Tribotechnical Properties of Cu–Al Antifriction Gas Thermal Coatings in Liquid and Grease Lubricants
Source abstract
Abstract
Abstract— The study of the structural-phase state and tribotechnical properties of antifriction gas-thermal coatings made of aluminum alloy AlSi12, welding bronze CuSi3Mn1, as well as composite material CuSi3Mn1 + AlSi12 and a coating of bronze CuSn10P1 obtained by centrifugal induction surfacing was carried out. It is shown that composite gas-thermal coatings from CuSi3Mn1 + AlSi12 after spraying include Cu, Al, Cu9Al4, CuAl2, Cu3Al, Si, and Al2O3 phases. The matrix phase of the bronze interlayers is doped with aluminum, while the Al interlayers are doped with copper. It has been established that annealing of coatings CuSi3Mn1 + AlSi12 at temperatures of 175 and 225°С for 2 h leads to the release of an additional amount of intermetallic compounds in them and an increase in their microhardness. It is shown that composite gas-thermal coatings have ≈1.2–1.7 times higher wear resistance in the environment of I-20A and Litol-24 lubricants compared to coatings of CuSn10P1 bronze. Annealing of composite coatings from CuSi3Mn1 + AlSi12 leads to an increase in their wear resistance in the environment of I-20A liquid lubricant up to 30% and Litol-24 up to 20% compared to the initial state. The coefficients of friction of all antifriction coatings based on copper in the environment of the I-20A lubricant did not exceed 0.08, and in the environment of the Litol-24 lubricant, 0.10.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Surface Treatment and Coatings · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Filippov, M.A. and Sheshukov, O.Ju., Trenie i antifrikcionnye materialy: uchebnoe posobie (Friction and Antifriction Materials, The School-Book), Ekaterinburg: Ural. Univ., 2021.
2. Kordikova, E.I., Tribotekhnika: konspekt lektsii (Tribological Engineering), Minsk: BGTU, 2013.
3. Rybakova, L.M. and Kuksenova, L.I., Struktura i iznosostoikost' metalla (Metal Structure and Wear Resistance), Moscow: Mashinostroenie, 1982.
4. Stoljarova, O.O. et al., Microscopic investigation of the surface of antifriction multicomponent aluminum alloys, Fiz. Mezomekh., 2016, vol. 19, no. 5, pp. 105–114.
5. Marukovich, E.I., Stetsenko, V.Y., Kukareko, V.A., and Grigorchik, A.N., Tribotechnical study of antifriction silumin AlSi15Cu3, J. Frict. Wear, 2020, vol. 41, no. 2, pp. 95–101.10.3103/S1068366620020099 ↗
6. Belotserkovskii, M.A., Tekhnologii aktivirovannogo gazoplamennogo napyleniya antifriktsionnykh pokrytii (Technologies of Activated Flame Spraying of Antifriction Coatings, Minsk: Tehnoprint, 2004.
7. Grigorchik, A.N., Kukareko, V.A., Astrashab, E.V. Belotserkovskij, M.A.,, and Sosnovskii, A.V., The influence of aluminum on the structural-phase state, corrosion resistance and tribomechanical properties of composite coatings obtained by high-speed metallization, Uprochn. Technol. Pokryt., 2022, vol. 18, no. 1 (205), pp. 18–23.10.36652/1813-1336-2022-18-1-18-23 ↗
8. Kukareko, V.A., Belotserkovskii, M.A., Grigorchik, A.N., and Sosnovskii, A.V., Structure and tribological properties of a Ti-TiN coating obtained by hypersonic metallization, J. Frict. Wear, 2022, vol. 43, no. 5, pp. 300–304.10.3103/S1068366622050075 ↗
9. Grigorchik, A.N., Astrashab, E.V., Belotserkovskii, M.A., Sosnovskii, A.V., Kukareko, V.A., and Dudan, A.N., Wear resistance of gas-thermal coatings from copper-alloys on the basis of copper obtained by high-speed metallization method, Vestn. Polots. Univ., Ser. B: Prom-st, Prikl. Nauki. Materialoved., 2019, no. 11, pp. 39–44.
10. Kononov, A.G., Kukareko, V.A., Belyi, A.V., and Sharkeev, Yu.P., Ion-modified submicrocrystalline titanium and zirconium alloys for medicine and mechanics, Mekh. Mashin, Mekhanizm. Mater., 2013, no. 1 (22), pp. 47–53.
11. Geguzin, Ja.E., Diffuzionnaya zona (Diffusion Zone), Moscow: Nauka, 1979.
12. Astrashab, E.V., Grigorchik, A.N., Kukareko, V.A., and Belotserovskii, M.A., Effect of heat treatment on the structure, phase composition, and wear resistance of thermal spray coatings of the pseudoalloy 08G2S + AK12, J. Frict. Wear, 2020, no. 1, pp. 6–11.10.3103/S1068366620010031 ↗