journal article·2024-08

Effect of Surface Modification on Tribological Properties of VT22 and Ti-5553 Titanium Alloys

M. S. Aseeva, E. V. Torskaya, G. T. Zainetdinova, A. V. Morozov, P. O. Bukovsky

Journal of Friction and Wear· Volume 45· Issue 4
Publisher page

Abstract

Abstract— Tribological properties of VT22 and Ti-5553 titanium alloys are improved due to the chemical-thermal treatment of their surfaces and the application of a wear-resistant titanium nitride coating. The tribological properties were compared for samples without additional surface treatment, with surface modification by nitriding, with the titanium nitride coating, as well as with a two-stage treatment of sample surfaces, including primary nitriding of the surface followed by the application of a titanium nitride coating on it. It was found that low wear resistance is observed in titanium samples without coatings, while the wear resistance of samples with a nitrided surface layer increases for both types of tested alloys. Minimal wear occurs for the samples with two-stage formation of a titanium nitride coating while on samples without an intermediate nitrided sublayer, when tested with a ceramic ball, delamination of the coating is observed; the formation of the sublayer prevents this type of destruction.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Material Properties and Applications · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Zolotov, I.V., Improvement of wear resistance of two-phase titanium alloys surface by nitriding in glow discharge with a hollow cathode, Cand. Sci. (Eng.) Dissertation, Ufa, 2017.
2. Drobov, A.N., Bosyakov, M.N., and Pobol, I.L., The effect of ion-plasma nitriding on the enduring quality and the nature of changes in the surface roughness of titanium alloys VT1-0, VT6 and OT4-1, Lit’e i Metallurgiya, 2022, no. 2, pp. 78–83. https://doi.org/10.21122/1683-6065-2022-2-78-8310.21122/1683-6065-2022-2-78-83 ↗
3. Tambovskii, I.V., Increase of hardness and wear resistance of structural alloys by multicomponent electrolyte-plasma saturation with boron, nitrogen and carbon, Cand. Sci. (Eng.) Dissertation, Rybinsk, Yaroslavl oblast, 2018.
4. Li, Yo., Wang, X., Yang, Sh., Hou, L., Wei, Yi., Zhang, Zh., and Yang, X., Investigation on wear behavior of cryogenically treated Ti–6Al–4V titanium alloy under dry and wet conditions, Materials, 2019, vol. 12, no. 18, p. 2850. https://doi.org/10.3390/ma1218285010.3390/ma12182850 ↗
5. Kusmanov, S.A., Tambovskiy, I.V., Korableva, S.S., Mukhacheva, T.L., Dyakonova, A.D., Nikiforov, R.V., and Naumov, A.R., Increasing wear resistance of Ti6Al4V alloy by cathodic plasma electrolytic nitriding, Elektron. Obrab. Mater., 2022, vol. 58, no. 1, pp. 9–14. https://doi.org/10.52577/eom.2022.58.1.0910.52577/eom.2022.58.1.09 ↗
6. Kusmanov, S.A., Tambovskii, I.V., Kusmanova, I.A., and Belkin, P.N., Increasing wear resistance of alpha- and beta-titanium alloy by anodic plasma electrolytic boriding, Elektron. Obrab. Mater., 2021, no. 57, pp. 1–6. https://doi.org/10.5281/zenodo.445662410.5281/zenodo.4456624 ↗
7. Narygina, I.V., Karabanalov, M.S., Illarionov, A.G., and Radaev, P.S., Structural and phase transformation in a cold-worked titanium alloy VT22 during aging, Ural’skaya shkola molodykh metallovedov: XIX Mezhdunarodnaya nauchno-tekhnicheskaya Ural’skaya shkola-seminar metallovedov—molodykh uchenykh, 19–21 noyabrya 2018 (Ural School of Young Metallurgists: 19th International Scientific and Technical Ural School-Seminar of Metallurgists—Young Scientists, November 19–21, 2018), Yekaterinburg, 2018, pp. 156–160. http://elar.urfu.ru/handle/10995/74589.
8. Borisyuk, Yu.V., Oreshnikova, N.M., Berdnikova, M.A., Tumarkin, A.V., Khodachenko, G.V., and Pisarev, A.A., Plasma nitriding of titanium alloy Ti5Al4V2Mo, Phys. Procedia, 2015, vol. 71, pp. 105–109. https://doi.org/10.1016/j.phpro.2015.08.32210.1016/j.phpro.2015.08.322 ↗
9. Lavrys, S.M. and Pohrelyuk, I.N., Intensification of the nitriding of VT22 two-phase titanium alloy for increase its wear resistance, Naukovi Notatki, 2019, vol. 66, pp. 187–194.
10. Belkin, V.S., Research of the tribological properties of two-phase titanium alloys, after electrolyte-plasma saturation with nitrogen, Gagarinskie chteniya 2017 (Gagarin Readings 2017), Moscow, 2017, Moscow: Moskovskii Aviatsionnyi Institut, 2017, p. 219.
11. Il’in, A.A., Betsofen, S.Ya., Skvortsova, S.V., Petrov, L.M., and Bannykh, I.O., Structural aspects of ion nitriding of titanium alloys, Russ. Metall. (Engl. Transl.), 2002, no. 3, pp. 209–217.
12. Skvortsova, S.V., Zainetdinova, G.T., Gurtovaya, G.V., and Tevs, M.D., Effect of alloying elements on the hardness of experimental pseudo-β titanium alloys, Russ. Metall. (Engl. Transl.), 2023, vol. 2023, no. 4, pp. 453–459. https://doi.org/10.1134/s003602952304023710.1134/s0036029523040237 ↗
13. Skvortsova, S.V., Zainetdinova, G.T., Gurtovaya, G.V., Fedorova, L.V., and Chupikova, A.R., Effect of isothermal treatment on the structure and hardness of pseudo-β titanium alloys, Russ. Metall. (Engl. Transl.), 2023, vol. 2023, no. 12, pp. 1844–1852. https://doi.org/10.1134/s003602952312034010.1134/s0036029523120340 ↗
14. ASTM G99-05 Standard Test Method for Wear Testing with a Pin-on-Disk Apparatus, American Society for Testing and Materials, 2004.
15. Torskaya, E.V., Lushnikov, N.A., and Lushnikov, P.A., Analysis of the stress-strain condition of a multilayer road surface, J. Frict. Wear, 2002, vol. 29, no. 2, pp. 156–161. https://doi.org/10.3103/s106836660802014110.3103/s1068366608020141 ↗