journal article·2024-08

The Wear Features and Destruction Mechanisms of the Working Stages of a High-Speed Pump

I. S. Splavskiy

Journal of Friction and Wear· Volume 45· Issue 4
Publisher page

Abstract

Abstract— The results of research on the modernized SKI LX bench, which provides addition to the model fluid of various kinds of abrasive particles, the nature and properties of which can correspond to real operating conditions, are presented. In developing the program and methodology of these studies, we used the after exploitation analysis of high-speed pumping units carried out at the fields of various companies in the Russian Federation. The features of wear and the mechanisms of destruction of the working stages of the 92ELNC85-2250-e2OE-10ETS high-speed pump series were investigated. On a real design of a high-speed pump the possibility to determine the wear rate of tribo-contraction elements by the method of its weight determination with a forecast for the resource and to reveal the ways of its increase in a wide range of the number of suspended abrasive particles in the model fluid, and in particular, in water is shown. The results in this work are the basis for the development of scientifically based methods for studying the wear resistance of bearing assemblies of high-speed centrifugal pumps in conditions of a wide variety of reservoir fluids and suspended particles contained in them.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Surface Treatment and Coatings · Polymer Science and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Drozdov, A.N., Lyapkov, P.D., and Igrevskii, V.I., Dependence of the degree of influence of the gas phase on the operation of a submersible centrifugal pump on the liquid frothiness, Neftepromysl. Delo, 1982, no. 10, pp. 16–18.
2. Drozdov, A.N. and Igrevskii, V.I., Bench tests of 1MNG5 and MNGSL5 separators for submersible centrifugal pumps, Neft. Khoz., 1994, no. 8, pp. 44–48.
3. Murakami, M., Suehiro, N., Jsaji, T., and Kajita, J., Flow of entrained air in centrifugal pumps, 13th Congress of the International Assocication for Hydraulic Research, Kyoto, 1969, vol. 2, pp. 71–79.
4. Angus, R.W., What air leakege does to a centrifugal pump, Power, 1928, no. 4, pp. 149–151.
5. Gangrade, A.K., Phalle, V.M., Mantha, S.S., and Siddiquee, A.N., Influence of eccentricity ratio on stability performance of hydrodynamic conical journal bearing, J. Phys.: Conf. Ser., 2019, vol. 1240, no. 1, p. 012115. https://doi.org/10.1088/1742-6596/1240/1/01211510.1088/1742-6596/1240/1/012115 ↗
6. Xu, J., Zhang, C., Wang, J., and Wang, W., Experimental investigations of novel compound bearing of superconducting magnetic field and hydrodynamic fluid field, IEEE Trans. Appl. Supercond., 2020, vol. 30, no. 1, p. 8794543. https://doi.org/10.1109/tasc.2019.293444310.1109/tasc.2019.2934443 ↗
7. Majorov, S., On finite element model for hydrodynamic journal bearing with micropolar lubrication, Proccedings of International Scientific Conference BALTTRIB 2019, Kaunas, Lithuania: Vytautas Magnus University, 2019, vol. 1, pp. 202–208. https://doi.org/10.15544/balttrib.2019.3210.15544/balttrib.2019.32 ↗
8. Cheremisinov, E.M. and Splavskiy, I.S., Testing procedure for the tribological properties of axial bearings, J. Mach. Manuf. Reliab., 2023, vol. 52, no. 3, pp. 281–285. https://doi.org/10.3103/s105261882302002410.3103/s1052618823020024 ↗
9. Splavskiy, I.S., Development and optimization of high-speed loaded axial supports with floating sectors of submersible vane pumps, J. Mach. Manuf. Reliab., 2023, vol. 52, no. 8, pp. 858–864. https://doi.org/10.1134/s105261882308016210.1134/s1052618823080162 ↗
10. Gorlov, A.E. and Den’gaev, A.V., Express methodology for selection of high-speed pumping units layouts for pumping gas-liquid mixtures, Inzhener-Neftyanik, 2020, no. 4, pp. 55–62.
11. Smirnov, N.I. and Grigoryan, E.E., Study of the impact of wear of movable interfaces on failures of an immersible electrically operated vane pump for oil extraction, J. Mach. Manuf. Reliab., 2019, vol. 48, no. 1, pp. 79–83. https://doi.org/10.3103/s105261881901014x10.3103/s105261881901014x ↗