Calculation of Equilibrium Roughness for the External Surface of the Lining of a Vehicle Brake System
Source abstract
Abstract
One important direction of increasing the operational efficiency of a vehicle is the problem of reducing the wear of a drum–lining friction pair. Reducing the wear of the drum–lining friction pair can be achieved by a decrease in the initial wear of the pair. For this purpose, the microgeometry of the external surface of the lining and the inner surface of the drum was sought, at which the contact pressure of the friction pair would be the same as that formed under the operating conditions of the friction unit at end of the run-in period. The model of a rough friction surface was assumed. At the first stage, the wear-contact problem of pressing the lining into the surface of the brake drum was solved, then a solution of the optimization problem was found. The found microgeometry of the friction surface provides an increase of the wear resistance of the drum–lining friction pair.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Tribology and Lubrication Engineering · Tribology and Wear Analysis · Gear and Bearing Dynamics Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (11)
Show source-provided references
1. Mirsalimov, V.M. and Aknundova, P.E., Minimization of abrasive wear for the internal surface of the hub of a friction pair, J. Frict. Wear, 2016, vol. 37, no. 5, pp. 424–429.10.3103/S1068366616050135 ↗
2. Janssen, A., Pinedo, B., Igartua, A., Liiskmann, G., and Sexton, L., Study on friction and wear reducing surface micro-structures for a positive displacement pump handling highly abrasive shale oil, Tribol. Int., 2017, vol. 107, pp. 1–9.10.1016/j.triboint.2016.11.017 ↗
3. Mirsalimov, V.M. and Akhundova, P.E., Inverse wear contact problem of the friction unit, Proc. Inst. Mech. Eng., Part C, 2018, vol. 232, pp. 4216–4226.
4. Mirsalimov, V.M. and Akhundova, P.E., Optimum problem on wear decrease for a hub of friction pair, Mech. Adv. Mater. Struct., 2020, vol. 27, pp. 353–363.10.1080/15376494.2018.1472827 ↗
5. Brown, E.D., Evdokimov, Yu.A., and Chichinadze, A.V., Modelirovanie trniya i iznashivaniya v mashinakh (Modeling of Friction and Wear in Machines), Moscow: Mashinostroenie, 1982.
6. Garkunov, D.N., Tribotekhnika (Tribotechnics), Moscow: Mashinostroenie, 1999.
7. Kombalov, V.S., Vliyanie sherokhovatosti tverdykh tel na trenie i iznos (The Effect of Roughness of Solids on Friction and Wear), Moscow: Nauka, 1974.
8. Goryacheva, I.G. and Dobychin, M.N., Kontaktnye zadachi v tribologii (Contact Tasks in Tribology), Moscow: Mashinostroenie, 1988.
9. Mirsalimov, V.M., Gasanov, Sh.G., and Geidarov, Sh.G., The wear-contact problem of indention of a shoe with a friction lining into the drum surface, Trudy XII Mezhdunarodnoi konferentsii “Tribologiya mashinostroeniyu” (Proc. XII Int. Conf. “Tribology for Machine Engineering”), Moscow, 2018, pp. 341–344.
10. Goryacheva, I.G., Mekhanika friktsionnogo vzaimodeistviya (Mechanics of Frictional Interaction), Moscow: Nauka, 2001.
11. Muskhelishvili, N.I., Nekotorye osnovnye zadachi matematicheskoi teorii uprugosti (Some General Tasks of Mathematical Theory of Elasticity), Moscow: Nauka, 1966.