Tribotechnical Properties of Sintered Friction Material with Colloidal Graphite
Source abstract
Abstract
Abstract— The results of the study of the effect of adding colloidal graphite powder in a composition of a carbon-containing additive on the tribotechnical properties of a sintered friction material based on copper operating in the presence of a lubricant are presented. It has been established that the method of introducing colloidal graphite into the composition of friction material affects the tribotechnical properties. With joint mixing of the components of the charge of the friction material, the coefficient of friction was 0.052–0.068. In the case of preliminary mixing of the batch without adding GE-1 graphite, the value of the friction coefficient was 0.045–0.068. It was found that a content of colloidal graphite of more than 15 vol % leads to a significant decrease in the value of the coefficient of friction, and an increase in wear. Compressive strength of material from 30 vol % of the carbon-containing additive in the form of GE-1 graphite is 340 MPa. Introduction of 5 vol % addition of colloidal graphite to GE-1 graphite practically does not ultimately affect the value of the strength, while a 10 vol % addition leads to a decrease in the ultimate strength by 20–30 MPa, and a 15 vol % addition, to a decrease to 270 MPa. The research results can be used in the development of new compositions of friction and antifriction materials obtained by the method of powder metallurgy, used for friction units of automotive vehicles and special purpose vehicles.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Wear Analysis · Powder Metallurgy Techniques and Materials · Polymer Science and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. Dyachkova, L.N., Production of antifriction composite powder infiltrated materials based on iron for heavily loaded friction units, Doctoral (Eng.) Dissertation, Minsk: Inst. Powder Metall., 2013.
2. Dmitrovich, A.A., Liashok, A.V., Rogovoi, A.N., and Saroka, D.I., Composite friction materials: main types and requirements for them, in Poroshkovaya metallurgiya (Powder Metallurgy), Minsk: Belarusskaya Nauka, 2015, no. 38, pp. 190–196.
3. Fedorchenko, I.M., Sovremennye friktsionnye materialy (Modern Friction Materials), Kiev: Naukova Dumka, 1975.
4. Balakin, V.A. and Sergeenko, V.P., Teplovye raschety tormozov i uzlov treniya (Thermal Calculations of Breaks and Friction Units), Gomel: Inst. Mekh. Polim. Metallopolim. Sist., Akad. Nauk Resp. Bel., 1999.
5. Libenson G.A., Osnovy poroshkovoi metallurgii (Fundamentals of Powder Metallurgy), Moscow: Metallurgiya, 1975.
6. Fedorchenko, I.M. and Pugina, L.I., Kompozitsionnye spechennye antifriktsionnye materialy (Composite Sintered Antifriction Materials), Kiev: Naukova Dumka, 1980.
7. Ilyushchanka, A.Ph., Liashok, A.V., Rogovoi, A.N., and Sharipov, V.M., Use of the term “sintered powder friction material,” Trakt. Sel’khozmash., 2016, no. 9, pp. 28–30.10.17816/0321-4443-66207 ↗
8. Ilyushchanka, A.Ph., Liashok, A.V., Dyachkova, L.N., Rogovoi, A.N., and Fomikhina, I.V., Features of the influence of pencil graphite and elemental graphite on the tribological properties of a copper-based friction material in conditions of boundary friction conditions, in Poroshkovaya metallurgiya (Powder Metallurgy), Minsk: Belarusskaya Nauka, 2019, no. 42, pp. 65–69.
9. Belgorodskii, V.D., Antifriktsionnyi grafit i ego primenenie v promyshlennosti (Antifriction Graphite and Its Application in Industry), Moscow: Znanie, 1974.
10. Bolsunovskaya, T.A., Efimochkin, I.Yu., and Sevost’yanova, N.V., Influence of graphite grade as a solid lubricant on the tribological properties of a metal composite material, Tr. Vseross. Inst. Aviats. Mater., 2018, no. 7 (67), pp. 69–77.
11. Panin, S.V., Kornienko, L.A., Nguen Suan, T., and Poltaranin, M.A., Wear resistance of composites based on ultra-high molecular polyethylene reinforced with graphite of various nature, Khim. Khim. Tekhnol., 2015, no. 5 (58), pp. 81–86.
12. Tseluikin, V.N., Tribological properties of composite electrochemical nickel-based coatings, J. Frict. Wear, 2010, vol. 31, no. 5, pp. 356–358.10.3103/S1068366610050065 ↗
13. Shevchenko, T.Yu., Solov’eva, N.D., Nechaev, G.G., and Surmenko, E.L., Electrodeposition of zinc-based composite coatings modified with carbon material, Perspekt. Mater., 2014, no. 2, pp. 71–77.
14. Zhornik, V.I. and Goranskii, G.G., The structure and properties of a hard alloy modified with ultrafine carbon additives, Aktual. Vopr. Mashinoved., 2013, no. 2, pp. 424–428.
15. Grevnov, L.M., Oglezneva, S.A., and Kulikova, A.A., Alloying of powder steels with different forms of carbon, Fundam. Issled., 2017, no. 11, pp. 284–288.
16. Bratkov, I.V., Production, electrochemical properties, and application of oxidized natural and modified graphites, Cand. Sci. (Eng.) Dissertation, Ivanovo, 2015.
17. Leshok, A.V., Dyachkova, L.N., Ilyushchenko, A.F., Rogovoy, A.N., and Alekseenko, N.A., Influence of copper frictional material composition on structure and tribotechnical properties, J. Frict. Wear, 2019, vol. 40, no. 6, pp. 495–500.10.3103/S1068366619060151 ↗
18. Chulovskaya, S.A. and Parfenyuk, V.I., Effect of isopropyl alcohol on cathodic deposition of ultradispersed copper-containing powders from electrolyte solutions, Russ. J. Appl. Chem., 2007, vol. 80, no. 6, pp. 930–933.10.1134/S1070427207060158 ↗