Mechanical and Mathematical Evaluation of the Influence of Wire Mechanical Properties on Helical Cylindrical Compression Springs Wear Resistance
Source abstract
Abstract
Abstract A common defect of springs is a decrease in their wear resistance due to changes in the mechanical properties of the wire along its length, particularly the yield strength, including under friction during operation of the spring. According to the springs stress-strain state presented mathematical model, the wire yield strength changes effect on springs wear resistance during contact hardening is investigated. The residual springs deformation dependence graph on the yield strength of its material for different wire diameters is constructed. Dispersion of the spring wire yield strength in the coil according to state standards 9389, carbon steel spring wire can be up to 200–250 MPa. It is established that in this case, the manufactured springs deformation dispersion will amount to 11.76% and exceed the permissible values. For first precision group springs, the permissible deviations for deformation dispersion are ±5%, for second precision group springs, ±10%. The wire change in the yield strength effect graph along the length on the dispersion of spring deformation for a load of 140F3 (F3 is spring compression force when coils come into contact) is constructed. Using the presented technique and taking into account the dispersion of spring deformation depending on the change in the wire along the length yield strength, including due to friction during operation, it is possible to significantly reduce the percentage of defects in the manufacturing and increase helical cylindrical compression springs wear resistance.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Mechanical Failure Analysis and Simulation · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Yetgin, A., Karakaş, A., Acar, B., and Özaslan, E., Failure analysis of a helical compression spring with relatively low spring index, Eng. Failure Anal., 2024, vol. 165, p. 108798. https://doi.org/10.1016/j.engfailanal.2024.10879810.1016/j.engfailanal.2024.108798 ↗
2. Cabal, M.R., Noreña, L.G., Montoya, O.D., Hincapie, D., and Caicedo, B.C., Optimal design of helical springs using metaheuristic techniques, Mathematical Modelling of Engineering Problems, 2024, vol. 11, no. 10, pp. 2595–2605. https://doi.org/10.18280/mmep.11100110.18280/mmep.111001 ↗
3. Arslan, E. and Genel, K., Failure analysis of automotive helical spring, Eng. Failure Anal., 2023, vol. 153, p. 107569. https://doi.org/10.1016/j.engfailanal.2023.10756910.1016/j.engfailanal.2023.107569 ↗
4. Ruiz, E., Ferreño, D., Cuartas, M., Arroyo, B., Carrascal, I.A., Rivas, I., and Gutiérrez-Solana, F., Application of machine learning algorithms for the optimization of the fabrication process of steel springs to improve their fatigue performance, Int. J. Fatigue, 2022, vol. 159, p. 106785. https://doi.org/10.1016/j.ijfatigue.2022.10678510.1016/j.ijfatigue.2022.106785 ↗
5. Boungomba, H., Moreau, P., Sadat, T., Lilensten, L., Dubar, M., and Dubar, L., Investigation of the impact of AISI D2 tool steel wear and lubrication type on the evolution of the friction coefficient during cold winding process, Wear, 2024, vols. 542–543, p. 205272. https://doi.org/10.1016/j.wear.2024.20527210.1016/j.wear.2024.205272 ↗
6. Li, L., Xu, Q., Yang, H., Ying, Ya., Cao, Z., Guo, D., and Ji, V., Design and rate control of large titanium alloy springs for aerospace applications, Aerospace, 2024, vol. 11, no. 7, p. 514. https://doi.org/10.3390/aerospace1107051410.3390/aerospace11070514 ↗
7. Yan, Ch., Li, S., and Zhavner, M.V., Method and apparatus for determining the internal friction of a spring accumulator, Transportnoe, Gornoe i Stroitel’noe Mashinostroenie: Nauka i Proizvodstvo, 2024, no. 26, pp. 40–46. https://doi.org/10.26160/2658-3305-2024-26-40-4610.26160/2658-3305-2024-26-40-46 ↗
8. Belkov, E.G., Tekhnologiya izgotovleniya i uprochneniya pruzhin. Monografiya (Spring Manufacturing and Strengthening Technology: A Monograph), Chelyabinsk: Yuzhno-Ural’skii Gosudarstvennyi Universitet (Natsional’nyi Issledovatel’skii Universitet), 2013.
9. Hu, J., Chen, X., and Wang, Ya., Stress relaxation mechanism and life evaluation of titanium alloy springs under long-term thermo-mechanical coupling conditions, Mater. Today Commun., 2024, vol. 38, p. 108472. https://doi.org/10.1016/j.mtcomm.2024.10847210.1016/j.mtcomm.2024.108472 ↗
10. Liu, Ya., Wen, Z., Wu, X., Peng, B., Zhou, Ya., and Tao, G., Investigation of fatigue durability and influencing factors of coil springs: A case study for metro vehicles, Int. J. Fatigue, 2024, vol. 187, p. 108469. https://doi.org/10.1016/j.ijfatigue.2024.10846910.1016/j.ijfatigue.2024.108469 ↗
11. Kukhar, V.D., Korotkov, V.A., Yakovlev, S.S., Shishkina, A.A., and Goncharov, S.S., Corrugation by local plastic deformation, Russ. Eng. Res., 2024, vol. 44, no. 3, pp. 343–345. https://doi.org/10.3103/s1068798x2470031x10.3103/s1068798x2470031x ↗
12. Xia, B., Wang, B., Zhang, P., Ren, Ch., Duan, Q., Li, X., and Zhang, Zh., Improving the high-cycle fatigue life of a high-strength spring steel for automobiles by suitable shot peening and heat treatment, Int. J. Fatigue, 2022, vol. 161, p. 106891. https://doi.org/10.1016/j.ijfatigue.2022.10689110.1016/j.ijfatigue.2022.106891 ↗
13. Zemlyanushnova, N.Yu., Raschet vintovykh tsilindricheskikh pruzhin szhatiya pri kontaktnom zanevolivanii. Monografiya (Calculation of Screw Cylindrical Compression Springs under Contact Loading: A Monograph), Stavropol: AGRUS, 2008.
14. Zemlyanushnov, N.A. and Zemlyanushnova, N.Y., To increase wear resistance of screw cylindrical compression springs working with coil contacts, J. Frict. Wear, 2024, vol. 45, no. 3, pp. 160–166. https://doi.org/10.3103/s106836662470024710.3103/s1068366624700247 ↗
15. Ponomarev, S.D. and Andreeva, L.E., Raschet uprugikh elementov mashin i priborov (Analysis of Elastic Elements of Machines and Devices), Moscow: Mashinostroenie, 1980.