Asymptotic Solution of the Contact Problem on the Stationary Rolling of a Rigid Cylinder with a Viscoelastic Surface Layer
Source abstract
Abstract
Abstract An analytical method of calculating contact parameters during rolling of a cylindrical body, having a thin viscoelastic surface layer, over a rigid sideway was developed. The technique is based on elastic-viscoelastic analogy and asymptotic approximation of the exact solution of the elasticity theory problem for a thin strip. The mode of steady rolling at given normal force and speed of motion of the center of the rolling body is considered. In the example of calculation the initial parameters corresponded to rolling support of a mine skip with rolling elements in form of steel rollers with a polyurethane rim. The dependences of rolling resistance force (which is parallel to the supporting surface) on speed, friction coefficient during sliding, and Poisson’s ratio of the rim material were obtained. The dependence of rolling resistance force on speed has a maximum, which corresponds to a speed of 8 m/s in the example considered. The rolling resistance decreases as Poisson’s ratio of the rim material increases. The calculated values are compared with assessments of contact parameters obtained within the framework of a simplified Winkler’s base model. It is shown that the discrepancy of results does not exceed 5%. The developed technique can be used for designing and predicting the durability of metal-polymer rolling bearings.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Contact Mechanics and Variational Inequalities · Adhesion, Friction, and Surface Interactions · Mechanical stress and fatigue analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Uchiyama, Yo., Polymeric elastomers: Tribological behavior and engineering components, Encyclopedia of Tribology, Wang, J. and Chung, Y.-W., Eds., Boston: Springer, 2013, pp. 2638–2644. https://doi.org/10.1007/978-0-387-92897-5_82110.1007/978-0-387-92897-5_821 ↗
2. Prushak, V.Y., Shcherba, V.Ya., and Morev, D.A., Mine skip, RB Patent 11460, 2017.
3. Chernous, D.A. and Kodnyanko, E.V., Asymptotic approach to solving the contact problem for a rolling body with a thin deformable rim, Mekhanika Mashin, Mekhanizmov i Materialov, 2023, no. 1, pp. 79–87.10.46864/1995-0470-2023-1-62-79-87 ↗
4. Winkler, E., Die Lehre von der Elastizität und Festigkeit, Prag: Verlag von H. Dominicus, 1867.
5. Kravchuk, A.S. and Kravchuk, A.I., Prikladnye kontaktnye zadachi dlya obobshchennoi sterzhnevoi modeli pokrytiya (Applied Contact Problems for Generalized Rod Coating Model), St. Petersburg: Naukoemkie Tekhnologii, 2019.
6. Jaffar, M.J., Asymptotic behaviour of thin elastic layers bonded and unbonded to a rigid foundation, Int. J. Mech. Sci., 1989, vol. 31, no. 3, pp. 229–235. https://doi.org/10.1016/0020-7403(89)90113-610.1016/0020-7403(89)90113-6 ↗
7. Kadnianka, E.V., Shil’ko, S.V., and Chernous, D.A., A solution for the contact problem of free rolling on a rigid foundation of a cylindrical body with a deformable rim, J. Frict. Wear, 2024, vol. 45, no. 1, pp. 1–8. https://doi.org/10.3103/s106836662470001610.3103/s1068366624700016 ↗
8. Vil’ke, U.G. and Sinitsyn, V.A., Steady-state motion of a wheel with a viscoelastic periphery, Mech. Solids (Engl. Transl.), 1997, vol. 32, no. 3, pp. 39–46.
9. Popov, V.L., Mekhanika kontaktnogo vzaimodeistviya i fizika treniya (Contact Mechanics and Friction: Physical Principles and Applications), Moscow: Fizmatlit, 2012; Berlin: Springer, 2010. https://doi.org/10.1007/978-3-642-10803-710.1007/978-3-642-10803-7 ↗
10. Christensen, R.M., Theory of Viscoelasticity: An Introduction, New York: Elsevier, 1982, 2nd ed. https://doi.org/10.1016/B978-0-12-174252-2.X5001-710.1016/B978-0-12-174252-2.X5001-7 ↗
11. Ferry, J.D., Viscoelastic Properties of Polymers, New York: Wiley, 1980, 3rd ed.