journal article·2019-11

Mechanical and Tribological Properties of Polyethylene Terephthalate Track-Etched Membranes after Steam and Radiation Sterilization

E. O. Filippova, V. F. Pichugin, A. V. Filippov, A. V. Gradoboev

Journal of Friction and Wear· Volume 40· Issue 6
Publisher page

Abstract

Abstract—The article presents the results of studying the mechanical characteristics and tribological properties of PET track-etched membranes (TM) obtained by irradiating PET films with argon ions and subsequent etching. The article also shows the changes in the TM mechanical and tribological properties after radiation and steam sterilization. It is established that the sterilization process reduces elongation at break, the Young’s modulus, relative yield strength, and tensile stress. Tribological tests of TM demonstrated a friction coefficient of 0.08–0.17. The tests also showed the nature of the counterbody impact on the material surface, manifested in the formation of “grooves” of various sizes, “jamming” of the surface, and change in pore shape. It was established that TM sterilization does not significantly affect the behavior of the friction coefficient or nature of counterbody impact on the membrane surface.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Polymer crystallization and properties · Polymer Science and PVC

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (9)

Show source-provided references
1. Filippova, E.O., Pichugin, V.F., and Sokhoreva, V.V., Potential use of nuclear track membranes in ophthalmology, Petrol. Chem., 2014, vol. 54, no. 8, pp. 669–672.10.1134/S0965544114080039 ↗
2. Filippova, E.O., Karpov, D.A., Gradoboev, A.V., Sohoreva, V.V., and Pichugin, V.F., Influence of low-temperature plasma and γ radiation on the surface properties of PET track membranes, Inorg. Mater.: Appl. Res., 2016, vol. 7, no. 5, pp. 484–492.
3. Bhushan, B. and Koinkar, V.N., Microtribology of PET polymeric films, Tribol. Trans., 1995, vol. 38, pp. 119–127.10.1080/10402009508983387 ↗
4. Tani, H., Takahashi, H., and Koganezawa, S., Thermal behavior of frictional properties on ultra-thin perfluoropolyether lubricant film, Tribol. Online, 2016, vol. 11, no. 1, pp. 1–12.10.2474/trol.11.1 ↗
5. Sierros, K.A. and Kukureka, S.N., Tribological investigation of thin polyester substrates for displays, Wear, 2007, vol. 263, pp. 992–999.10.1016/j.wear.2007.01.073 ↗
6. Apel, P.Yu., Schulz, A., Spohr, R., Traumann, C., and Vulsadakis, V., Tracks of very heavy ions in polymers, Nucl. Instrum. Methods Phys. Res.,Sect. B, 1997, vol. 130, pp. 55–63.
7. Mizani, M., Sheikh, N., Ebrahimic, S.N., Geramid, A., and Tavakoli, F.A., Effect of gamma irradiation on physico-mechanical properties of spice packaging films, Radiat. Phys. Chem., 2000, vol. 78, no. 9, pp. 806–809.10.1016/j.radphyschem.2009.04.021 ↗
8. Riganakos, K.A., Koller, W.D., Ehlermann, D.A.E., Bauer, B., and Kontominas, M.G., Effects of ionizing radiation on properties of monolayer and multilayer flexible food packaging materials, Radiat. Phys. Chem., 1999, vol. 54, pp. 527–540.10.1016/S0969-806X(98)00263-1 ↗
9. Welle, F., Mauer, A., and Franz, R., Migration and sensory changes of packaging materials caused by ionizing radiation, Radiat. Phys. Chem., 2002, vol. 63, pp. 841–844.10.1016/S0969-806X(01)00576-X ↗