journal article·2025-02

Wear Resistance of Ti–Mo–Si Coatings Formed by Electric Spark Alloying on Ti–6Al–4V Titanium Alloy

A. A. Burkov, M. A. Kulik, A. Yu. Bytsura, V. O. Krutikova

Journal of Friction and Wear· Volume 46· Issue 1
Publisher page

Abstract

Abstract Ti–Mo–Si coatings for protection of Ti–6Al–4V titanium alloy from wear and high-temperature oxidation applied by electrospark alloying are studied. To form the Ti–Mo–Si coating, a non-localized electrode consisting of titanium granules with the addition of silicon and molybdenum powders is used. A Dron-7 X-ray diffractometer in CuKα radiation is used to study the phase composition of the coatings. According to the X-ray phase analysis data, the phases of αTi, Mo, Ti5Si3, and TiSi2 are found in the coating composition. The average thickness of the prepared coatings is in the range from 31.70 to 40.97 μm. According to the energy dispersive analysis, titanium predominated in the coating composition, the concentration of molybdenum reached 18 at %, and silicon, 9 at %. It is shown that silicon particles participated disproportionately less in the formation of the coating compared to molybdenum particles. Heat resistance testing shows that the use of the developed Ti–Mo–Si coatings allows increasing the heat resistance of the Ti–6Al–4V titanium alloy at a temperature of 900°C by up to 5.7 times. The microhardness of the Ti–Mo–Si coating surface is in the range from 5.81 to 9.88 GPa. It is found that with an increase in the silicon to molybdenum ratio in the non-localized electrode, the average values of the friction coefficient of the coatings in the dry sliding mode monotonically increase from 0.81 to 0.86. The use of Ti–Mo–Si coatings allows reducing the surface wear of titanium alloy products by up to 19 times. The coating with the highest silicon content demonstrates the highest hardness, wear resistance, and heat resistance.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Surface Treatment and Coatings · Intermetallics and Advanced Alloy Properties · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Dai, J., Zhu, J., Chen, Ch., and Weng, F., High temperature oxidation behavior and research status of modifications on improving high temperature oxidation resistance of titanium alloys and titanium aluminides: A review, J. Alloys Compd., 2016, vol. 685, pp. 784–798. https://doi.org/10.1016/j.jallcom.2016.06.21210.1016/j.jallcom.2016.06.212 ↗
2. Shafyei, H., Salehi, M., and Bahrami, A., Fabrication, microstructural characterization and mechanical properties evaluation of Ti/TiB/TiB2 composite coatings deposited on Ti6Al4V alloy by electro-spark deposition method, Ceram. Int., 2020, vol. 46, no. 10, pp. 15 276–15 284. https://doi.org/10.1016/j.ceramint.2020.03.06810.1016/j.ceramint.2020.03.068 ↗
3. Kudryashov, A.E., Zamulaeva, E.I., Kiryukhantsev-Korneev, Ph.V., Mukanov, S.K., Ageev, M.I., Petrzhik, M.I., and Levashov, E.A., Formation features of electrospark coatings on chromium substrate using ZrSi2–MoSi2–ZrB2 and HfSi2–MoSi2–HfB2 ceramic electrodes, Surf. Eng. Appl. Electrochem., 2024, vol. 60, no. 6, pp. 717–727. https://doi.org/10.3103/s106837552470030310.3103/s1068375524700303 ↗
4. Lu, Q., Hao, Ya., Wang, Yu., Feng, P., and Fan, J., Microstructural evolution and high-temperature oxidation mechanisms of a Ti–Mo–Si composite, Corros. Sci., 2019, vol. 161, p. 108180. https://doi.org/10.1016/j.corsci.2019.10818010.1016/j.corsci.2019.108180 ↗
5. El-Sayed Seleman, M.M., Ataya, S., Aly, H.A., Haldar, B., Alsaleh, N.A., Ahmed, M.M.Z., Bakkar, A., and Ibrahim, Kh.M., Effect of the Si content on the dry and wet sliding wear behavior of the developed Ti–15Mo–(0-2) Si alloys for biomedical applications, Metals, 2023, vol. 13, no. 11, p. 1861. https://doi.org/10.3390/met1311186110.3390/met13111861 ↗
6. Li, Ch., Zhan, Yo., Mo, Ya., and She, J., In situ synthesized Ti5Si3/Ti–Mo lightweight structural composites, Int. J. Refract. Met. Hard Mater., 2013, vol. 41, pp. 432–436. https://doi.org/10.1016/j.ijrmhm.2013.05.01910.1016/j.ijrmhm.2013.05.019 ↗
7. Li, F., Zhang, P., Wei, D., Tian, T., Chen, X., Wang, Sh., Ding, F., Yang, K., and Dang, B., The influence of loading rate and hold time on the nano-mechanical properties of γ-TiAl and plasma Mo–Si–Ti coating, J. Mater. Eng. Perform., 2022, vol. 31, no. 9, pp. 7368–7381. https://doi.org/10.1007/s11665-022-06754-z10.1007/s11665-022-06754-z ↗
8. Li, L., Guo, X., and Qiao, Ya., A novel composite Si–Mo–Ti coating with Ti concentration gradient for Nb–Si based ultrahigh temperature alloy prepared by slurry sintering, Corros. Sci., 2023, vol. 225, p. 111632. https://doi.org/10.1016/j.corsci.2023.11163210.1016/j.corsci.2023.111632 ↗
9. Verkhoturov, A.D., Podchernyaeva, I.A., Panashenko, V.M., and Konevtsov, L.A., Elektroiskrovoe legirovanie titana i ego splavov metallami i kompozitsionnymi materialami (Electrospark Augmentation of Titanium and Its Alloys with Metals and Composite Materials), Komsomolsk-on-Amur: Institut Mashinovedeniya i Metallurgii, 2014.
10. Nikolenko, S.V., Suy, N.A., Pugachevskii, M.A., and Metlitskaya, L.P., Superhigh-speed extrusion of tungsten-free electrodes for electrospark alloying of steel 45, Russ. Eng. Res., 2013, vol. 33, no. 5, pp. 258–264. https://doi.org/10.3103/s1068798x1305011010.3103/s1068798x13050110 ↗
11. Burkov, A.A., Kulik, M.A., Bytsura, A.Yu., and Ermakov, M.A., Wear-resistant Cr–Fe–Al2O3 coating deposition on steel 35 using aluminum oxide powder, J. Frict. Wear, 2023, vol. 44, no. 6, pp. 346–353. https://doi.org/10.3103/s106836662306003x10.3103/s106836662306003x ↗
12. Burkov, A.A., Chigrin, P.G., and Dvornik, M.I., Electrospark Cu–Ti coatings on titanium alloy Ti6Al4V: Corrosion and wear properties, Surf. Coat. Technol., 2023, vol. 469, p. 129796. https://doi.org/10.1016/j.surfcoat.2023.12979610.1016/j.surfcoat.2023.129796 ↗
13. Litvinov, E.A., Mesyats, G.A., and Proskurovskiĭ, D.I., Field emission and explosive electron emission processes in vacuum discharges, Sov. Phys. Usp., 1983, vol. 26, no. 2, pp. 138–159. https://doi.org/10.1070/pu1983v026n02abeh00432210.1070/pu1983v026n02abeh004322 ↗
14. Burkov, A.A., Kulik, M.A., and Krutikova, V.O., Characteristics of Ti–Si coatings on Ti6Al4V alloy subjected to electrospark granules deposition, Tsvetn. Met., 2019, no. 4, pp. 54–59. https://doi.org/10.17580/tsm.2019.04.0710.17580/tsm.2019.04.07 ↗
15. Li, F., Rawat, R.S., Zhang, P., Wei, D., Yang, K., and Dang, B., Mechanical properties and reciprocating sliding tribological behaviors of γ-TiAl substrate and plasma-based Mo–Si–Ti coating, J. Mater. Res. Technol., 2023, vol. 26, pp. 1469–1483. https://doi.org/10.1016/j.jmrt.2023.07.26110.1016/j.jmrt.2023.07.261 ↗