Tribological Characteristics of a Friction Composition of Metal-Ceramic Powders and Carbon-Containing Additives on a Polymer Binder
Source abstract
Abstract
Abstract Research is carried out on the wear resistance and friction coefficients of a friction composition made from PC30, Al2O3, SiO2, TiO2, and Cr2O powders and an additive containing carbon fiber in combination with GE-1 graphite, using the SFP-012A phenolic powder binder material. The study of tribotechnical properties is carried out on an IM-58 inertial stand. Using a stereoscopic microscope and a scanning electron microscope with a micro-X-ray spectral attachment, the morphology of the friction surfaces of experimental samples is analyzed, and information about the elements forming the friction surface is obtained. It is established that promising additives for the friction composition are 5–6% coarse Al2O3 and SiO2 powders. They promote an increase in friction of the friction material to the recommended minimum value of 0.3. Promising additives also include carbon fiber in an amount of 25–50%, which makes it possible to maintain the wear rate of the composition at a level not exceeding 30 µm/km. By increasing the carbon fiber content to 50%, a minimum value of the friction coefficient was obtained at the initial moment of contact of the tribocoupling surfaces. In this case, the experimental curve of changes in the friction coefficient is characterized by a smooth transition to the slipping region.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Surface Treatment and Coatings · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Fedorchenko, I.M., Kryachek, V.M., and Panaioti, I.I., Sovremennye friktsionnye materialy (Modern Friction Materials), Kiev: Naukova Dumka, 1975.
2. Al’gin, V.B. and Poddubko, S.N., Resursnaya mekhanika transmissii mobil’nykh mashin (Lifetime Mechanics of Mobile Machinery Transmission), Minsk: Belorusskaya Navuka, 2019.
3. Sharipov, V.M., Proektirovanie mekhanicheskikh, gidromekhanicheskikh i gidroob”emnykh peredach traktorov (Design of Mechanical, Hydromechanical and Hydrostatic Transmissions of Tractors), Moscow: Mosk. Gos. Tekh. Univ. MAMI, 2002. https:// www.elibrary.ru/qbiaut.
4. Sergienko, V.P. and Bukharov, S.N., Vibratsii i shum v nestatsionarnykh protsessakh treniya (Vibrations and Noise in Unsteady Friction Processes), Minsk: Belaruskaya Navuka, 2012.
5. Barkanov, E., Mihovski, M., and Sergienko, V., Innovative Solution in Repair of Gas and Oil Pipelines, Sofia: Bulgarian Society for Non-Destructive Testing Publishers, 2016.
6. Leshok, A.V., Rogovoi, A.N., Krivolapov, P.N., and Lazarchik, M.V., Investigation of the influence of TiO2 and Cr2O3 powders additives on mechanical properties of dry friction friction material polymer binder-iron powder, Poroshkovaya Metall., 2022, no. 45, pp. 68–73.
7. Kropotin, O.V., Surikov, V.I., and Kalistratova, L.F., Effect of reinforcing carbon fiber on structure and viscoelastic properties of polytetrafluoroethylene, Vestn. Omskogo Univ., 1997, no. 3, pp. 33–34. https:// www.elibrary.ru/vyepyl.
8. Il’yushchenko, A.F., Leshok, A.V., and D’yachkova, L.N., Spechennye friktsionnye materialy na osnove medi dlya raboty v usloviyakh granichnogo treniya (Sintered Copper-Based Friction Materials for Boundary Friction Conditions), Minsk: Medisont, 2021.
9. Grebnev, V.P., Traktory i avtomobili. Teoriya i ekspluatatsionnye svoistva (Tractors and Automobiles: Theory and Operational Properties), Moscow: Knorus, 2011.
10. Sharipov, V.M., Proektirovanie mekhanicheskikh, gidromekhanicheskikh i gidroob”emnykh peredach traktorov (Design of Mechanical, Hydromechanical and Hydrostatic Transmissions of Tractors), Moscow: Mosk. Gos. Tekh. Univ. MAMI, 2022.