Determination of the Friction Coefficient in Contacts during Static-Dynamic Interaction of Contacting Bodies
Source abstract
Abstract
The article substantiates the need to determine the friction coefficient when modeling the hybrid deformation processes. The method for determining the friction coefficient at the static-dynamic interaction of contacting bodies is described. A modernized test bench based on the TRB tribometer is used in our method. The modernization consists in the additional use of an inductor with a generator of pulsed magnetic fields for dynamic loading of the indenter, which allows determining the friction coefficient under a pulsating static-dynamic load. The nature of the acting dynamic force is determined by the parameters of the active and inductive resistance of the discharge circuit: installation–inductor–loaded sample. To assess the dynamic loading, the indentation method is used that gives an integrated assessment of the pulse impact on the test sample. Two pairs of interacting bodies are tested: aluminum–steel (D16–ShKh15) and steel–steel (ShKh15–ShKh15). The friction coefficients are determined at a different ratio of static and dynamic loads. The values of friction coefficients under static–dynamic loading are less by 25–35% than those under static loading. The obtained values of friction coefficient are used to select the type and magnitude of loading in hybrid and combined plastic deformation technologies.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Surface Treatment and Coatings · Engineering Technology and Methodologies · Tribology and Wear Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. Isachenko, E.I., Kontaktnoe trenie i smazki pri obrabotke metallov davleniem (Contact Friction and Lubrication in Metal Forming), Moscow: Mashinostroenie, 1978.
2. Levanov, A.N., Kontaktnoe trenie v protsessakh obrabotki metallov davleniem (Contact Friction in Metal Forming Processes), Moscow: Metallurgiya, 1976.
3. Gruden, A.P., Zilberg, Yu.V., Tilik, V.T., Trenie i smazka pri obrabotke metallov davleniem (Friction and Lubrication in Metal Forming), Moscow: Metallurgiya, 1982.
4. Myshkin, N.K., Goryacheva, I.G., Grigoriev, A.Y., Kavaliova, I.N., and Makhovskaya, Y.Y., Contact interaction in precision tribosystems, J. Frict. Wear, 2020, vol. 41, no. 3, pp. 191–197.10.3103/S1068366620030113 ↗
5. Horng, J.H., Tsukanov, I.Y., Torskaya, E.V., Lapit-skaya, V.A., Kuznetsova, T.A., and Kao, W.H., Determination of mechanical and friction properties of carbon composites at different scale levels, J. Frict. Wear, 2020, vol. 41, no. 2, pp. 102–106.10.3103/S106836662002004X ↗
6. Padgurskas, J., Sabalius, A., Michailov, V., Kazak, N., and Zunda, A., Friction and wear of electrospark coatings made of molybdenum, bronze, and combined (Ti + Al + C) composition on steel 45 in a lubricant medium, J. Frict. Wear, 2021, vol. 42, no. 1, pp. 56–62.10.3103/S1068366621010086 ↗
7. Shelestova, V.A., Grakovich, P.N., Shilko, I.S., Brundukov, A.S., Stratanovich, V.A., Gutsev, D.M., and Ivanov, L.F., The tribotechnical properties of composites based on different grades of fluoroplastic-4 and carbon fibers, J. Frict. Wear, 2021, vol. 42, no. 2, pp. 75–79.10.3103/S1068366621020094 ↗
8. Mikheev, V.A. and Surudin, S.V., Fundamentals of calculating the process of shaping thin shells of double curvature, Izv. Samar. Nauch. Tsentr RAN, 2017, vol. 19, no. 1 (3), pp. 555–562.
9. Glushchenkov, V.A. and Belyaeva, I.A., Hybrid static and magnetic-pulsed loading in sheet stamping, Russ. Eng. Res., 2020, vol. 40, no. 3, pp. 214–217.10.3103/S1068798X20030077 ↗
10. Mikheev, V.A., Smolnikov, S.D., Surudin, S.V., and Savin, D.V., Statistical analysis of stretch shaping process of biconvex skin, Russ. Aeronaut., 2016, vol. 59, no. 1, pp. 145–150.10.3103/S1068799816010232 ↗
11. Glushchenkov, V.A., Technological schemes of hybrid and combined technologies of sheet stamping, combining static and dynamic loading, Kuznech.-Shtamp. Pr-vo, 2014, no. 8, pp. 20–25.
12. Balyakin, V.B., Khatipov, S.A., and Pilla, C.K., Experimental studies of tribotechnical characteristics of radiation-modified polytetrafluoroethylene to use in rotor supports, J. Frict. Wear, 2015, vol. 36, no. 4, pp. 346–349.10.3103/S1068366615040030 ↗
13. Murzin, S.P., Balyakin, V.B., Vasiliev, N.N., and Lichtner, P.I., Determining ways of improving the tribological properties of the silicon carbide ceramic using a pulse-periodic laser treatment, Comput. Opt., 2015, vol. 39, no. 1, pp. 64–69.10.18287/0134-2452-2015-39-1-64-69 ↗
14. Yusupov, R.Yu. and Glushchenkov, V.A., Energeticheskie ustanovki dlya magnitno-impul’snoi obrabotki materialov (Power Plants for Magnetic-Pulse Processing of Materials), Samara: SGAU, 2013.