journal article·2022-02

Comparative Analysis of Evolving Phenomenological and Microstructural Parameters in Tribomaterial Caused by Cyclic Rolling

V. I. Savenko

Journal of Friction and Wear· Volume 43· Issue 1
Publisher page

Abstract

The experimental data gathered using the pendulum tribometer technique is used to carry out experimental and theoretical analysis of the pattern changes in the phenomenological (tribotechnical) and microstructural characteristics of the tribomaterial (lithium fluoride monocrystal plate). A tribopair comprising a ball (ShKh15 grade steel) and monocrystal plane (001) models the process underlying multicycle rolling. The temporal relationship is established between the macro and micro-characteristics of the process and the physics and mathematical model is developed. It is shown that the key role is played by microplastic deformation developing in the surface layer of the analyzed contact pair tribomaterial in the multi-cycle rolling mode. It is found that after multicycle tribocontact running-in the total rolling friction coefficient drops to fr ≅ 5 × 10–5 at the final stages of the damping oscillations, the indentation angle increases to ψ ≅ 10–2, and the micro-hardness in the raceway next to the pendulum equilibrium position attains Нμ ≅ 2 GPa. The approach proposed can be used to analyze the processes developing in rolling bearings used in high-precision mechanic devices.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Tribology and Wear Analysis · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. Bowden, F.P. and Tabor, D., Friction and Lubrication of Solids, Oxford: Oxford Univ. Press, 1950.
2. Kragel’skii, I.V., Dobychin, M.N., and Kombalov, V.S., Raschety na trenie i iznos (Calculations of Friction and Wear), Moscow: Mashinostroenie, 1977.
3. Johnson, K., Contact Mechanics, Cambridge: Cambridge Univ. Press, 1985.10.1017/CBO9781139171731 ↗
4. Amateau, M.F. and Spretnak, J.W., Plastic deformation of magnesium oxide subjected to rolling-contact stresses, J. Appl. Phys., 1963, vol. 34, no. 8, pp. 2340–2345.10.1063/1.1702743 ↗
5. Dufrane, K.F. and Glaeser, W.A., Rolling-contact deformation of MgO single crystals, Wear, 1976, vol. 37, no. 1, pp. 21–32.10.1016/0043-1648(76)90176-9 ↗
6. Swain, M.V., Dislocation generation beneath static and rolling contact with a sphere, Wear, 1978, vol. 48, no. 1, pp. 173–180.10.1016/0043-1648(78)90146-1 ↗
7. Zaitsev, O.V., Stress-strain state in the contact zone and resistance to rolling during repeated rolling, Trenie Iznos, 1985, vol. 6, no. 6, pp. 1048–1054.
8. Chepa, P.A., Deformability of the material during indenter rolling in initial plastic contact, Trenie Iznos, 1991, vol. 12, no. 3, pp. 495–500.
9. Dzhonson, K.L., Plastic flow of surfaces during cyclic rolling and sliding, Trenie Iznos, 1992, vol. 13, no. 1, pp. 15–20.
10. Savenko, V.I., Energy dissipation in quasielastic materials during cyclic rolling, J. Frict. Wear, 2009, vol. 30, no. 3, pp. 188–193.10.3103/S1068366609030076 ↗
11. Dzhilavdari, I.Z. and Riznookaya, N.N., Phenomenological theory of micro-swinging of a ball on a contact spot, Trenie Smazka Mash. Mekh., 2010, vol. 5, no. 1, pp. 3–12.
12. Bulanov, E.A., Friction during ball rolling on a plane in plastic deformations, Trenie Smazka Mash. Mekh., 2014, vol. 9, no. 1, pp. 11–14.
13. Izmailov, V.P., Karagioz, O.V., and Shakhparonov, V.M., Hysteresis losses in oscillatory systems, Int. J. Non-Linear Mech., 2015, vol. 77, no. 1, pp. 307–311.10.1016/j.ijnonlinmec.2015.07.006 ↗
14. Savenko, V.I., Izmailov, V.P., Karagioz, O.V., Silin, A.A., and Shchukin, E.D., Application of the pendulum method to the analysis of energy absorption mechanisms in rolling, Trenie Iznos, 1988, vol. 9, no. 2, pp. 211–222.
15. Savenko, V.I. and Karagioz, O.V., Interrelation between tribological and microstructural parameters of a tribomaterial under cyclic rolling, J. Frict. Wear, 2019, vol. 40, no. 5, pp. 404–411.10.3103/S1068366619050143 ↗
16. Markovets, M.P., Opredelenie mekhanicheskikh svoistv metallov po tverdosti (Determination of Mechanical Properties of Metals by Their Hardness), Moscow: Mashinostroenie, 1979.
17. Nevzglyadov, V.G., Teoreticheskaya mekhanika (Theoretical Mechanics), Moscow: Fizmatgiz, 1959.
18. Pisarenko, G.S., Yakovlev, A.P., and Matveev, V.V., Vibropogloshchayushchie svoistva konstruktsionnykh materialov (Vibration-Absorbing Properties of Constructional Materials), Kiev: Naukova Dumka, 1971.
19. Golovin, I.S., Vnutrennee trenie i mekhanicheskaya spektroskopiya metallicheskikh materialov (Internal Friction and Mechanical Spectroscopy of Metal Materials), Moscow: Mosk. Inst. Stali Splavov, 2012.
20. Mikhin, N.M., Vneshnee trenie tverdykh tel (External Friction of Solids), Moscow: Nauka, 1977.