Effect of Diamond Grit Concentration on the Efficiency of Diamond Cutting Wheel Machining
Source abstract
Abstract
Abstract This paper considers the mechanisms of contact interaction of diamond-bearing composite materials (diamond cutting wheel segments) when cutting steel and concrete using scanning electron microscopy. It is established that an increase in the cutting ability of a diamond cutting wheel with an increase in the concentration of diamond grits in the diamond-bearing composite material of the segments is associated not only with an increase in the number of diamond grits on the segment surface, but also with a change in the mechanism of contact interaction of the diamond-bearing composition with the workpiece. It is established that an increase in grit size, even with a small change in concentration (from 17.5 to 25 rel. %) in the segment, changes the cutting ability of the tool. Diamond grits reduce the contribution of frictional interaction of the bond with the workpiece, and their higher concentration in the segment leads to a decrease in impact loads on the grit. When cutting a steel pipe, an increase in the concentration of diamond grits reduces the frictional component of the contact interaction of the diamond-bearing composite material with steel, reducing the thermal effect of frictional interaction, and an increase in their size helps to increase the strength of their fixation by the bond, leveling the influence of the thermal effect of frictional interaction of the bond with steel and the increase in its temperature in the frictional contact zone.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Advanced machining processes and optimization · Advanced Machining and Optimization Techniques · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Konstanty, J., Powder Metallurgy Diamond Tools, The Metal Frontiers Technology Series, Oxford: Elsevier, 2005. https://doi.org/10.1016/B978-1-85617-440-4.X5077-910.1016/B978-1-85617-440-4.X5077-9 ↗
2. Alifanov, A.V. et al., Current state of theory of cutting concrete and reinforced concrete with diamond tools, Aktual’nye problemy prochnosti (Topical Problems of Strength), Minsk: Informatsionno-Vychislitel’nyi Tsentr Ministerstva Finansov Respubliki Belarus, 2022, pp. 380–390.
3. Loladze, N.T., Tserodze, M.P., Dzidzishvili, Yu.G., and Avalishvili, Z.A., Investigation of the relationship between productivity and durability of diamond drills from various factors, Porodorazrushayushchii metalloobrabatyvayushchii instrument – tekhnika, tekhnologiya ego izgotovleniya i primeneniya. XII mezhdunar. konf. (Powder Breaking Metalworking Tools: Technique, Technology of Their Manufacture and Application: 12th International Conference), Kiev: Izdatel’stvo ISM im. V.N. Bakulya NAN Ukrainy, 2011, pp. 537–541.
4. Avalishvili, Z.A., Tserodze, M.P., and Loladze, N.T., Influence of some physical and mechanical properties of the metal bond on the performance of diamond tools, European Research, 2015, no. 10, pp. 46–53.
5. Babich, V.E., Problems of creating specialized and universal diamond abrasive tools, Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov. Sbornik nauchnykh trudov. V 3 knigakh (Modern Methods and Technologies of Creation and Processing of Materials: Collection of Scientific Works: In Three Volumes), vol. 2: Tekhnologii i oborudovanie mekhanicheskoi i fiziko-tekhnicheskoi obrabotki (Mechanical and Physical-Technical Processing Technologies and Equipment), Zalesskii, V.G. et al., Eds., Minsk: Fiziko-Tekhnicheskii Institut Natsional’noi Akademii Nauk Belarusi, 2020, pp. 6–15.
6. Lavrinenko, V.I. and Solod, V.Yu., Instrumenty iz sverkhtverdykh materialov v tekhnologiyakh abrazivnoi i fiziko-tekhnicheskoi obrabotki. Monografiya (Tools from Superhard Materials in Technologies of Abrasive and Physical-Technical Machining: A Monograph), Kamenskoe, Ukraine: Dneprovskii Gosudarstvennyi Tekhnicheskii Universitet, 2016.
7. Wang, C.Y. and Clausen, R., Marble cutting with single point cutting tool and diamond segments, Int. J. Mach. Tools Manuf., 2002, vol. 42, no. 9, pp. 1045–1054. https://doi.org/10.1016/s0890-6955(02)00032-910.1016/s0890-6955(02)00032-9 ↗
8. Denkena, B. and Tönshoff, H.K., Spanen: Grundlagen, VDI-Buch, Berlin: Springer, 2011, 3rd ed. https://doi.org/10.1007/978-3-642-19772-710.1007/978-3-642-19772-7 ↗
9. Ersoy, A., Buyuksagic, S., and Atici, U., Wear characteristics of circular diamond saws in the cutting of different hard abrasive rocks, Wear, 2005, vol. 258, no. 9, pp. 1422–1436. https://doi.org/10.1016/j.wear.2004.09.06010.1016/j.wear.2004.09.060 ↗
10. Denkena, B., Becker, J.C., and Gierse, A., Examination of basic separation mechanisms for machining concrete and stone, Prod. Eng.: Res. Dev., 2004, vol. 11, no. 2, pp. 23–28.