Tribotechnical Characteristics of Vacuum-Arc Mo–S–Ti–C Coatings on VT5 Titanium Alloy, Formed with Assistant Influence of Gas-Discharge Plasma
Source abstract
Abstract
Abstract The aim of the work is to identify the most effective conditions and modes for the synthesis of Mo–S–Ti–C coatings on titanium alloy VT5, providing the best tribological characteristics. The coatings were applied by vacuum arc evaporation of cathodes on a modernized NNV-6.6-I1 installation. The cathodes were produced using self-propagating high-temperature synthesis. Assistance to the gas discharge plasma during coating application was provided by an autonomous plasma source with a heated cathode. In this case, the bias potential on the substrate, the deposition time, and the composition of the working gas environment, argon and/or a mixture of argon and nitrogen in a ratio of 1 : 1, were varied. It has been established that the use of assisting action of gas discharge plasma on deposited coatings provides a 2–3 times increase in their hardness. Using energy-dispersive X-ray spectroscopy, the presence of both sulfide-forming elements (Mo, S) and elements capable of forming solid carbides (Ti, C) was revealed in the evaporated cathodes and in the applied coatings. X-ray structural analysis confirmed the synthesis of compounds of the Mo2S3 and TiC type in both cathodes and coatings. In the most effective version of a three-layer coating using, along with argon, nitrogen in gas discharge plasma, the formation of a strengthening phase of TiN was also recorded. Tribological tests were carried out under friction conditions without lubricant. It was established that the most effective version of a three-layer coating with the addition of nitrogen in a gas discharge plasma, compared to the initial VT5 alloy, showed a decrease in the friction coefficient under a load on the counterbody of 1 N—by 2 times, under a load of 5 N—by 3 times; the wear rate in both cases decreased by an order of magnitude or more. Thus, the presented technological method ensures the formation of a gradient-layered coating architecture and appears promising for industrial application.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Osnovy raschetov na trenie i iznos (Fundamentals of Friction and Wear Analysis), Moscow: Mashinostroenie, 1977.
2. Renevier, N.M., Hamphire, J., Fox, V.C., Witts, J., Allen, T., and Teer, D.G., Advantages of using self-lubricating, hard, wear-resistant MoS2-based coatings, Surf. Coat. Technol., 2001, vols. 142–144, pp. 67–77. https://doi.org/10.1016/s0257-8972(01)01108-210.1016/s0257-8972(01)01108-2 ↗
3. Rahman, M., Haider, J., Dowling, D.P., Duggan, P., and Hashmi, M.S.J., Deposition of magnetron sputtered TiN + MoSx coating with Ti–TiN graded interlayer, Surf. Coat. Technol., 2005, vol. 200, nos. 1–4, pp. 1071–1075. https://doi.org/10.1016/j.surfcoat.2005.02.09610.1016/j.surfcoat.2005.02.096 ↗
4. Gangopadhyay, S., Acharya, R., Chattopadhyay, A.K., and Paul, S., Composition and structure–property relationship of low friction, wear resistant TiN–MoSx composite coating deposited by pulsed closed-field unbalanced magnetron sputtering, Surf. Coat. Technol., 2009, vol. 203, no. 12, pp. 1565–1572. https://doi.org/10.1016/j.surfcoat.2008.11.00410.1016/j.surfcoat.2008.11.004 ↗
5. Li, X., Zhang, Ya., Ji, L., Liu, X., Lu, L., Wang, Zh., Sun, Ch., and Li, H., Tribological properties and wear mechanism of molybdenum disulfide-carbon composite film under low temperature in vacuum, Tribol. Int., 2024, vol. 199, no. 199, p. 109926. https://doi.org/10.1016/j.triboint.2024.10992610.1016/j.triboint.2024.109926 ↗
6. Ren, Yi., Niu, Yu., Jia, J., Cao, X., and Zhang, G., Design and tribological performance of CrN/Mo2N/MoSx composite coating in wide temperature range inspired by oxidation kinetics principle, Tribol. Int., 2023, vol. 180, p. 108229. https://doi.org/10.1016/j.triboint.2023.10822910.1016/j.triboint.2023.108229 ↗
7. Ju, Sh., Ji, L., Liu, X., Zhao, X., Zhou, H., Chen, J., Li, H., and Li, J., The effect of LaF3 in enhancing the atomic-oxygen-resistance of molybdenum-disulfide-based solid lubricant films, Tribol. Int., 2024, vol. 192, p. 109259. https://doi.org/10.1016/j.triboint.2024.10925910.1016/j.triboint.2024.109259 ↗
8. Chen, H., Wang, W., Le, K., Liu, Yu., Gao, X., Luo, Yo., Zhao, X., Liu, X., Xu, Sh., and Liu, W., Effects of substrate roughness on the tribological properties of duplex plasma nitrided and MoS2 coated Ti6Al4V alloy, Tribol. Int., 2024, vol. 191, p. 109123. https://doi.org/10.1016/j.triboint.2023.10912310.1016/j.triboint.2023.109123 ↗
9. Prozhega, M.V., Reschikov, E.O., Konstantinov, E.O., Kharkov, M.M., and Grigoriev, F.A., Tribological properties of antifriction molybdenum disulfide coatings under extreme conditions, J. Frict. Wear, 2022, vol. 43, no. 6, pp. 423–430. https://doi.org/10.3103/s106836662206012510.3103/s1068366622060125 ↗
10. Savostikov, V.M., Tabachenko, A.N., Potekaev, A.I., and Dudarev, E.F., Application of antifriction wear-proof coat on titanium alloys, RF Patent 2 502 828, 2013.
11. Savostikov, V.M., Leonov, A.A., Denisov, V.V., Denisova, Yu.A., Savchuk, M.V., Skosyrskii, A.B., Syrtanov, M.S., and Pirozhkov, A.V., Formation of a Zr + ZrxNy + (Zr + TiBSiNi)N + (TiBSiNi)N gradient-layered coating based on physical and tribotechnical characteristics of constituent layers, Russ. Phys. J., 2024, vol. 67, no. 8, pp. 1090–1099. https://doi.org/10.1007/s11182-024-03220-210.1007/s11182-024-03220-2 ↗