Wear Resistance of Steel Rope with Galvanized Wires in the Inner Layer of Strands
Source abstract
Abstract
The study provides the results of comparative tests of the durability of steel ropes made according to state standard GOST 3241-91, which in 2016 made changes allowing the replacement of wires without covering the inner layer of the strand with galvanized wires of the corresponding diameter. Tests were carried out on the run machine according to GOST 2387–80 “Steel Ropes. Endurance Method” in relatively dry air at temperatures of 20 ± 5°C, and –60 ± 5°C, as well as with the periodic impact of 5% of a water solution with NaCl, which simulated seawater. Samples of 5.6 G-I-N-R-1770 rope, which met GOST 2688–80 “Double-Curls of LK-R 6 × 19 (1 + 6 + 6/6) + 1” were tested, as lubricated and unlubricated with rope lubricant. As a result of the studies, it has been established that the replacement of wires without coating in the inner layer of the strand with galvanized wires, depending on the conditions of operation of the rope, can lead to a significant increase or decrease in the durability of the rope. In particular, the durability of the rope containing galvanized wires repeatedly increases the durability of the rope (more than three times) during tests in sea water, in relation to a rope made entirely of wire without coating. When tested at low temperatures, on the contrary, it similarly reduces the wear resistance of the same edge, which can be almost halved, depending on the applied lubricant.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Engineering and Environmental Studies · Engineering Diagnostics and Reliability · Industrial Engineering and Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (10)
Show source-provided references
1. Markhel’, I.I., Kranovye kanaty (Crane Ropes), Moscow: Mashinostroenie, 1983.
2. Feyrer, K., Wire Ropes: Tension, Endurance, Reliability, Berlin: Springer-Verlag, 2007.10.1007/978-3-540-33831-4 ↗
3. Mironenko, A. and Shpakov, I., Wire ropes condition monitoring: conception and implementation, Proc. 19th Int. Conf. VVaPol, Podbanske, 2016, p. 713.
4. Chaplin, C.R., Prediction of fatigue endurance of wire ropes subject to fluctuating tension, OIPEEC Bull., 1995, vol. 70, pp. 31–40.
5. Evans, J.J., Ridge, I.M.L., and Chaplin, C.R., Wire strain variations in normal and overloaded ropes in tension-tension fatigue and their effect on endurance, J. Strain Anal. Eng. Des., 2001, vol. 36, no. 2, pp. 219–230; Evans, J.J., Ridge, I.M.L., and Chaplin, C.R., Wire failures in ropes and their influence on local wire strain behavior in tension-tension fatigue, J. Strain Anal. Eng. Des., 2001, vol. 36, no. 2, pp. 231–244.10.1243/0309324011512667 ↗
6. GOST (State Standard) 3241–91: Steel Ropes. Specifications, Moscow: Izd. Standartov, 1993.
7. GOST (State Standard) 2387–80: Steel Ropes. Method of Endurance Testing, Moscow: Izd. Standartov, 1980.
8. Golovin, V.P., Sholom, V.Yu., Abramov, A.N., and Kramer, O.L., Low-temperature properties of rope lubricants, Materialy XII Vserosiiskogo s”ezda po fundamental’nym problemam teoreticheskoi i prikladnoi mekhanike, g. Ufa, Respublika Bashkortostan, Rossiya, 19–24 avgusta 2019 g. (Proc. XII All-Russ. Congr. on Fundamentals of Theoretical and Applied Mechanics, Ufa, Bashkortostan, Russia, August 19–24, 2019), Ufa: Bashkir. Gos. Univ., 2019, vol. 4, pp. 448–450. ISBN 978-5-7477-4954-2. https://doi.org/10.22226/2410-3535-2019-congress-v410.22226/2410-3535-2019-congress-v4 ↗
9. Pokhmurskii, V.I., Korrozionnaya ustalost’ metallov (Corrosion Fatigue of Metals), Moscow: Metallurgiya, 1985.
10. Abramov, A.N., Sholom, V.Yu., Kramer, O.L., and Golovin, V.P., Stand resource tests of steel ropes, Lett. Mater., 2020, vol. 10, no. 2, pp. 195–199. https://doi.org/10.22226/2410-3535-2020-2-195-19910.22226/2410-3535-2020-2-195-199 ↗