Stand for Studying Soil Friction
Source abstract
Abstract
Abstract— To study the wear and friction force of a solid surface during friction with the ground, a carousel-type laboratory stand was created. The main task was to measure friction forces under various parameters of model soil and speeds of relative movement close to real ones during field agricultural work. Traditional electronic dynamometers are designed for static or slowly varying loads. Laboratory stands with such sensors have a linear design, a limited friction path (up to 2 m), and very low relative movement speeds (up to 0.15 m/s). The short friction path complicates the running-in process at the beginning of the experiment. Integral friction forces depend on speed. The adhesion component depends entirely on the presence of soil water at the interface and, thus, on the time required for water to move to the friction surface. With a carousel design of the stand, the friction path is infinite, and the speed can be increased by an order of magnitude (up to 1.5 m/s). Since studies usually compare the influence of different materials or soil compositions on the results of experiments, the systematic error due to the difference in the friction path from a straight line is insignificant. To measure rapidly changing loads, a force measuring station was developed based on a flat spring and a small displacement mechatronic sensor. The advantage of mechatronic linear displacement sensors is high sensitivity, ease of switching on, and high reliability. Disadvantages include dependence on temperature conditions and consequently the need for calibration in each experiment.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Soil Mechanics and Vehicle Dynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (8)
Show source-provided references
1. Khan, M.A., Qaisrani, R., and Jian-Qiao, L.I., The techniques of reducing adhesion and scouring soil by bionic—Review of literature, Adv. Nat. Sci., 2010, vol. 3, no. 2, pp. 41–50.
2. Kobets, A.S., Derkach, A.D., Kabat, O.S., Makarenko, D.A., Aulin, V.V., Muranov, E.S., Shapoval, A.N., Kobets’, A.S., Derkach, O.D., Makarenko, D.O., et al., Identification of TEKRONE material and justification of analogs for the manufacture of moldboards for ploughs, Agricultural Machinery 2019: Proc. 7th Int. Sci. Congress, Burgas, Bulgaria, 2019, Burgas, Bulgria: Rousse Univ., 2019, vol. 1, pp. 35–38.
3. Yakimtsov, V.P., Brazovskii, I.I., Sal’nikova, I.A., and Stanchik, A.I., The effect of gamma radiation on the tribological behavior of polyethylene terephthalate-based antifrictional material, J. Frict. Wear, 2008, vol. 29, no. 2, pp. 137–139. https://doi.org/10.3103/s106836660802010410.3103/s1068366608020104 ↗
4. Birch, R.A., Ekwue, E.I., and Phillip, C.J., Soil-metal sliding resistance forces of some Trinidadian soils at high water contents, West Indian J. Eng., 2016, vol. 38, no. 2, pp. 52–58.
5. Abbaspour-Gilandeh, Yo., Hasankhani-Ghavam, F., Shahgoli, G., Shrabian, V.R., and Abbaspour-Gilandeh, M., Investigation of the effect of soil moisture content, contact surface material and soil texture on soil friction and soil adhesion coefficients, Acta Technol. Agric., 2018, vol. 21, no. 2, pp. 44–50. https://doi.org/10.2478/ata-2018-000910.2478/ata-2018-0009 ↗
6. Berlin, G.S., Mekhanotrony (Mechanotrons), Moscow: Radio i Svyaz’, 1984.
7. Vilde, A. and Tanas, W., Determination of the soil friction coefficient and specific adhesion, TEKA Komisji Motoryzacji Energetyki Rolnictwa, 2005, vol. 5, pp. 212–216.
8. Harsono, S.S., Tillage implement effects on wet sticky soil, Res. J. Agric. Sci., 2011, vol. 43, no. 4, pp. 86–94.