journal article·2024-12

Evaluation of the Wear Resistance of a Radial Bearing with a Non-Standard Bearing Surface, Taking into Account the Compressibility and Viscosity of the Lubricant

E. A. Bolgova, G. A. Badakhov, M. A. Mukutadze, V. E. Shvedova

Journal of Friction and Wear· Volume 45· Issue 6
Publisher page

Abstract

Abstract The research includes the development and analysis of a mathematical model of a truly viscous lubricant in a modified sliding bearing design with a composite fluoroplastic coating on the surface of the shaft and a groove, which helps to improve the distribution of lubricant and increase the durability of the system. Based on the equation of motion, the liquid lubricant under study, the continuity equation, and the equation of state, new mathematical models have been obtained that additionally take into account a parameter such as compressibility. The novelty of the work lies in the development of a methodology for engineering calculations of the design of a radial sliding bearing with a polymer coating, taking into account the presence of a groove, as well as the dependence of viscosity on pressure and compressibility of the lubricant, allowing one to determine the value of the main tribotechnical parameters. The results of the study provided a reduction in errors in bearing capacity by 11–13%, and in coefficient of friction by 9–12% of the modified bearing in comparison with traditional designs. As a result, it was possible to achieve an increase in the service life of radial bearings, which is of great importance for their industrial application.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Engineering Technology and Methodologies · Advanced Theoretical and Applied Studies in Material Sciences and Geometry

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Pavlycheva, E.A., Development of polymer composition for obtaining a protective coating on metal surfaces, Mezhdunarodnyi Zhurnal Prikladnykh I Fundamental’nykh Issledovanii, 2022, no. 2, pp. 33–36. https://doi.org/10.17513/mjpfi.1335510.17513/mjpfi.13355 ↗
2. Grakovich, P.N., Shelestova, V.A., Shumskaja, V.Ju., Shylko, I.S., Gucev, D.M., Bashlakova, A.L., and Celuev, M.Ju., Influence of the type of carbon fiber filler on the physical–mechanical and tribological properties of PTFE composites, J. Frict. Wear, 2019, vol. 40, no. 1, pp. 11–16. https://doi.org/10.3103/s106836661901006910.3103/s1068366619010069 ↗
3. Titov, N.V., Kuznetsov, I.S., Logachev, V.N., Prudnikov, M.I., and Kovaleva, I.N., Efficiency of antifriction solid lubricant coatings for metal–polymer friction pairs, J. Frict. Wear, 2024, vol. 45, no. 2, pp. 72–76. https://doi.org/10.3103/s106836662470011910.3103/s1068366624700119 ↗
4. Robertson, B.P. and Calabrese, M.A., Evaporation-controlled dripping-onto-substrate (DoS) extensional rheology of viscoelastic polymer solutions, Sci. Rep., 2022, vol. 12, no. 1, p. 4697. https://doi.org/10.1038/s41598-022-08448-x10.1038/s41598-022-08448-x ↗
5. Saha, S. and Adachi, Ya., Shielding behavior of electrokinetic properties of polystyrene latex particle by the adsorption of neutral poly(ethylene oxide), J. Colloid Interface Sci., 2022, vol. 626, pp. 930–938. https://doi.org/10.1016/j.jcis.2022.06.15410.1016/j.jcis.2022.06.154 ↗
6. Egghe, T., Ghobeira, R., Morent, R., Hoogenboom, R., and De Geyter, N., Comparative study of the aging behavior of plasma activated hexamethyldisiloxane-based plasma polymers and silicone elastomer thin films, Prog. Org. Coat., 2022, vol. 172, p. 107091. https://doi.org/10.1016/j.porgcoat.2022.10709110.1016/j.porgcoat.2022.107091 ↗
7. Chernets, M., Shil’ko, S., Kornienko, A., and Pashechko, M., Triboanalysis of antifrictional materials based on polyamides for metal-polymer sliding bearings, J. Frict. Wear, 2023, vol. 44, no. 2, pp. 63–70. https://doi.org/10.3103/s106836662302003410.3103/s1068366623020034 ↗
8. Nithin, S., Rajagopal, K., and Veeraragavan, A., State-of-the art summary of geosynthetic interlayer systems for retarding the reflective cracking, Indian Geotech. J., 2015, vol. 45, no. 4, pp. 472–487. https://doi.org/10.1007/s40098-015-0161-710.1007/s40098-015-0161-7 ↗
9. Zhang, F. and Wei, X., Study of ionic/nonionic polyurethane dispersions with high solid content and low viscosity using a complex hydrophilic chain-extending agent, J. Coat. Technol. Res., 2018, vol. 15, no. 1, pp. 141–148. https://doi.org/10.1007/s11998-017-9965-y10.1007/s11998-017-9965-y ↗
10. Thirumurugan, V. and Rameshkumar, M., Design of an instrument to determine the acoustic characteristics of non wovens made from recycled polyester, jute and flax, Fibers Polym., 2020, vol. 21, no. 12, pp. 3009–3015. https://doi.org/10.1007/s12221-020-0096-110.1007/s12221-020-0096-1 ↗
11. Mestry, S.U., Khuntia, S.P., and Mhaske, S.T., Correction to: Development of waterborne polyurethane dispersions (WPUDs) from novel cardanol-based reactive dispersing agent, Polym. Bull., 2021, vol. 78, no. 12, pp. 6835–6835. https://doi.org/10.1007/s00289-020-03504-w10.1007/s00289-020-03504-w ↗
12. Lysova, M.A., Gruzintseva, N.A., and Gusev, B.N., Establishment of quality indicators for nonwoven geosynthetic fabrics according to their operational functions, Russ. J. Gen. Chem., 2021, vol. 91, no. 6, pp. 1213–1217. https://doi.org/10.1134/s107036322106035910.1134/s1070363221060359 ↗
13. Nega, B.F., Pierce, R.S., Yi, X., and Liu, X., Characterization of mechanical and damping properties of carbon/jute fibre hybrid SMC composites, Appl. Compos. Mater., 2022, vol. 29, no. 4, pp. 1637–1651. https://doi.org/10.1007/s10443-022-10034-310.1007/s10443-022-10034-3 ↗
14. Kirishchieva, V.I. and Mukutadze, M.A., Increasing the wear resistance of radial bearings with non-circular profile and composite fluoroplastic polymer coating, Transportnoe Mashinostroenie, 2022, vol. 2022, no. 11, pp. 10–17. https://doi.org/10.30987/2782-5957-2022-11-10-1710.30987/2782-5957-2022-11-10-17 ↗
15. Khasyanova, D.U., Mukutadze, M.A., Mukutadze, A.M., and Zadorozhnaya, N.S., Mathematical model for a lubricant in a sliding bearing with a fusible coating in terms of viscosity depending on pressure under an incomplete filling of the working gap, J. Mach. Manuf. Reliab., 2021, vol. 50, no. 5, pp. 405–411. https://doi.org/10.3103/s105261882105008310.3103/s1052618821050083 ↗