journal article·2021-10

Tribotechnical Tests of Electric Spark Coatings

P. A. Ionov, P. V. Senin, A. M. Zemskov, A. V. Stolyarov, I. N. Kravchenko

Journal of Friction and Wear· Volume 42· Issue 5
Publisher page

Abstract

The article presents the results of tribotechnical tests of precision friction pairs of GST-112 “brass–steel distributor” and “piston–bore of the cylinder block bushing” hydrostatic transmission, carried out according to the “roller–block” type on an SMT-1M modernized friction machine. The objects of research are coatings from LMtsSKA 58-2-2-1-1 brass (analog according to EN is CuZn40Mn2Pb2), molybdenum Mo and U10, Sv-08, and 30G steels (analogs according to EN are CT105, C10E, 28Mn6) formed by the method of electrospark treatment on the working surfaces of the parts. A feature of the research was the performance of long-term wear tribotechnical tests at two values of the load, optimal Pop and calculated (operational) Pcalc. The values of pre-pressure, optimal, operational loads in joints and the intensity of wear of electrospark coatings are obtained. It was found that the maximum bearing capacity of friction pairs treated with electric spark machining (ESM) is 1.1–1.2 times higher than the operating load acting on them (obtained by the finite element method), and the wear rate at this load for joints treated with ESM is less than 1.12–1.55 times than that of untreated ones. The results can be used in the development of methods for increasing the durability of volumetric hydraulic drives GST-112.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Lubricants and Their Additives · Electrical Contact Performance and Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Galin, D.A., Evaluation of performance and increase of the durability of the volumetric hydraulic drive GST‑90, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Saransk: Ogarev Modrovia State Univ., 2007.
2. Senin, A.P., Technology of adjustable axial-piston hydraulic machines by restoration of resource-limiting joints, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Saransk: Ogarev Modrovia State Univ., 2012.
3. Zemskov, A.M., Ionov, P.A., and Stolyarov, A.V., Operational tests of the GST-112 volumetric hydraulic drive, Tekh. Oborud. Sela, 2016, no. 9, pp. 38–43.
4. Masalov, R.V., Increase of the durability of axial piston pumps of building and road machines based on modeling of processes in plunger pairs, Extended Abstract of Cand. Sci. (Eng.) Dissertation, Orel: Orel State Tech. Univ., 2005.
5. Ivanov, V.I. and Burumkulov, F.Kh., Electrospark deposition of thick-layer coatings with higer continuity, S-kh. Tekh.: Obsluzhivanie Remont, 2015, no. 7, pp. 34–42.
6. Vlasenko, V.D. and Mulin, Yu.I., Formation of wear- and heat-resistant coatings on the surfaces of titanium alloys by electrospark alloying, Fiz. Khim. Obrab. Mater., 2015, no. 1, pp. 79–84.
7. Velichko, S.A., Martynov, A.V., and Kolomeichenko, A.V., Surface profile formed by electric discharge machining, Russ. Eng. Res., 2019, vol. 39, no. 11, pp. 982–985.10.3103/S1068798X19110182 ↗
8. Senin, P.V., Velichko, S.A., Martynov, A.V., and Martynova, E.G., Increasing the wear resistance of forged tools by electrospark deposition, Surf. Eng. Appl. Electrochem., 2020, vol. 40, no. 5, pp. 427–430.
9. Burumkulov, F.Kh., Lyalyakin, V.P., Pushkin, I.A., and Frolov, S.N., Electric spark processing of metals is a universal method to restore the worn parts, Mekh. Elektrif. Sel’sk. Khoz., 2001, no. 4, pp. 23–28.
10. Senin, P.V., Ionov, P.A., Stolyarov, A.V., and Zemskov, A.M., Device for tribotechnical tests of friction pairs, J. Frict. Wear, 2020, vol. 41, no. 2, pp. 141–145.10.3103/S1068366620020130 ↗