journal article·2024-02

Molecular Mechanisms of Polyoxymethylene Wear

A. O. Pozdnyakov, Li Syanshun, E. B. Sedakova

Journal of Friction and Wear· Volume 45· Issue 1
Publisher page

Abstract

Abstract Friction and wear of polyoxymethylene upon friction against polyoxymethylene and polyetheretherketone have been analyzed. It is shown that wear exponentially increases upon growth of contact pressure and sliding velocity in the homogeneous friction pair polyoxymethylene–polyoxymethylene. In the heterogeneous pair polyetheretherketone–polyoxymethylene the wear of POM is small and exhibits no registered dependence on sliding velocity and contact pressure. Mass-spectrometric analysis shows that the macromolecular decomposition products are not detected for polyetheretherketone–polyoxymethylene pair. However, for thermodynamically compatible polyoxymethylene–polyoxymethylene pair their formation, accompanied by the growth of friction force, is detected already at the levels of friction power as low as 10–2 MPa m/s. These differences have been interpreted to result from interpenetration of polyoxymethylene macromolecules across the interface and their rupture in the shear field in homogeneous polyoxymethylene–polyoxymethylene friction pair and its absence in polyetheretherketone–polyoxymethylene pair. Thermally activated interpenetration of macromolecules for polyoxymethylene–polyoxymethylene pair and its absence in polyetheretherketone–polyoxymethylene pair has been visualized by means of molecular dynamics simulations. The experimental approach and the results of its application will be useful in detailed studies of molecular level friction mechanisms of friction and wear of industrially used polymers and their composites.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Polymer Nanocomposites and Properties · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Myshkin, N.K. and Petrokovec, M.I., Trenie, smazka i iznos. Fizicheskie osnovi i technicheskie prilozheniya tribologii (Friction, Lubrication and Wear: Physical Basis and Technical Applications of Tribology), Moscow: Fizmatlib, 2007.
2. Jia, B.-B., Liu, X.-J., Cong, P.-H., and Li, T.-Sh., An investigation on the relationships between cohesive energy density and tribological properties for polymer–polymer sliding combinations, Wear, 2008, vol. 264, nos. 7–8, pp. 685–692. https://doi.org/10.1016/j.wear.2007.06.00410.1016/j.wear.2007.06.004 ↗
3. Laux, K.A. and Schwartz, C.J., Effects of contact pressure, molecular weight, and supplier on the wear behavior and transfer film of polyetheretherketone (PEEK), Wear, 2013, vol. 297, nos. 1–2, pp. 919–925. https://doi.org/10.1016/j.wear.2012.11.01310.1016/j.wear.2012.11.013 ↗
4. Sivebaek, I.M., Samoilov, V.N., and Persson, B.N.J., Frictional properties of confined polymers, Eur. Phys. J. E, 2008, vol. 27, no. 1, pp. 37–46. https://doi.org/10.1140/epje/i2008-10349-810.1140/epje/i2008-10349-8 ↗
5. Pozdnyakov, A.O., Formation of decomposition products of macromolecules upon friction of polymer against polymer, Tech. Phys. Lett., 2023, suppl. 2, pp. S107–S111. https://doi.org/10.1134/S106378502390050910.1134/S1063785023900509 ↗
6. Tribology of Polymeric Nanocomposites: Friction and Wear of Bulk Materials and Coatings, Friedrich, K. and Schlarb, A.K., Eds., Butterworth-Heinemann, 2008. https://doi.org/10.1016/C2011-0-09093-210.1016/C2011-0-09093-2 ↗
7. Pozdnyakov, A.O., Chernyshov, M.I., Semencha, A.V., Nikolaev, V.I., Kobykhno, I.A., and Fadin, Yu.A., An instrument for friction parameters registration, Izv. Vyssh. Uchebn. Zaved., Priborostr., 2020, vol. 63, no. 10, pp. 950–955. https://doi.org/10.17586/0021-3454-2020-63-10-950-95510.17586/0021-3454-2020-63-10-950-955 ↗
8. Sedakova, E.B. and Kozyrev, Yu.P., Transfer films in a PTFE–steel pair at different temperatures, Russ. Eng. Res., 2017, vol. 37, no. 10, pp. 863–865. https://doi.org/10.3103/S1068798X1710019710.3103/S1068798X17100197 ↗
9. Persson, B.N.J., Sliding Friction: Physical Principles and Applications, NanoScience and Technology, Berlin: Springer, 2000, 2nd ed. https://doi.org/10.1007/978-3-662-04283-010.1007/978-3-662-04283-0 ↗
10. Brandrup, J., Immergut, E.H., and Grulke, E.A., Polymer Handbook, Two Volumes Set, Wiley, 1989, 4th ed.
11. Conte, M., Pinedo, B., and Igartua, A., Frictional heating calculation based on tailored experimental measurements, Tribol. Int., 2014, vol. 74, pp. 1–6. https://doi.org/10.1016/j.triboint.2014.01.02010.1016/j.triboint.2014.01.020 ↗
12. Mergler, Y.J., Schaake, R.P., and Huis in’t Veld, A.J., Material transfer of POM in sliding contact, Wear, 2004, vol. 256, nos. 3–4, pp. 294–301. https://doi.org/10.1016/s0043-1648(03)00410-110.1016/s0043-1648(03)00410-1 ↗
13. Samyn, P. and Baets, P.D., Friction and wear of acetal: A matter of scale, Wear, 2005, vol. 259, nos. 1–6, pp. 697–702. https://doi.org/10.1016/j.wear.2005.02.05510.1016/j.wear.2005.02.055 ↗
14. Pozdnyakov, A.O., Ginzburg, B.M., Lishevich, I.V., Popov, E.O., and Pozdnyakov, O.F., Mass-spectrometric studies of polymer friction, Vopr. Materialoved., 2013, no. 4, pp. 265–274.
15. Sawada, H., Thermodynamics of Polymerization, New York: Marcel Dekker, 1976.
16. Rigby, D., Sun, H., and Eichinger, B.E., Computer simulations of poly (ethylene oxide): Force field, PVT diagram and cyclization behaviour, Polym. Int., 1997, vol. 44, no. 3, pp. 311–330. https://doi.org/10.1002/(SICI)1097-0126(199711)44:3<311::AID-PI880>3.0.CO;2-H10.1002/(SICI)1097-0126(199711)44:3<311::AID-PI880>3.0.CO;2-H ↗
17. Privalko, V.P., The glass temperature of polytetrafluoroethylene and polyoxymethylene, Polym. Sci. U.S.S.R., 1976, vol. 18, no. 6, pp. 1392–1397. https://doi.org/10.1016/0032-3950(76)90331-210.1016/0032-3950(76)90331-2 ↗
18. Li, S. and Sedakova, E.B., Application of molecular dynamic modeling to study the structural changes during adhesive wear of polytetrafluoroethylene and its composite, Advances in Mechanical Engineering, Evgrafov, A.N., Ed., Lecture Notes in Mechanical Engineering, Cham: Springer, 2021, pp. 70–77. https://doi.org/10.1007/978-3-030-91553-7_810.1007/978-3-030-91553-7_8 ↗
19. Islam, K., Saha, S., and Masud, A.K.M., Molecular dynamics simulation of the mechanical properties of CNT-polyoxymethylene composite with a reactive forcefield, Mol. Simul., 2020, vol. 46, no. 5, pp. 380–387. https://doi.org/10.1080/08927022.2020.171190410.1080/08927022.2020.1711904 ↗
20. Chen, N., Maeda, N., Tirrell, M., and Israelachvili, J., Adhesion and friction of polymer surfaces: The effect of chain ends, Macromolecules, 2005, vol. 38, no. 8, pp. 3491–3503. https://doi.org/10.1021/ma047733e10.1021/ma047733e ↗