journal article·2021-05

Research of Friction, Wear, and Seizure Resistance of Extra High Loaded Nitrided Couplings

L. I. Kuksenova, V. N. Simonov, M. S. Alekseeva, S. A. Pakhomova, D. A. Kozlov

Journal of Friction and Wear· Volume 42· Issue 3
Publisher page

Abstract

The paper presents the results of tribotechnical tests of nitrided and carburized steels according to schemes simulating heavily loaded couplings: a pair of reverse sliding friction at loads up to 40 MPa and a pair of rolling friction with slipping in accordance with GOST 25.501–78 performed in order to assess the limit of contact endurance. The wear intensity (Ih), friction coefficient (f), and maximum permissible load (Pd), which determines the bearing capacity of the contact, and the critical pressure (Pcr), at which seizure are formed, are evaluated. It is shown that at a sliding speed of 0.19 m/s we have Рadm = 40 MPa, Рcr ≥ 40 MPa, Ih = 0.8 × 10–9, and f = 0.10 for a pair with a nitrided layer and Рd = 20 MPa, Рcr = 25 MPa, Ih = 1.4 × 10–9, and f = 0.13 for a pair with a cemented layer. The extreme pressure resistance, estimated by the value of the critical pressure, is 25–30% higher for pairs with a nitrided sample. For rolling conditions with slipping, the limit of contact fatigue of 16Kh2R3MFBAU-Sh and 20Kh3R3MBF-Sh nitrided steels is at the level of contact endurance of 18Kh2R4V-Sh carburized steel. The wear rate of iron nitrides is 2–3 times lower than that of the diffusion zone, the critical pressure increases, and the durability of the friction pair increases several times. From the standpoint of the thermodynamics of dissociation of Fe2–3N, Fe4N, and Fe3C at elevated temperatures in the contact spots, a hypothesis of the nature of the higher critical pressure of nitrided steels is put forward.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Tribology and Wear Analysis · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (11)

Show source-provided references
1. Eikin, L.S., Calculation of the thickness of the elastic-dynamic lubricant film for power gears, Probl. Treniya Smazki, 1974, no. 3, pp. 137–142.
2. Blok, H., Seizure-delay method for determining the protection against scuffing adborded by extreme pressure lubricants, J. Soc. Auto Eng., 1939, vol. 44, no. 5, pp. 193–210.
3. Matveevskii, R.M., Buysnovskii, I.A., and Lazovs-kaya, O.V., Protivozadirnaya stoikost’ smazochnykh sred pri trenii v rezhime granichnoi smazki (Anti-Seize Resistance of Lubricants during Friction in the Boundary Lubrication Mode), Moscow: Nauka, 1978.
4. Drozdov, Yu.N. and Gavrikov, Yu.A., New criterion for calculation of gears for seizure, Vestn. Mashinostr., 1967, no. 7, pp. 24–27.
5. Semenov, A.P., Metal seizure and its prevention during friction, Trenie Iznos, 1980, vol. 1, no. 2, pp. 236–246.
6. Geguzin, Ya.E., Kragel’skii, I.V., and Paritskaya, L.N., The intermutual seizure of metals at high temperatures under pressure, in O prirode skhvatyvaniya tverdykh tel (The Nature of Seizure of Solids), Moscow: Nauka, 1968, pp. 17–21.
7. Lyubarskii, I.M. and Palatnik, L.S., Metallofizika treniya (Metal Physics of Friction), Moscow: Metallurgiya, 1976.
8. Gerasimov, S.A., Kuksenova, L.I., and Lapteva, V.G., Struktura i iznosostoikost’ azotirovannykh konstruktsionnykh stalei i splavov (Structure and Wear Resistance of Nitrided Constructional Steels and Alloys), Moscow: Mosk. Gos. Tekh. Univ. im. N.E. Baumana, 2014.
9. Gerasimov, S.A., Kuksenova, L.I., Kraposhin, V.S., Lisotskii, I.V., Berezina, E.V., and Lapteva, V.G., Influence of the nanocrystalline phase of iron nitrides on the wear resistance of 38Kh2MYuA nitrided steel, Materialy Vserossiiskoi nauchno-tekhnicheskoi konferentsii s mezhdunarodnym uchastiem “Mashinostroitel’nye tekhnologii” (Proc. All-Russ. Sci.-Tech. Conf. with Int. Participation “Machine Engineering Technologies”), Moscow: Inst. Mashinoved., Ross. Akad. Nauk, 2010, pp. 216–218.
10. Zhukhovitskii, A.A. and Shvartsman, L.A., Fizicheskaya khimiya (Physical Chemistry), Moscow: Metallurgiya, 1987.
11. Emsley, J., The Elements, Oxford: Oxford Univ. Press, 1979.