Adaptation of the Structure of Subsurface Layers of Antifriction Copper Alloys during Friction with Various Lubricants
Source abstract
Abstract
Abstract The structural parameters of subsurface microvolumes of copper alloys (intrinsic X-ray lines broadening and the solid solution lattice parameter, the degree of frictional hardening) during friction in the medium of active and inactive lubricants are considered. Their variations under the conditions of contact deformation are experimentally shown and an interpretation of the influence on tribological characteristics (running-in ability, wear rate) is given. The structural parameters and their adaptation to friction loading conditions are compared with the running-in ability, adaptability, and wear resistance of antifriction alloys and their relationship is revealed, which manifests itself in a joint change in structural and tribological parameters depending on the composition of antifriction materials and the nature of lubricants. Recommendations on the selection of the composition of antifriction copper alloys for friction units are given: for aluminum bronzes used as a material for heavily loaded pinned joints, the operation of which runs in a medium with surface-active lubricant components, long-term performance is ensured by a single-phase alloy with a large margin of plasticity (BrA5, BrA7).
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Powder Metallurgy Techniques and Materials · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. Kuksenova, L.I., Kuleshova, E.M., and Polyakov, S.A., The kinetics of load-bearing capacity formation of sliding pairings in the use of nanomodified lubricants, Frict. Wear, 2019, vol. 40, no. 6, pp. 541–545.
2. Kuksenova, L.I. and Polyakov, S.A., Formation of dynamic structure of surface layers of materials of sliding joints in different lubricants, MiTOM, 2019, no. 11 (773), pp. 39–43.
3. Korshunov, L.G., Shabanov, V.A., Chernenko, N.L., and Pilyugin, V.P., The effect of contact stresses on the phase composition, strength and tribological properties of nanocrystal structures formed in steels and alloys upon sliding friction, MiTOM, 2008, no. 12, pp. 24–33.10.1007/s11041-009-9103-2 ↗
4. Perfilyev, V. and Rapoport, L., Effect of plastic deformation and damage development during friction of FCC metals in the conditions of boundary lubrication, Lubricants, 2019, vol. 7, no. 5, p. 45.10.3390/lubricants7050045 ↗
5. Alekseev, N.M., Regularities of plastic flow and destruction of metals when rubbing surfaces seize, Extended Abstract of Doctoral (Tech. Sci.) Dissertation, Moscow: Gubkin Mosc. Inst. Petrochem. Gas Ind., 1983.
6. Kragel'skij, I.V., Alekseev, N.M., Rybakova, L.M., and Nazarov, A.N., Influence of hardening of materials during friction on their resistance to scuffing, Mashinovedenie, 1977, no. 6, pp. 88–94.
7. Polyakov, S.A. and Kuksenova, L.I., Methods for estimating the adaptive properties of mechanical systems as means of improving their performance indicators, J. Mach. Manuf. Reliab., 2017, vol. 46, no. 1, pp. 20–24.10.3103/S1052618817010125 ↗
8. Rybakova, L.M. and Kuksenova, L.I., Struktura i iznosostoikost’ metalla (Structure and Wear Resistance of Metal), Moscow: Mashinostroenie, 1982.
9. Bushe, N.A. and Kopyt’ko, V.V., Sovmestimost’ trushchikhsya poverkhnostei (Wear Compatibility), Moscow: Nauka, 1981.
10. Polyakov, S.A., Samoorganizatsiya pri trenii i effekt bezyznosnosti (Self-Organization during Friction and the Effect of Wearlessness), Moscow: TSKhA, 2009.
11. Simakov, Yu.S., Physicochemical processes during selective transfer, in Izbiratel’nyi perenos v tyazhelonagruzhennykh uzlakh treniya (Selective Transfer in Heavily Loaded Friction Units), Garkunov, D.N., Ed., Moscow: Mashinostroenie, 1982, pp. 88–111.
12. Savenko, V.I., The role of the Rebinder effect in the implementation of the wear-free regime in tribological engineering, Effekt Bezyznosn. Tribotekhnol., 1994, nos. 3–4, pp. 26–38.
13. Kuksenova, L.I., Dyakin, S.I., Titov, V.V., Gromakovskii, S.D., Vyacheslavova, L.A., and Rybakova, L.M., Influence of structural changes and properties of surface layers of materials on the bearing capacity and durability of hinged bolted joints, Trenie Iznos, 1988, vol. 9, no. 3, pp. 422–428.
14. Smiryagin, A.P., Smiryagina, N.A., and Belova, A.V., Promyshlennye tsvetnye metally i splavy. Spravochnik (Industrial Non-Ferrous Metals and Alloys, The Handbook), Moscow: Metallurgiya, 1974.
15. Polyakov, S.A. and Kuksenova, L.I., Formation of antiscoring properties of materials during dynamic adaptation of surface layers to operational conditions, J. Frict. Wear, 2008, vol. 29, no. 3, pp. 210–217.10.3103/S1068366608030100 ↗
16. Vladimirov, V.I., Problems in the physics of friction and wear, in Fizika iznosostoikosti poverkhnosti metallov (Physics of Wear Resistance of Metal Surfaces), Leningrad: Akad. Nauk SSSR, FTI im. A.F. Ioffe, 1988, pp. 8–41.
17. Polyakov, S.A. and Kuksenova, L.I., Formation of mechanical properties of friction surfaces by methods of physical and chemical mechanics of materials, Remont. Vosstanovl. Moderniz., 2018, no. 2, pp. 25–33.