Wear Resistance of Nitrogen-Modified High-Alloy Steels Under Friction Conditions without Lubricant
Source abstract
Abstract
Abstract— For a high-strength coating–base layered material with different values of the thickness of the strengthened layer, finite element modeling of the stress-strain state formed during friction was carried out. It is shown that with a decrease in the thickness of the coating, a significant increase in the level of shear stresses acting in the base during friction is recorded. The patterns of wear under dry friction conditions of AISI 304 and AISI 420 high-chromium steels modified with nitrogen ions, differing in the hardness of the base and the thickness of the nitrided layer, have been studied. It is concluded that the abnormally high wear rate of a thin nitrided layer in AISI 304 steel is associated with the accumulation of shear strains in the plastic austenitic base during friction, as well as with a high gradient of hardness values along the depth of the hardened layer in the steel and a γ → α phase transformation in the base during frictional interaction. The influence of base hardness on the wear resistance of AISI 420 nitrided steel was studied. It has been established that an increase in the hardness of the AISI 420 steel base leads to a decrease in the wear rate of thin nitrided layers at the later stages of tribological tests, which is associated with a slowdown in the accumulation of shear strains in the solid steel base during friction.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (15)
Show source-provided references
1. Alekhin, V.P., Fizika prochnosti i plastichnosti poverkhnostnykh sloev materialov (Physics of Strength and Plasticity of Surface Layers of Materials), Moscow: Nauka, 1983.
2. Buckley, D.H., Surface Effects in Adhesion, Friction, Wear, and Lubrication, Tribology Series, vol. 5, Amsterdam: Elsevier, 1981.
3. Marchenko, E.A., O prirode razrusheniya metallov pri trenii (On the Nature of Friction Destruction of Metals), Moscow: Nauka, 1979.
4. Suslov, A.G., Inzheneriya poverkhnosti detalei (Machine Element Surface Engineering), Moscow: Mashinostroenie, 2008.
5. Vityaz’, P.A. and Zhornik, V.I., Methods of surface engineering and nanotechnologies for improved resource of wear surfaces, Vestsi Natsyyanal’nai Akademii Navuk Belarusi. Seryya Fizika-Tekhnichnykh Navuk, 2017, no. 3, pp. 30–46.
6. Makhutov, N.A., Konstruktsionnaya prochnost’, resurs i tekhnogennaya bezopasnost’: V 2 ch. (Structural Strength, Resource and Technogenic Safety: In Two Parts), Novosibirsk: Nauka, 2005.
7. Budilov, V.V., Mukhin, V.S., and Shekhtman, S.R., Nanotekhnologii obrabotki poverkhnosti detalei na osnove vakuumnykh ionnoplazmennykh metodov. Fizicheskie osnovy i tekhnicheskie resheniya (Nanotechnology for Surface Treatment of Parts Based on Vacuum Ion Plasma Methods: Physical Basis and Technical Solutions), Moscow: Nauka, 2008.
8. Kukareko, V.A., Mozharovskii, V.V., Kushnerov, A.V., and Mar’in, S.A., Regularities of wear of austenitic steel AISI 321 strengthened by nitrogen ions, Problemy Fiziki, Matematiki i Tekhniki, 2020, no. 4, pp. 37–43.
9. Markov, D.P., Markov, D.P., and Kelly, D., Adhesion-initiated types of catastrophic wear, J. Frict. Wear, 2002, vol. 23, no. 5, pp. 483–493.
10. Johnson, K.L., Contact Mechanics, Cambridge University Press, 1987.
11. Mozharovskii, V.V. and Rogacheva, N.A., Investigation of stress state of fiber composite material with homogeneous coating at contact with cylindrical indenter, Mater., Tekhnol., Instrum., 2000, vol. 5, no. 2, pp. 5–10.
12. Mozharovskii, V.V., Kukareko, V.A., Mar’in, S.A., and Kushnerov, A.V., Numerical calculation and analysis of the stress state in a layered body during friction, taken into account the changes in the elastic modules of the coating and base, Problemy Fiziki, Matematiki i Tekhniki, 2024, no. 1, pp. 22–28. https://doi.org/10.54341/20778708_2024_1_58_2210.54341/20778708_2024_1_58_22 ↗
13. Belyi, A.V., High-intensity low-energy nitrogen ion implantation, Fiz. Mezomekh., 2002, vol. 5, no. 1, p. 95.
14. Kushnerov, A.V., Kukareko, V.A., and Belyi, A.V., Regularities of adhesive wear of nitrogen ion hardened austenitic chromium steel, Sovremennye metody i tekhnologii sozdaniya i obrabotki materialov: sb. nauchnykh trudov (Modern Methods and Technologies of Creation and Processing of Materials: Collection of Scientific Works), vol. 1: Materialovedenie (Materials Science), Zalesskii, V.G. et al., Eds., Fiziko-Tekhnicheskii Institut Natsional’noi Akademii Nauk Belarusi, 2022, vol. 1, pp. 153–162.
15. Bokshtein, B.S. and Yaroslavtsev, A.B., Diffuziya atomov i ionov v tverdykh telakh (Diffusion of Atoms and Ions in Solids), Moscow: Moskovskii Institut Stali i Splavov, 2005.