, N.K., and Mingazheva, A.A., Method for nitriding parts from alloyed steel, RF Patent 2 795 620, 2023.