The Influence of Water Vapor Flow Parameters on the Erosive Wear of Oxide Coatings of a Tube Sheet in a Lead Coolant Environment
Source abstract
Abstract
Abstract— The article presents the results of experimental studies of the durability of protective oxide coatings of 12X18N10T stainless steel in a lead coolant environment, when simulating an emergency situation of “intercircuit leakage of a steam generator.” The tests were carried out on the FTM-2023 NSTU stand in a lead coolant with a temperature of up to 430–450°C without circulation. The tube bundle for simulating a steam generator leak during the outflow of the light phase is two rows of 22 × 3.5 pipes welded to a plate with a pitch of 33 mm. The data were obtained for tube bundles with two different types of holes for the outflow of the vapor phase: a slit hole of 13 × 1 mm and a round hole with a diameter of 4 mm. The processing and analysis of the results allowed us to conclude that when a steam-water mixture enters the heavy liquid metal coolant circuit, the oxide coatings become thinner depending on the location of the tube in the bundle and the shape of the discharge hole. There is a noticeable decrease in microhardness (by 49 HV for a tube bundle with a round discharge hole and by 23 HV for a tube bundle with a rectangular discharge hole), which is more pronounced when approaching the discharge hole and depends on the orientation of the tube surface onto which the mixture enters, relative to the leak. The data are recommended for use in assessing the consequences of a large leak in a horizontal steam generator in installations with heavy liquid metal coolant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Erosion and Abrasive Machining · High-Temperature Coating Behaviors · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Chauthwani, G.C. and Kannan, U., Development of computer code IGDC for generation and depletion of fission products and actinides in pressure tube type heavy water reactors (PT-HWRs) using Klopfenstien-Shampine numerical differentiation formula (NDF), Nucl. Eng. Des., 2019, vol. 341, pp. 220–238. https://doi.org/10.1016/j.nucengdes.2018.11.00610.1016/j.nucengdes.2018.11.006 ↗
2. Jeltsov, M. and Kudinov, P., Simulation of a steam bubble transport in the primary system of the pool type lead cooled fast reactors, The 14th International Topical Meeting on Nuclear Reactor Thermal Hydraulics (NURETH-14), Toronto, 2011.
3. Rachkov, V.I., Suslov, I.R., Khomyakov, Yu.S., and Shvetsov, Yu.E., Analysis of the consequences of a large leak in a steam generator in a two-circuit lead-cooled reactor unit, At. Energy, 2021, vol. 130, no. 4, pp. 191–196. https://doi.org/10.1007/s10512-021-00793-w10.1007/s10512-021-00793-w ↗
4. Gang, W., A review of research progress in heat exchanger tube rupture accident of heavy liquid metal cooled reactors, Ann. Nucl. Energy, 2017, vol. 109, pp. 1–8. https://doi.org/10.1016/j.anucene.2017.05.03410.1016/j.anucene.2017.05.034 ↗
5. Gu, Zh., Wang, G., Bai, Yu., Song, Yo., and Zhao, Zh., Preliminary investigation on the primary heat exchanger lower head rupture accident of forced circulation LBE-cooled fast reactor, Ann. Nucl. Energy, 2015, vol. 81, pp. 84–90. https://doi.org/10.1016/j.anucene.2015.03.01810.1016/j.anucene.2015.03.018 ↗
6. Beznosov, A.V., Bokova, T.A., Novozhilova, O.O., Meluzov, A.G., Metrinsky, R.A., and Novinsky, E.G., Experimental studies into the processes accompanying an intercircuit steam generator break in the safe operating limits in HLMC reactor facilities, Nuclear Energy and Technology, 2016, vol. 2, no. 3, pp. 156–160. https://doi.org/10.1016/j.nucet.2016.07.01310.1016/j.nucet.2016.07.013 ↗
7. Alekseev, V.V., Orlova, E.A., Kozlov, F.A., Torbenkova, I.Yu., and Kondrat’ev, A.S., The theoretical and calculation analysis of oxide formation process on steel in lead coolant, Vopr. At. Nauki Tekh., Ser.: Yad. Konstanty, 2010, nos. 1–2, pp. 56–66.
8. Ivanov, K.D., Niyazov, S.-A.S., and Gurbich, A.F., The results of the study of the initial stage of oxidation of austenitic steel 12Cr18Ni10T in water vapor, Voprosy Atomnoi Nauki i Tekhniki. Seriya: Yaderno-Reaktornye Konstanty, 2019, no. 1, pp. 161–169. https://doi.org/10.55176/2414-1038-2019-1-161-16910.55176/2414-1038-2019-1-161-169 ↗