Technique of Real-Time Detection of Technical Surface Defects
Source abstract
Abstract
Abstract— A technique and an algorithm of digital surface image processing are proposed to increase the validity of real-time detection of small size defects. The algorithm is implemented in the MATLAB programming environment. The technique is based on segmentation of the high-frequency component of surface texture because small size defects are especially pronounced in this component. The high-frequency component, in particular roughness, is extracted by means of wavelet transform for frequency components separation and homomorphic filtration for compensation of low-frequency distortion caused by nonuniform illumination of test surface. Segmentation of the high-frequency texture component consists in formation of a binary image using the texture descriptors derived from the gray-level co-occurrence matrix as the segmentation threshold. The proposed technique and algorithm are approved in applications to defect detection for a simulated surface, for real ground surface of hardened steel, and for surfaces of carbon fiber reinforced plastic composite. Extraction efficiency of the high-frequency component of surface texture is shown. It is found that texture descriptors, “contrast’ and “energy,” can be applied as segmentation thresholds for defect extraction/determination on the ground (anisotropic) surface while segmentation of an image of a plastic composite (isotropic) surface is effective just with “energy” as a threshold. The proposed technique can be applied for simultaneously real-time monitoring the surface texture and detecting the small size defect in machine vision systems during production and operation of tribosystems.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Manufacturing Process and Optimization · Engineering Technology and Methodologies · Industrial Vision Systems and Defect Detection
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Kragel’skii, I.V., Trenie i iznos (Friction and Wear), Moscow: Mashinostroenie, 1968.
2. Grigor’ev, A.Ya., Fizika i mikrogeometriya tekhnicheskikh poverkhnostei (Physics and Microgeometry of Technical Surfaces), Minsk: Belorusskaya Nauka, 2016.
3. Naresh, P., Hussain, S.A., and Prasad, D.B., Surface roughness measurement of machined surfaces by machine vision technique, Int. J. Recent Technol. Eng., 2019, vol. 7, no. 1, pp. 129–134.
4. Ren, Z., Fang, F., Yan, N., and Wu, Yo., State of the art in defect detection based on machine vision, Int. J. Precis. Eng. Manuf.–Green Technol., 2022, vol. 9, no. 2, pp. 661–691. https://doi.org/10.1007/s40684-021-00343-610.1007/s40684-021-00343-6 ↗
5. Ghafil, H.N. and Ali, D.M.B., Cracks measurement on the basis of machine vision, Int. J. Video Image Process., 2016, no. 16, pp. 160 606–8585.
6. Rosenboom, L., Kreis, T., and Jüptner, W., Surface description and defect detection by wavelet analysis, Meas. Sci. Technol., 2011, vol. 22, no. 4, p. 045102. https://doi.org/10.1088/0957-0233/22/4/04510210.1088/0957-0233/22/4/045102 ↗
7. Jibin, J.G. and Arunachalam, N., Illumination compensated images for surface roughness evaluation using machine vision in grinding process, Procedia Manuf., 2019, vol. 34, pp. 969–977. https://doi.org/10.1016/j.promfg.2019.06.09910.1016/j.promfg.2019.06.099 ↗
8. Lucas, K., Sanz-Lobera, A., Antón-Acedos, P., and Amatriain, A.A., A survey of bidimensional wavelet filtering in surface texture characterization, Procedia Manuf., 2019, vol. 41, pp. 811–818. https://doi.org/10.1016/j.promfg.2019.10.00410.1016/j.promfg.2019.10.004 ↗
9. Markova, L.V., Kong, H., and Han, H.-G., A method for extracting the surface roughness profile based on empirical mode decomposition, J. Frict. Wear, 2021, vol. 42, no. 6, pp. 415–421. https://doi.org/10.3103/S106836662106005210.3103/S1068366621060052 ↗
10. Wang, X., Shi, T., Liao, G., Zhang, Yi., Hong, Yu., and Chen, K., Using wavelet packet transform for surface roughness evaluation and texture extraction, Sensors, 2017, vol. 17, no. 4, p. 933. https://doi.org/10.3390/s1704093310.3390/s17040933 ↗
11. Dutta, S., Pal, S.K., and Sen, R., Tool condition monitoring in turning by applying machine vision, J. Manuf. Sci. Eng., 2015, vol. 138, no. 5, pp. MANU-15-1182. https://doi.org/10.1115/1.403177010.1115/1.4031770 ↗
12. Joshi, K. and Patil, B., Prediction of surface roughness by machine vision using principal components based regression analysis, Procedia Comput. Sci., 2020, vol. 167, pp. 382–391. https://doi.org/10.1016/j.procs.2020.03.24210.1016/j.procs.2020.03.242 ↗
13. Selivanov, A.S., Sevast’yanov, A.A., Luk’yanov, A.A., and Bobrovskii, N.M., Features of formation of surface microrelief in quenched steel at ultrasonic hardening treatment by burnishing, Fundam. Prikl. Probl. Tekh. Tekhnol., 2018, no. 5, pp. 13–20.
14. El-Hofy, M.H., Milling routing of carbon fibre reinforced plastic (CFRP) composites, PhD Thesis, Birmingham: Univ. of Birmingham, 2014.