journal article·2025-04

Wear Resistance of Tool Steels during Dry Sliding Friction

D. I. Kotov, A. A. Bataev, I. A. Bataev, K. M. Zubashevskij, K. I. Emurlaev, V. S. Shikalov

Journal of Friction and Wear· Volume 46· Issue 2
Publisher page

Abstract

Abstract Tribological studies of 5KhNM, 11Kh4V2MF3S2, and 95Kh6M3F3ST steels have been performed under dry sliding friction conditions in pairs of a steel disk–TT10K8B hard alloy pin at a pressure of 40 MPa. The test scheme has been based on the reciprocating movement of a steel sample relative to a carbide counterbody at a speed of 0.1 m/s. The test time for each sample was 10 h. The value of linear wear of friction pair elements has been used as a resistance criterion in the process of sliding friction. Minimal wear under dry sliding friction conditions in a pair with a TT10K8B hard alloy indenter has been recorded when testing samples of 11Kh4V2MF3S2 high-carbon tool steel after hardening from 1060°C and three-fold tempering at 525°C. The value of the total linear wear in the friction pair 11Kh4V2MF3S2 steel–TT10K8B hard alloy is four times less compared to that of the pair 5KhNM steel–TT10K8B hard alloy.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Advanced machining processes and optimization · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. Stoyanovskij, O.I., Galutskij, V.G., and Cherendin, A.F., Installation for testing dry friction pair for wear during reciprocation, RF Patent 2 745 799, 2021.
2. Tykhonovych, V.V., Effect of chromium steels alloying with molybdenum on the wear-resistant ultrafine coatings formation during the working of friction units in different technological environments, Metallofiz. Noveishie Tekhnol., 2019, vol. 41, no. 9, pp. 1231–1260. https://doi.org/10.15407/mfint.41.09.123110.15407/mfint.41.09.1231 ↗
3. Krutskii, Yu.L., Gudyma, T.S., Kuchumova, I.D., Khabirov, R.R., and Antropova, K.A., Carbides of transition metals: Properties, application and production. review. Part 1. Titanium and vanadium carbides, Steel Transl., 2022, vol. 52, no. 5, pp. 465–478. https://doi.org/10.3103/s096709122205005910.3103/s0967091222050059 ↗
4. Gol’dshtein, M.I., Litvinov, V.S., and Bronfin, B.M., Metallofizika vysokoprochnykh splavov (Metallophysics of High Strength Alloys), Moscow: Metallurgiya, 1986.
5. Arabacı, U., The effects of oil-quenching and over-tempering heat treatments on the dry sliding wear behaviours of 25CrMo4 steel, Heliyon, 2024, vol. 10, no. 3, p. e25589. https://doi.org/10.1016/j.heliyon.2024.e2558910.1016/j.heliyon.2024.e25589 ↗
6. Kalandyk, B., Zapała, R., Madej, M., Kasińska, J., and Piotrowska, K., Influence of pre-hardened GX120Mn13 cast steel on the tribological properties under technically dry friction, Tribologia, 2022, vol. 301, no. 3, pp. 17–24. https://doi.org/10.5604/01.3001.0016.102010.5604/01.3001.0016.1020 ↗
7. Gol’dshtein, M.I. and Farber, V.M., Dispersionnoe uprochnenie stali (Dispersion Hardening of Steel), Moscow: Metallurgiya, 1979.
8. Korshunov, L.G. and Chernenko, N.L., Structural transformations and tribological effects in the surface layer of austenitic chrome-nickel steel initiated by nanostructuring and oxidation, J. Surf. Invest.: X-ray, Synchrotron Neutron Tech., 2020, vol. 14, no. 3, pp. 632–638. https://doi.org/10.1134/s102745102003030110.1134/s1027451020030301 ↗
9. Fadin, V.V., Aleutdinova, M.I., Potekaev, A.I., and Kulikova, O.A., The surface layer states in metallic materials subjected to dry sliding and electric current, Russ. Phys. J., 2017, vol. 60, no. 5, pp. 908–914. https://doi.org/10.1007/s11182-017-1156-x10.1007/s11182-017-1156-x ↗
10. Kolubaev, A.V., Tarasov, S.Yu., Sizova, O.V., Kolubaev, E.A., and Ivanov, Yu.F., The evolution of the surface layers on metals in sliding friction, J. Frict. Wear, 2007, vol. 28, no. 6, pp. 514–520. https://doi.org/10.3103/s106836660706005010.3103/s1068366607060050 ↗
11. Stechyshyn, M.S., Skyba, M.Ye., Martynyuk, A.V., and Zdorenko, D.V., Wear resistance of structural steels nitrided in a cyclically switched discharge with dry friction, Problems of Tribology, 2023, vol. 28, no. 1/107, pp. 20–24. https://doi.org/10.31891/2079-1372-2023-107-1-20-2410.31891/2079-1372-2023-107-1-20-24 ↗
12. Hurey, I., Maruschak, P., Augousti, A., Flowers, A., Gurey, V., Dzyura, V., and Prentkovskis, O., Resistance to wear during friction without lubrication of steel-cast iron pairing with nanocrystalline structure-reinforced surface layers, Lubricants, 2023, vol. 11, no. 10, p. 418. https://doi.org/10.3390/lubricants1110041810.3390/lubricants11100418 ↗
13. Deng, S.Q., Godfrey, A., Liu, W., and Zhang, C.L., Microstructural evolution of pure copper subjected to friction sliding deformation at room temperature, Mater. Sci. Eng., A, 2015, vol. 639, pp. 448–455. https://doi.org/10.1016/j.msea.2015.05.01710.1016/j.msea.2015.05.017 ↗