Increasing the Efficiency of Finishing of Quartz Crystal Elements through Controlling the Structural, Mechanical, and Rheological Characteristics of Abrasive Suspensions
Source abstract
Abstract
Abstract One option for solving the scientific and applied problem of increasing the efficiency of finishing quartz crystal elements (QCEs) through controlling the structural, mechanical, and rheological characteristics of abrasive suspensions is presented. The finishing technology for manufacturing QCEs is flat finishing on machines using an abrasive suspension of fine Al2O3 particles. The dispersion medium in the abrasive suspension during finishing of QCEs ensures uniform distribution of abrasive grains over the lap, minimizes the sticking of separating quartz particles, and facilitates its dispersion. Control of the structural and mechanical characteristics of the abrasive suspension is achieved by introducing into the dispersion medium (water) stabilizers such as protective colloids, which prevent the approach of abrasive particles and the destruction of quartz. The problem of QCE finishing has been solved by the authors for the first time ever.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering Technology and Methodologies · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (9)
Show source-provided references
1. Filimonov, O., On the spectrum of high-frequency quartz resonators, Komponenty Tekhnol., 2019, no. 7, pp. 100–102. https://www.elibrary.ru/mndybi.
2. Kolomoets, S.S., Quartz LC-cut resonators, Radiotekhnika, elektronika i svyaz. Tezisy dokladov VII Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii (Radioengineering, Electronics, and Communication: Proc. 7th Int. Sci. and Tech. Conf.), Omsk, 2023, pp. 219–220.
3. Filimonov, O., Design features of quartz resonators with improved spectral characteristics, Komponenty Tekhnol., 2018, no. 5, pp. 110–112. https://www.elibrary.ru/ylgidb.
4. Sutowska, M. and Sutowski, P., Contemporary applications of magnetoreological fluids for finishing process, J. Mech. Energy Eng., 2017, vol. 1, no. 2, pp. 141–152.
5. Khudolei, A.L., Kolpashchikov, V.L., and Gorodkin, G.R., Peculiarities of magnetorheological processing of optical products made of high-purity substances, Vysokochistye veshchestva i materialy poluchenie, analiz, primenenie. Sbornik tezisov XVI Vserossiiskoi konferentsii i IX Shkoly molodykh uchenykh, posvyashchennye 100-letiyu akademika G.G. Devyatykh (Highly Pure Substances and Materials Preparation, Analysis, Application: Proc. 16th All-Russian Conf. and 9th School of Young Scientists Dedicated to the 100th Anniversary of Academician G.G. Devyatykh), Churbanova, M.F., Ed., 2018, p. 176. https://www.elibrary.ru/xzvoyp.
6. Kragel’skii, I.V., Trenie i iznos (Friction and Wear), Moscow: Mashinostroenie, 1968.
7. Mulhearn, T.O. and Samuels, L.E., The abrasion of metals: A model of the process, Wear, 1962, vol. 5, no. 6, pp. 478–498. https://doi.org/10.1016/0043-1648(62)90064-910.1016/0043-1648(62)90064-9 ↗
8. Tsesnek, L.S., Mechanics and microphysics of optical surface formation, Optiko-Mekhanicheskaya Prom-st., 1970, no. 8, pp. 60–69.
9. Shumyacher, V.M., Fiziko-khimicheskie protsessy pri finishnoi abrazivnoi obrabotke. Monografiya (Physical and Chemical Processes in Finishing Abrasive Machining: Monograph), Volgograd: VolgGASU, 2004.