Wear-Free Friction of Steel on Glass in Organic Liquids and Water
Source abstract
Abstract
Abstract The paper considers wear-free friction of ShKh-15 (ShKh) steel balls on the surface of quartz glass (QG) and borosilicate glass (BG) vessels in organic liquids and water. It is shown that it is impossible to accurately predict which material will wear out faster: hard or soft, ball or substrate. The highest correlation between the wear of coupling friction surfaces is found for balls and the total wear of working bodies (r ≈ 1). In the group of glass balls, the balls wear out more often (19 out of 21 tests) than in the group of steel balls (5 out of 9 tests). Wearless friction is more often observed in coupled pairs BG/ShKh (5 cases) than in pairs QG/ShKh (1 case). Coupling surfaces containing only one terminal SiOH group do not provide wear-free boundary friction. The usefulness of the work is in the fact that the results of studies of wear-free friction obtained for the ShKh/H2O pair can find practical application in the creation of bearings and large human joints.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Adhesion, Friction, and Surface Interactions · Tribology and Wear Analysis · Lubricants and Their Additives
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. Garkunov, D.N. and Kragel’skii, I.V., The wearless effect, SU Discovery no. 41 dated November 11, 1956.
2. Dukhovskoj, E.A., Onishchenko, V.S., Ponomarev, A.N., Silin, A.A., and Tal’roze, V.L., The phenomenon of anomalously low friction in vacuum, SU Discovery no. 121 dated September 16, 1969.
3. Kuzharov, A.S., The concept of wearless in modern tribology, Izv. Vyssh. Uchebn. Zaved. Sev.-Kavkazskii Region. Tekh. Nauki, 2014, no. 2, pp. 23–31.
4. Malyshev, V.N. and Pichugin, S.D., Study of rubbing surfaces changes under the effect of the no-wear conditions, Sovrem. Naukoemkie Tekhnol., 2019, nos. 10–2, pp. 273–279.
5. Da Cruz, M.G.A., Budnyak, T.M., Rodrigues, B.V.M., Budnyk, S., and Slabon, A., Biocoatings and additives as promising candidates for ultralow friction systems, Green Chem. Lett. Rev., 2021, vol. 14, no. 2, pp. 358–381. https://doi.org/10.1080/17518253.2021.192128610.1080/17518253.2021.1921286 ↗
6. Myshkin, N.K. and Grigoriev, A.Ya., Green tribology and sustainable development, XIV Mezhdunarodnaya nauchno-tekhnicheskaya konferenciya Tribologiya – mashinostroeniyu, posvyashchennaya 100-letiyu so dnya rozhdeniya A.P. Semenova. Sbornik trudov konferentsii (XIV International Scientific and Technical Conference Tribology to Machinery Manufacture devoted to the 100th Birthday of A.P. Semenov: Proc. Conf.), Moscow, 2022, Samusenko, V.D. and Buyanovskii, I.A., Eds., Moscow: Inst. Mashinovedeniya im. A.A. Blagonravova Ross. Akad. Nauk, 2022, pp. 229–230.
7. Roberts, E.W., Ultralow friction films of MoS2 for space applications, Thin Solid Films, 1989, vol. 181, nos. 1–2, pp. 461–473. https://doi.org/10.1016/0040-6090(89)90515-410.1016/0040-6090(89)90515-4 ↗
8. Erdemir, A., Bindal, C., and Fenske, G.R., Formation of ultralow friction surface films on boron carbide, Appl. Phys. Lett., 1996, vol. 68, no. 12, pp. 1637–1639. https://doi.org/10.1063/1.11567610.1063/1.115676 ↗
9. Erdemir, A., Halter, M., and Fenske, G.R., Preparation of ultralow-friction surface films on vanadium diboride, Wear, 1997, vol. 205, nos. 1–2, pp. 236–239. https://doi.org/10.1016/s0043-1648(96)07508-410.1016/s0043-1648(96)07508-4 ↗
10. Zum Gahr, K.-H. and Voelker, K., Friction and wear of SiC fiber-reinforced borosilicate glass mated to steel, Wear, 1999, vols. 225–229, pp. 885–895. https://doi.org/10.1016/S0043-1648(99)00054-X10.1016/S0043-1648(99)00054-X ↗
11. Kano, M., Yasuda, Y., Okamoto, Y., Mabuchi, Y., Hamada, T., Ueno, T., Ye, J., Konishi, S., Takeshima, S., Martin, J.M., De Barros Bouchet, M.I., and Mognee, T.L., Ultralow friction of DLC in presence of glycerol mono-oleate (GNO), Tribol. Lett., 2005, vol. 18, no. 2, pp. 245–251. https://doi.org/10.1007/s11249-004-2749-410.1007/s11249-004-2749-4 ↗
12. Joly-Pottuz, L., Dassenoy, F., Belin, M., Vacher, B., Martin, J.M., and Fleischer, N., Ultralow-friction and wear properties of IF–WS2 under boundary lubrication, Tribol. Lett., 2005, vol. 18, no. 4, pp. 477–485. https://doi.org/10.1007/s11249-005-3607-810.1007/s11249-005-3607-8 ↗
13. De, B., Bouchet, M.I., Matta, C., Le-Mogne, Th., Martin, J.M., Zhang, Q., Goddard III, W., Kano, M., and Ye, J., Superlubricity mechanism of diamond-like carbon with glycerol, J. Phys.: Conf. Ser., 2007, vol. 89, p. 12003. https://doi.org/10.1088/1742-6596/89/1/01200310.1088/1742-6596/89/1/012003 ↗
14. Makowski, S., Schaller, F., Weihnacht, V., Englberger, G., and Becker, M., Tribochemical induced wear and ultra-low friction of superhard ta-C coatings, Wear, 2017, vols. 392–393, pp. 139–151. https://doi.org/10.1016/j.wear.2017.08.01510.1016/j.wear.2017.08.015 ↗
15. Maksimkin, A.V., Danilov, V.D., Senatov, F.S., Olifirov, L.K., and Kaloshkin, S.D., Wear performance of bulk oriented nanocomposites UHMWPE/FMWCNT and metal-polymer composite sliding bearings, Wear, 2017, vols. 392–393, pp. 167–173. https://doi.org/10.1016/j.wear.2017.09.02510.1016/j.wear.2017.09.025 ↗
16. Stoyanov, P., Merz, R., Stricker, M., Kopnarski, M., and Dienwiebel, M., Achieving ultra-low friction with diamond/metal systems in extreme environments, Materials, 2021, vol. 14, no. 14, p. 3791. https://doi.org/10.3390/ma1414379110.3390/ma14143791 ↗
17. Ferreira, V., Yoshimura, H.N., and Sinatora, A., Ultra-low friction coefficient in alumina–silicon nitride pair lubricated with water, Wear, 2012, vol. 296, nos. 1–2, pp. 656–659. https://doi.org/10.1016/j.wear.2012.07.03010.1016/j.wear.2012.07.030 ↗
18. Barthel, A.J. and Kim, S.H., Surface chemistry dependence of water adsorption on solid substrates in humid ambient and humidity effects on wear of copper and glass surfaces, Tribol. – Mater., Surf. Interfaces, 2013, vol. 7, no. 2, pp. 63–68. https://doi.org/10.1179/1751584x13y.000000002610.1179/1751584x13y.0000000026 ↗
19. He, H., Qian, L., Pantano, C.G., and Kim, S.H., Effects of humidity and counter-surface on tribochemical wear of soda-lime-silica glass, Wear, 2015, vols. 342–343, pp. 100–106. https://doi.org/10.1016/j.wear.2015.08.01610.1016/j.wear.2015.08.016 ↗
20. Konicek, A.R., Grierson, D.S., Gilbert, P.U.P.A., Sawyer, W.G., Sumant, A.V., and Carpick, R.W., Origin of ultralow friction and wear in ultrananocrystalline diamond, Phys. Rev. Lett., 2008, vol. 100, no. 23, p. 235502. https://doi.org/10.1103/physrevlett.100.23550210.1103/physrevlett.100.235502 ↗
21. Ma, L., Zhang, C., and Liu, S., Progress in experimental study of aqueous lubrication, Chin. Sci. Bull., 2012, vol. 57, no. 17, pp. 2062–2069. https://doi.org/10.1007/s11434-012-5031-410.1007/s11434-012-5031-4 ↗
22. Chen, Z., He, X., Xiao, C., and Kim, S.H., Effect of humidity on friction and wear—A critical review, Lubricants, 2018, vol. 6, no. 3, p. 74. https://doi.org/10.3390/lubricants603007410.3390/lubricants6030074 ↗
23. Hod, O., Meyer, E., Zheng, Q., and Urbakh, M., Structural superlubricity and ultralow friction across the length scales, Nature, 2018, vol. 563, no. 7732, pp. 485–492. https://doi.org/10.1038/s41586-018-0704-z10.1038/s41586-018-0704-z ↗
24. Reid, E.E., Organic Chemistry of Bivalent Sulfur, vol. 1, New York: Chemical Publishing, 1958.
25. Reid, E.E., Organic Chemistry of Bivalent Sulfur, vol. 3, New York: Chemical Publishing, 1960.
26. Voronkov, M.G., A new laboratory method for the production of absolutized alcohol, Izv. Latv. SSR, Ser. Khim., 1963, no. 2, p. 236.
27. Optical quartz silica, 2014. https://worldofmaterials.ru/ spravochnik/novye-razrabotki/119-opticheskoe-kvartsevoe-steklo.
28. Simax glass by ISO 3585 standard, 2021. https://pcgroup.ru/blog/steklo-simax-po-standartu-iso-3585.
29. Moos hardness of steel, Vse Svoimi Rukami, 2021. https://rustaste.ru/tverdost-stali-po-moosu.html.
30. Nakayama, K. and Hashimoto, H., Triboemission, tribochemical reaction, and friction and wear in ceramics under various n-butane gas pressures, Tribol. Int., 1996, vol. 29, no. 5, pp. 385–393. https://doi.org/10.1016/0301-679x(95)00077-h10.1016/0301-679x(95)00077-h ↗
31. Li, H., Xu, T., Wang, C., Chen, J., Zhou, H., and Liu, H., Friction-induced physical and chemical interactions among diamond-like carbon film, steel ball and water and/or oxygen molecules, Diamond Relat. Mater., 2006, vol. 15, no. 9, pp. 1228–1234. https://doi.org/10.1016/j.diamond.2005.09.03810.1016/j.diamond.2005.09.038 ↗
32. Midlton, M.R., Analiz statisticheskikh dannykh Microsoft Excel dlya Office XP (Analyzing Statistical Data by Microsoft Excel for Office XP), Moscow: Binom. Laboratoriya Znanii, 2005.