Simulating the Rolling of a Rotor Over a Stator with Dry Friction Whip and Whirl
Source abstract
Abstract
Abstract The article is dedicated to the calculation of the acting forces and amplitude–frequency characteristics of the “rotor–stator” system in a state of frictional contact. Unlike known approaches, the normal pressure force between the rotor and stator is defined not only by the elasticity and damping of their materials at the contact point and/or the stator supports but also by the bending complex stiffness of the entire rotor, which can be conceptually treated as having an additional bearing with a clearance. This quasi-static reaction of the rotor to contact with the stator, initially characterized by Coulomb friction during slipping, is extended to dynamic contact with rolling friction of the rotor over the stator, which depends on the normal pressure force between them. In the proposed mathematical model and the practical example considered, the rolling equations are formulated and solved in matrix form concerning the precession speed and rotor displacements, based on system (interconnected with the stator) elastic-inertial characteristics, as well as coefficients of slipping and rolling friction, and internal and external losses. The calculations established finite ranges of possible angular velocities for uninterrupted rolling of the rotor over the stator and demonstrated the possibility of eliminating it by adjusting just two parameters of the system: the damping coefficient of the rotor and the modulus of elasticity of the stator’s contact surface.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Tribology and Lubrication Engineering · Modeling, Simulation, and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Denisov, G.G., Neimark, Yu.I., Sandalov, V.M., and Tsvetkov, Yu.V., About rotor running over a rigid bearing, Izvestiya AN SSSR. Mekhanika Tverdogo Tela, 1973, no. 6, pp. 4–13.
2. Banakh, L.Ya., Some phenomena occurring when a shaft moves in a bearing with clearance, Mashinovedenie, 1965, no. 1, pp. 70–77.
3. Bartha, A.R., Dry friction backward whirl of rotors, PhD Dissertation, Zürich: ETH, 2000.
4. Childs, D.W. and Bhattacharya, A., Prediction of dry-friction whirl and whip between a rotor and a stator, Journal of Vibration and Acoustics, 2007, vol. 129, no. 3, pp. 355–362. https://doi.org/10.1115/1.273141210.1115/1.2731412 ↗
5. Grāpis, O., Tamužs, V., Ohlson, N.-G., and Andersons, J., Overcritical high-speed rotor systems, full annular rub and accident, J. Sound Vib., 2006, vol. 290, nos. 3–5, pp. 910–927. https://doi.org/10.1016/j.jsv.2005.04.03110.1016/j.jsv.2005.04.031 ↗
6. Jiang, J. and Ulbrich, H., The physical reason and the analytical condition for the onset of dry whip in rotor-to-stator contact systems, Journal of Vibration and Acoustics, 2005, vol. 127, no. 6, pp. 594–603. https://doi.org/10.1115/1.188859210.1115/1.1888592 ↗
7. Wilkes, J.C., Childs, D.W., Dyck, B.J., and Phillips, S.G., The numerical and experimental characteristics of multimode dry-friction whip and whirl, J. Eng. Gas Turbines Power, 2010, vol. 132, no. 5, p. 052503. https://doi.org/10.1115/1.320465810.1115/1.3204658 ↗
8. Nashif, A.D., Jones, D.I.G., and Henderson, J.P., Vibration Damping, Wiley, 1985.
9. Allan, R.K., Rolling Bearings, Sir Isaac Pitman & Sons, 1946.
10. Bochkaryov, D.I., Pranevich, I.I., Lapushkin, A.S., Postnikov, A.S., and Kuzmenko, O.V., The influence of track foundation stiffness on the resistance to movement of rolling stock, J. Frict. Wear, 2021, vol. 42, no. 5, pp. 383–390. https://doi.org/10.3103/s106836662105002010.3103/s1068366621050020 ↗
11. Hibbeler, R.C., Engineering Mechanics: Statics & Dynamics, Singapore: Pearson Prentice Hall, 2007, pp. 441–442.
12. Tikhomirov, V.P., Gorlenko, A.O., Izmerov, M.A., and Erokhin, A.N., Static load capacity of spherical plain bearing, Vestnik Bryanskogo Gosudarstvennogo Tekhnicheskogo Universiteta, 2017, no. 5, pp. 56–65. https://doi.org/10.12737/article_59b11cb8d75888.7888056910.12737/article_59b11cb8d75888.78880569 ↗
13. Galakhov, M.A. and Burmistrov, A.N., Raschet podshipnikovykh uzlov (Calculation of Bearing Units), Moscow: Mashinostroenie, 1988.
14. Nikiforov, A.N., Prikladnaya poluempiricheskaya teoriya bezotryvnogo dvizheniya rotora po statoru (Applied Semiempirical Theory of Uninterrupted Rotor-Stator Motion), St. Petersburg: Super, 2021.
15. Nelson, H.D., A finite rotating shaft element using Timoshenko beam theory, J. Mech. Des., 1980, vol. 102, no. 4, pp. 793–803. https://doi.org/10.1115/1.325482410.1115/1.3254824 ↗