journal article·2025-02

Thermomechanical Wear of Organic Metallopolymer Composites

F. F. Yusubov

Journal of Friction and Wear· Volume 46· Issue 1
Publisher page

Abstract

Abstract— Wear mechanisms of organic composite materials with low content of metallic elements for braking systems of medium and heavy loading have been studied. The tests were carried out on the “finger–disc” scheme on the MMW-1 friction machine. The thermal effect during friction was modelled by the finite element method with focus on heat distribution on the surface. It was found that the sliding speed has the greatest influence on the wear intensity and constitutes 52.24%. A decrease in the friction coefficient at temperatures above 490°C was observed. Materials with high Cu–C content (20 wt %) showed less wear and lower friction coefficients due to graphite, while materials with low Cu–C content (5 wt %) were subjected to more pronounced abrasive wear due to overheating. Composites with 25 wt % binder also showed signs of abrasion, while at 35 wt % binder content the surface was characterized by a more uniform topography. However, the increased binder content led to local thermal failure, which manifested itself in the form of cracks and surface damage. The practical significance lies in the possibility of optimization of materials to improve their wear resistance at high temperatures and loads.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Brake Systems and Friction Analysis · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Tavangar, R., Moghadam, H.A., Khavandi, A., and Banaeifar, S., Comparison of dry sliding behavior and wear mechanism of low metallic and copper-free brake pads, Tribol. Int., 2020, vol. 151, p. 106416. https://doi.org/10.1016/j.triboint.2020.10641610.1016/j.triboint.2020.106416 ↗
2. Grigorchik, A.N. and Kukareko, V.A., Substructural changes in the surface layers of composite gas-thermal Cu–(Al–Si) coatings during friction under various conditions, J. Frict. Wear, 2024, vol. 45, no. 3, pp. 140–146. https://doi.org/10.3103/S106836662470021110.3103/S1068366624700211 ↗
3. Brundukov, A.S. and Kavaliova, Ya.A., Experimental evaluation of wear resistance of polymer materials used in piston compressor equipment, Mekhanika Mashin, Mekhanizmov i Materialov, 2024, no. 1, pp. 65–70. https://doi.org/10.46864/1995-0470-2024-1-66-65-7010.46864/1995-0470-2024-1-66-65-70 ↗
4. Gérard, M., The Thermomechanics of Nonlinear Irreversible Behaviors: An Introduction, World Scientific, 1999.
5. Bhushan, B., Frictional heating and contact temperatures, Modern Tribology Handbook, Boca Raton, FL: CRC Press, 2000, vol. 1, pp. 265–302. https://doi.org/10.1201/9780849377877-1410.1201/9780849377877-14 ↗
6. Frangieh, J., Desplanques, Ya., Mann, R., and Dufrenoy, P., Downscaling for disc-brake wear testing using a thermomechanical approach, Mech. Ind., 2023, vol. 24, p. 24. https://doi.org/10.1051/meca/202301610.1051/meca/2023016 ↗
7. Nakahara, T., A model of seizure based on Burwell and Strang’s concept of wear mode transition, Life Cycle Tribology, Dowson, D., Priest, M., Dalmaz, G., and Lubrecht, A.A., Eds., Tribology and Interface Engineering Series, vol. 48, Elsevier, 2005, pp. 547–553. https://doi.org/10.1016/s0167-8922(05)80056-210.1016/s0167-8922(05)80056-2 ↗
8. Ghosh, P., Naskar, K., and Das, N.Ch., Enhancement of tribological and thermo-mechanical properties of phenolic resin friction composites by improving interactions between elastomeric phase and matrix resin, SN Appl. Sci., 2020, vol. 2, no. 11, p. 1912. https://doi.org/10.1007/s42452-020-03728-510.1007/s42452-020-03728-5 ↗
9. Bao, J., Zhu, Zh., Tong, M., and Yin, Ya., Dynamic friction heat model for disc brake during emergency braking, Adv. Sci. Lett., 2011, vol. 4, no. 11, pp. 3716–3720. https://doi.org/10.1166/asl.2011.188210.1166/asl.2011.1882 ↗
10. Jara, D.Ch. and Jang, H., Synergistic effects of the ingredients of brake friction materials on friction and wear: A case study on phenolic resin and potassium titanate, Wear, 2019, vols. 430–431, pp. 222–232. https://doi.org/10.1016/j.wear.2019.05.01110.1016/j.wear.2019.05.011 ↗