journal article·2021-10

Development of Fretting during the Operation of Gas Transportation Facilities

O. Yu. Elagina, A. G. Buklakov, O. B. Dubinova, F. Novotny-Farkas

Journal of Friction and Wear· Volume 42· Issue 5
Publisher page

Abstract

The issue of the development of the fretting process on the contacting surfaces of metallic and metal–polymeric pairs under conditions of increased vibration is considered. A study of the wear characteristics of various pairs of friction has been carried out. During laboratory tests of friction pairs with an amplitude of 50 μm, metal–polymer friction pairs showed no weight wear. An increase in the displacement amplitude to 160 μm caused a more significant wear of the samples, which was determined by the gravimetric method. Tests of metal pairs showed the presence of wear during fretting at both an amplitude of 50 µm and an amplitude of 160 µm. The contact of two metal surfaces contributes to a more active course of wear processes, as a result of which powdery products of destruction of wear products are formed. It was revealed that an increase in the vibration amplitude leads to an increase in the wear rate of both metal–metal and metal–polymer friction pairs. The vibration of the contacting surfaces of gas transportation systems is characterized by the presence of low-frequency vibrations from 7 to 211 Hz with a range of vibration displacements from 19 to 566 μm, which forms various vibration amplitudes of the contacting surfaces during fretting. Linear equations are obtained for calculating the wear intensity depending on the vibration amplitude. The development of the fretting process during vibration leads to a loss of tightness of flange butt joints due to wear of the contacting surfaces, a weakening of the tightening torque of bolted joints by an average of 40 N⋅m per 1 million cycles and, as a consequence, the formation of a gap between the inner surfaces of the flanges. It is shown that it is possible to predict the maximum duration of flange butt joint operation under vibration conditions until the loss of tightness is achieved.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Mechanical stress and fatigue analysis · Surface Treatment and Coatings

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Fokin, B.S. and Aksel’rod, A.F., Accidents at foreign nuclear power plants caused by vibration damage to equipment, Energomashinostroenie, 1985, no. 8, pp. 40–46.
2. Suleimanov, M.M. and Vechkhaizer, L.I., Shum i vibratsiya v neftyanoi promyshlennosti (Noise and vibration in the oil industry), Moscow: Nedra, 1990.
3. Kryuchkov, A.N., Reduction of noise fluctuations in hydromechanical and gas systems, Doctoral (Eng.) Dissertation, Samara, 2006.
4. Kuz’bozhev, P.A., Improvement of methods for reducing vibrations in pipelines of gas distribution stations, Cand. Sci. (Eng.) Dissertation, Ukhta, 2019.
5. Bohórquez, L., Vázquez, J., Navarro, C., and Domínguez, J., On the prediction of the crack initiation path in fretting fatigue, Theor. Appl. Fract. Mech., 2019, vol. 99, pp. 140–146.10.1016/j.tafmec.2018.11.014 ↗
6. Liu, X., Liu, J., Zuo, Z., and Zhang, H., The effect of wear on short crack propagation under fretting conditions, Int. J. Mech. Sci., 2019, vols. 157–158, pp. 552–560.10.1016/j.ijmecsci.2019.05.001 ↗
7. Fontes do Rêgo, E.M., Antunes, M.A., and de Oliveira Miranda, A.C., A methodology for fretting fatigue life estimation using strain-based fracture mechanics, Eng. Fract. Mech., 2018, vol. 194, pp. 24–41.10.1016/j.engfracmech.2018.02.033 ↗
8. Ognjanovic, M., Ognjanovic, M., and Kolarevic, N., Testing and prediction of structural failures caused by fretting, Mater. Today: Proc., 2016, vol. 3, no. 4, pp. 1103–1107.
9. Kubota, M., Kubota, M., Takazaki, D., and Kondo, Y., A quantitative approach to evaluate fretting fatigue limit using a pre-cracked specimen, Tribol. Int., 2017, vol. 108, pp. 48–56.10.1016/j.triboint.2016.10.017 ↗
10. Sokolinskii, L.I., Tolstikhin, Yu.Yu., and Blinov, F.V., Rationing of vibration of reducing lines of gas distribution stations, Gaz. Prom-st’, 2017, no. 12, pp. 78–82.
11. Luzhnov, Yu.M., Analiz vidov iznashivaniya rabochikh poverkhnostei detalei: uchebno-metodicheskoe posobie (Analysis of Types of Wear of Working Surfaces of Parts: Manual), Moscow: Mosk. Avtomob.-Dorozhn. Inst., 2018.