journal article·2022-08

Tribotechnical Properties of Composite Boron–Carbon Coatings

D. G. Piliptsou

Journal of Friction and Wear· Volume 43· Issue 4
Publisher page

Abstract

Boron-doped carbon coatings have been obtained by means of a technique that combines the deposition thereof using pulsed carbon plasma flows and a boron flow formed based on the evaporation of a target made of boron by a pulsed radiation generated by a solid-state YAG:Nd3+ laser. It has been established that the hardness and elastic modulus of coatings change depending on different boron concentrations. The introduction of boron atoms into the structure of a-C coatings, which leads to the formation of boron–carbon compounds, results not only in changing hardness and elastic modulus, but also in changing the kinetics of Coulomb friction and rider wear. At the early stages of friction, high friction coefficient values are observed depending on the surface roughness and hardness, as well as on the intensity of graphitization and tribochemical reactions in the friction contact zone. The features of friction and wear for contact interfaces containing composite boron–carbon coatings have been studied for the case of different lubricating media and the effect of boron concentration on adsorption and tribotechnical parameters has been assessed. It is shown that increasing boron concentration in the carbon coating leads to an increase in wetting of the coatings by lubricating media. In this case, a significant decrease in the counterbody bulk wear coefficient (by more than 120 times upon friction in boundary lubricant TAD-17) has been registered. The dependence of the friction coefficient on the boron concentration is not monotonic, which is a consequence of different effects of tribochemical and abrasive wear mechanisms.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Piliptsou, D.G., Rudenkov, A.S., Luchnikov, P.A., Rogachev, A.V., Jiang Xiao Hong, and Zhou Bing, Composite Carbon Coatings Deposited from Cathode Pulse Plasma, Moscow: Radiotekhnika, 2020.
2. Teng Fei Zhang et al., Microstructure and high-temperature tribological properties of Si-doped hydrogenated diamond-like carbon film, Appl. Surf. Sci., 2018, vol. 435, pp. 963–973.10.1016/j.apsusc.2017.11.194 ↗
3. Bewilogua, K. and Hofmann, D., History of diamond-like carbon films—from first experiments to worldwide applications, Surf. Coat. Technol., 2014, vol. 242, pp. 214–225.10.1016/j.surfcoat.2014.01.031 ↗
4. Sayan, N.I. et al., Effect of substrate nature and heat treatment of diamond-like coatings on their tribological characteristics, Trenie Iznos, 2005, vol. 26, no. 2, pp. 182–186.
5. Chichinadze, V., Osnovy tribologii: trenie, iznos, smazka (Fundamentals of Tribology: Friction, Wear, Lubrication), Moscow: Mashinostroenie, 2001.
6. Kalin, M. and Vižintin, J., The tribological performance of DLC-coated gears lubricated with biodegradable oil in various pinion/gear material combinations, Wear, 2005, vol. 259, pp. 1270–1280.10.1016/j.wear.2005.02.028 ↗
7. De Jian Sun, M.I. et al., Friction and wear of Cr-Doped DLC films under different lubrication conditions, Vacuum, 2013, vol. 94, pp. 1–5.10.1016/j.vacuum.2013.01.010 ↗
8. Topolyansky, P.A., Ermakov, S.A., and Topolyansky, A.P., Diamond-like coating for hardening and restoration of fuel equipment parts, in Tribology, Mechanical Engineering: Proceedings of the 12th International Scientific and Technical Conference Dedicated to the 80th Anniversary of IMASH RAS, Moscow: 2018, pp. 499–502.
9. Kulesh, E.A. et al., Boron-carbon coatings: Structure, morphology and mechanical properties, J. Eng. Sci., 2020, vol. 7, pp. C1–C9.
10. Piliptsou, D.G. et al., Structural properties of carbon composites doped with boron, Bull. Karag. Univ., Phys. Ser., 2020, vol. 99, no. 3, pp. 31–37.
11. Charitidis, C.A., Nanomechanical and nanotribological properties of carbon-based thin films: A review, Int. J. Refract. Met. Hard Mater., 2010, vol. 28, pp. 51–70.10.1016/j.ijrmhm.2009.08.003 ↗
12. Hansen, N., Hall-Petch relation and boundary strengthening, Scr. Mater., 2004, vol. 51, no. 8, pp. 801–806.10.1016/j.scriptamat.2004.06.002 ↗
13. Zhang, T.Y., Xu, W.H., and Zhao, M.H., The role of plastic deformation of rough surfaces in the size-dependent hardness, Acta Mater., 2004, vol. 52, pp. 57–68.10.1016/j.actamat.2003.08.026 ↗
14. Herrmann, M., Matthey, B., and Gestrich, T., Boron-doped diamond with improved oxidation resistance, Diamond Rel. Mater., 2019, vol. 92, pp. 47–52.10.1016/j.diamond.2018.12.001 ↗
15. Blok, H., Theoretical studies of temperature rise at surfaces of actual contact under oiliness lubricating conditions, Proc. Gen. Discuss. Lubr. Lubr., 1937, vol. 2, pp. 222–235.