Tribotechnical and Structural Characteristics of Copper-Modified Surface Layers of Heavy Loaded Couples
Source abstract
Abstract
This study demonstrates the efficiency of copper-based coatings on steel of various composition upon friction under conditions of heavy loaded contacts in terms of interrelation between tribotechnical and structural characteristics. The changes in wear of steel–steel friction pairs with brass coatings applied by the friction method, copper coatings applied by the gas thermal method and ion implantation, and coatings of copper film formed in metal cladding lubricant have been analyzed. Formation of a wear resistant structural state has been described (surface layer with reduced hardness, low physical broadening of 7 × 10–3 rad X-ray lines, and hardened subsurface layer). It has been demonstrated that, irrespective of the surface modification with copper or copper alloy, a secondary modified microvolume is formed as a consequence of the structure’s self organization with peculiar properties of a wear resistant structure (plasticized surface film and hardened subsurface layer). Implementation of a multilayer structure of the deformation zone upon friction with the sensitive properties of the material obeying the rule of positive gradient of mechanical properties increases the lifetime of heavy loaded friction pairs.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Material Properties and Applications · Metal Alloys Wear and Properties · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (13)
Show source-provided references
1. Dyachkova, L.N., Feldshtein, E.E., Vityaz, P.A., Błoch, B.M., and Voronetskaya, L.Ya., Effect of copper content on tribological characteristics of Fe–C–Cu composites, J. Frict. Wear, 2018, vol. 39, no. 1, pp. 1–5.10.3103/S1068366618010063 ↗
2. Sheleg, V.K., Levantsevich, M.A., Pilipchuk, E.V., and Dema, R.R., Study of the performance of copper coatings formed by electroplating and deformation cladding with a flexible tool, J. Frict. Wear, 2018, vol. 39, no. 1, pp. 6–11.10.3103/S1068366618010117 ↗
3. Sachek, B.Ya., Mezrin, A.M., Arkhipov, V.E., and Londarskij, A.F., Modification of the tribocouplings by spraying metal coatings to improve their fretting resistance, J. Frict. Wear, 2018, vol. 39, no. 4, pp. 299–303.10.3103/S1068366618040141 ↗
4. Potapov, G.K. and Balabanov, V.I., Finishing anti-friction non-abrasive treatment (FANT) of cylinder liners and necks of engine crankshafts, Eff. Bezyznosnosti Tribotekhnol., 1994, nos. 3–4, pp. 48–53.
5. Savrai, R., Malyshina, I.Yu., Makarov, A.V., Osintseva, A.L., Rogovaya, S.A., and Kolobylin, Yu.M., Influence of laser alloying with Cu–Zn–Ti and Si–Cu powder mixtures on the structure and properties of a cast aluminum alloy, Obrab. Met.: Tekhnol., Oborud., Instrum., 2019, vol. 21, no. 4, pp. 7084.
6. Mikhailov, V.V., Agafii, V.I., and Yanakevich, A.I., Use of electrospark alloying to increase the wear resistance of friction pairs from Kh18N9T stainless steel, Tr. Gos. Nauchno-Issled. Tekhnol. inst. Remonta Eksp. Trakt. S-kh. Mash., 2013, vol. 111, no. 2, pp. 63–65.
7. Kuzharov, A.S., Burlakova, V.E., Zadoshenko, E.G., Kuzharov, A.A., Burlov, A.S., Uraev, A.I., Kravchik, K., and Garnovskii, A.D., Tribotechnical possibilities of coordinating compounds of copper during friction of bronze on steel, Trenie Iznos., 2005, vol. 26, no. 6, pp. 628–637.
8. Savenko, V.I. and Shchukin, E.D., The relationship between phenomenological and structural criteria for the operation of friction units, Trenie Iznos., 1987, vol. 8, no. 4, pp. 581–589.
9. Savenko, V.I. and Shchukin, E.D., Residual stresses appearing in elastic-plastic materials deformed in active media. Uniaxial stress state, Fiz.-Khim. Mekh. Mater., 1987, no. 2, pp. 110–112.10.1007/BF00718149 ↗
10. Kuksenova, L.I. and Mamykin, S.M., The structure and properties of the surface layer of steel formed by metal-cladding lubricant and its effect on coupling characteristics, Trudy V Mezhdistsiplinarnogo nauchnogo foruma s mezhdunarodnym uchastiem “Novye materialy i perspektivnye tekhnologii” (Proc. V Interdisciplinary Scientific Forum with Int. Participation “New Materials and Advanced Tehcnologies”), Moscow: Vuki Vedi, 2019, vol. 2, pp. 109–113.
11. Kuksenova, L.I., Rybakova, L.M., Vyacheslavova, L.A., Dyakin, S.I., Titov, V.V., and Filatova, T.P., Performance improvement of heavily loaded friction pairs of the shaft-sleeve type using Atlanta lubricant, Vestn. Mashinostr., 1988, no. 7, pp. 11–16.
12. Arkhipov, V.E., Londarskii, A.F., Pugachev, M.S., Polyakov, A.N., Shirokova, N.V., Khrennikova, I.A., and Kuksenova, L.I., The use of coatings obtained by gas-dynamic spraying for friction units, Materialy 4-oi Mezhdunarodnoi nauchno-tekhnicheskoi konferentsii, posvyashchennoi 80-letiyu IMASh RAN “Zhivuchest’ i konstruktsionnoe materialovedenie (Zhivkom-2018)” (Proc. Fourth Int. Sci.-Tech. Conf. Dedicated to the 80th Anniversary of the Mechanical Engineering Research Institute of the Russian Academy of Sciences “Durability and Construction Material Science (Zhivkom-2018)”), Moscow: Inst. Mashinoved., Ross. Akad. Nauk, 2018, pp. 38–40.
13. Yagodkin, Yu.D., Ion-beam processing of metals and alloys, Itogi Nauki Tekh., Ser.: Metalloved. Term. Obrab., 1990, vol. 24, pp. 167–221.