Rotor-to-Stator Friction Simulation with Nonconstant Stiffness of the Contact Surfaces and Small Clearance between Them
Source abstract
Abstract
Abstract Analytical and numerical modeling approaches for the contact-working system of turbo- and electric machines have been developed. The simulation allows determining some dynamic characteristics and loads in the rotor–stator system when there is a loss in clearance between them and there occurs subsequent motions with impacts or without separation from each other. In the system, the rotor and stator are deformable, the stiffness of rubbing surfaces is variable, and the working clearance between them is extremely small (50–500 times less than the rotor radius at the contact point). It is shown that the effect of the absolute elasticity for stator generates a significant change in natural oscillations of the coupled rotor–stator system, that is, a significant change in its eigenfrequencies and eigenmodes. It is noted that the elastic deformation of rubbing surfaces leads to a nonlinear increase in their contact stiffness, which consists of quasi-static and dynamic components. The consequences of an extremely small clearance are an elastic deformation of the contact surfaces commensurate with it (up to half the clearance size at the point of contact) during whirling with slipping of rotor over stator, as well as the disappearance of pure rolling, which is accompanied by the actual absence of rotary speeds even at low frequencies of contact whirling. The resulting diagrams of changes in the contact stiffness and whirling frequencies and the XY trajectories can serve as sources of initial information for identifying the operation of a real rotary machine on the threshold of a dangerous whirling with slipping and whipping and for further studies of contact oscillations of rotors.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Magnetic Bearings and Levitation Dynamics · Tribology and Lubrication Engineering · Brake Systems and Friction Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (12)
Show source-provided references
1. Banakh, L.Y. and Andtyves, L.I., Experimental analysis of the kinematics of motion of floating elements in rotor mechanisms, J. Mach. Manuf. Reliab., 2020, vol. 49, no. 3, pp. 184–188. https://doi.org/10.3103/S105261882003004810.3103/S1052618820030048 ↗
2. Kurakin, A.D., Effect of friction on vibrational characteristics of rotor system during rotor-stator interaction, Vestn. Perm. Politekh. Univ., Aerokosm. Tekh., 2020, no. 61, pp. 22–30. https://doi.org/10.15593/2224-9982/2020.61.0310.15593/2224-9982/2020.61.03 ↗
3. Nikiforov, A.N., Prikladnaya poluempiricheskaya teoriya bezotryvnogo dvizheniya rotora po statoru (Applied Semi-Empirical Theory of Non-Separated Motion of the Rotor along the Stator), St. Petersburg: SUPER, 2021.
4. Shatokhin, V.F., Turbine generator rotor vibrations with rubbing in the span and supports, Therm. Eng., 2020, vol. 67, no. 5, pp. 266–270. https://doi.org/10.1134/S004060152005009210.1134/S0040601520050092 ↗
5. Alber, O., Experimental analysis of rotor-stator contact with many degrees of freedom, in Proceedings of the 9th IFToMM International Conference on Rotor Dynamics, Vol. 21 of Mechanisms and Machine Science, Cham: Springer, 2015, pp. 1935–1944. https://doi.org/10.1007/978-3-319-06590-8_16010.1007/978-3-319-06590-8_160 ↗
6. Al-Shudeifat, M.A., Friswell, M., Shiryayev, O., and Nataraj, C., On post-resonance backward whirl in an overhung rotor with snubbing contact, Nonlin. Dyn., 2020, vol. 101, pp. 741–754. https://doi.org/10.1007/s11071-020-05784-310.1007/s11071-020-05784-3 ↗
7. Chipato, E., Shaw, A.D., and Friswell, M.I., Frictional effects on the nonlinear dynamics of an overhung rotor, Commun. Nonlin. Sci. Numer. Simul., 2019, vol. 78, p. 104875. https://doi.org/10.1016/j.cnsns.2019.10487510.1016/j.cnsns.2019.104875 ↗
8. Krishna, I.R.P. and Padmanabhan, C., Experimental and numerical investigations on rotor-stator rub, J. Mech. Eng. Sci., 2018, vol. 232, pp. 3200–3212. https://doi.org/10.1177/095440621773534810.1177/0954406217735348 ↗
9. Mercier, A., Jézéquel, L., Besset, S., Hamdi, A., and Diebold, J.-F., Studies on detachment non-linearity at the rotor-stator interface, J. Sound Vibrat., 2020, vol. 468, p. 115084. https://doi.org/10.1016/j.jsv.2019.11508410.1016/j.jsv.2019.115084 ↗
10. Peletan, L., Baguet, S., Torkhani, M., and Jacquet-Richardet, G., Quasi-periodic harmonic balance method for rubbing self-induced vibrations in rotor-stator dynamics, Nonlin. Dyn., 2014, vol. 78, pp. 2501–2515. https://doi.org/10.1007/s11071-014-1606-810.1007/s11071-014-1606-8 ↗
11. Varney, P. and Green, I., Rough surface contact of curved conformal surfaces: An application to rotor-stator rub, Trans. ASME, J. Tribol., 2016, vol. 138, no. 4, pp. 041401-1–7. https://doi.org/10.1115/1.403278610.1115/1.4032786 ↗
12. Yu, P. and Chen, G., Nonlinear modal analysis and its application on prediction of resonance speed for a rotor-stator rubbing system, J. Braz. Soc. Mech. Sci. Eng., 2021, vol. 43, p. 209. https://doi.org/10.1007/s40430-021-02918-510.1007/s40430-021-02918-5 ↗