Laser Treatment Influence on Tribotechnical Properties of 45 Steel
Source abstract
Abstract
Abstract— The influence of technological parameters of laser processing on tribotechnical characteristics of 45 steel has been investigated, allowing to develop recommendations for obtaining maximum wear resistance. The influence of laser processing modes (pump current I, pulse duration τ) on the values of energy in the pulse E transferred to the surface to be processed has been evaluated. Changing the current strength in the range of 60–120 A and pulse time from 5 to 25 ms allowed us to obtain the change of energy in the pulse in the range from 0.3 to 4.1 J. It was found that tribotechnical properties of the surface treated with the same energy, but different modes of exposure differ. The wear resistance of the sample was estimated by the width of the friction track. It was found that the influence of pulse duration on tribotechnical characteristics is extreme: at a pumping current of 60 A the minimum friction coefficient and maximum wear resistance were obtained at pulse duration of 20 ms. Increase of pulse duration more than 20 ms leads to lamellar fragments peeling off on the surface and deterioration of tribotechnical parameters.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Surface Treatment and Coatings · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Vedernikova, I.I. and Poletaev, V.A., Primenenie lazernogo modifitsirovaniya dlya uprochneniya rabochikh poverkhnostei detalei mashin, Journal of Advanced Research in Technical Science, 2019, no. 15, pp. 18–25. https://doi.org/10.26160/2474-5901-2019-15-18-2510.26160/2474-5901-2019-15-18-25 ↗
2. Grigor’yants, A.G., Shiganov, I.N., and Misyurov, A.I., Tekhnologicheskie protsessy lazernoi obrabotki. Uchebnoe posobie (Technological Processes of Laser Processing: A Training Manual), Grigor’yants, A.G., Ed., Moscow: Moskovskii Gosudarstvennyi Tekhnicheskii Universitet im. N.E. Baumana, 2006.
3. Astapchik, S.A., Golubev, V.S., and Maklakov, A.G., Lazernye tekhnologii v mashinostroenii i metalloobrabotke (Laser Technologies in Mechanical Engineering and Metalworking), Minsk: Belarusskaya Navuka, 2008.
4. Belyi, A.V., Kalinichenko, A.S., Kukareko, V.A., and Devoino, O.G., Inzheneriya poverkhnostei konstruktsionnykh materialov s ispol’zovaniem plazmennykh i puchkovykh tekhnologii (Surface Engineering of Structural Materials Using Plasma and Beam Technologies), Minsk: Belorusskaya Nauka, 2017.
5. Zhang, H., Shi, Y., Xu, C.Y., and Kutsuna, M., Surface hardening of gears by laser beam processing, Surf. Eng., 2003, vol. 19, no. 2, pp. 134–136. https://doi.org/10.1179/02670840322500259510.1179/026708403225002595 ↗
6. Mordike, B.L., Improvement of wear properties by laser surface treatment, Proceedings of the 3rd European Conference on Laser Treatment of Materials. ECLAT’90, Bergmann, H.W. and Kupfer, R., Eds., 1990, vol. 1, pp. 371–376.
7. Safonov, A.N., Structure and properties of the surface of iron–carbon alloys melted by laser radiation, Met. Sci. Heat Treat., 1999, vol. 41, no. 1, pp. 7–11. https://doi.org/10.1007/bf0246626210.1007/bf02466262 ↗
8. Petrochenko, S.V., Hao, Q., Yu, X., and Zhao, K., Evaluation of the influence of laser quenching mode parameters on the quality of the surface and surface layer of machine parts (overview), Omskii Nauchnyi Vestnik, 2024, no. 1, pp. 56–65. https://doi.org/10.25206/1813-8225-2024-189-56-6510.25206/1813-8225-2024-189-56-65 ↗
9. Ogin, P.A., Merson, D.L., and Yaresko, S.I., The influence of laser emission and beam velocity on the geometry of flashing zone during laser hardening of 40Kh steel, Vektor Nauki Tol’yattinskogo Gosudarstvennogo Universiteta, 2016, no. 2, pp. 46–51. https://doi.org/10.18323/2073-5073-2016-2-46-5110.18323/2073-5073-2016-2-46-51 ↗
10. Afanas’eva, L.E., Barabonova, I.A., Botyanov, E.V., Ratkevich, G.V., and Grechishkin, R.M., Structural phase transitions in high-speed steel at laser surface melting treatment with multichannel CO2 laser, Uprochnyayushchie Tekhnol. Pokrytiya, 2013, no. 8, pp. 10–13.
11. Myshkovets, V.N., Maksimenko, A.V., Shalupaev, S.V., and Yurkevich, S.N., Laser unit with fiber optic attachment and welding processes for stainless steel products, Mater., Tekhnol., Instrum., 2003, no. 4, pp. 84–87.
12. Bren’ko, A.A., Myshkovets, V.N., Maksimenko, A.V., Rybin, V.I., Tuchin, A.N., Yurkevich, S.N., and Prishchepov, E.G., Laser processing unit, RF Patent 34426, 2003.
13. Grigoriev, A.Ya., Gutsev, D.M., Zozulya, A.P., Kovaliova, I.N., Kudritskii, V.G., Myshkin, N.K., and Semenyuk, M.S., Reciprocating MTU-2K7 millitribometer, J. Frict. Wear, 2014, vol. 35, no. 6, pp. 455–459. https://doi.org/10.3103/s106836661406006310.3103/s1068366614060063 ↗
14. Kovalenko, V.S., Golovko, L.F., and Chernenko, V.S., Uprochnenie i legirovanie detalei mashin luchom lazera (Hardening and Plating of Machine Parts by Laser Beam), Kiev: Tekhnika, 1990.