journal article·2019-09

Abrasive Wear of an Anchoring Material Based on Modified Birchwood

V. I. Vrublevskaya, V. V. Makeev

Journal of Friction and Wear· Volume 40· Issue 5
Publisher page

Abstract

Properties of the abrasive wear of antifriction material based on modified birchwood on samples with a linearly varying density along fibers impregnated and not impregnated with a lubricant were studied. The study was conducted by scratching. Results show that pressing allows for reducing the depth of penetration of an abrasive particle and the force of scratching, which contributes to a decrease of coefficient of friction and wear rate in the case of ingress of abrasive into the friction unit. Impregnation with a lubricant used to ensure the self-lubricity of compressed wood slightly increases the penetration depth of the abrasive particle. Nature of the abrasive wear of pressed birchwood was investigated by the scratch microstructure. It is shown that pressed wood on the contact surface of friction is destroyed as a homogeneous material. The effect of the stratification of material and the propagation of cracks along the fibers in pressed wood in the case of abrasive wear is not observed in comparison with natural wood with the same loading conditions of scratching.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Advanced machining processes and optimization · Tribology and Wear Analysis · Tunneling and Rock Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (10)

Show source-provided references
1. Vrublevskaya, V.I., Nevzorova, A.B., and Vrublevskii, V.B., Iznosostoikie samosmazyvayushchiesya antifriktsionnye materialy i uzly treniya iz nikh (Wear-Resistant Self-Lubricating Antifriction Materials and Friction Units Made of Them), Gomel: Bel. Gos. Univ. Transp., 2000.
2. Hamdan, S., et al., Wear of wood polymer composite for Journal Bearing Materials, Wood Res. J., 2010, vol. 1, no. 1, pp. 22–26.
3. Friedrich, K., Akpan, E.I., and Wetzel, B., Structure and mechanical/abrasive wear behavior of a purely natural composite: black-fiber palm wood, J. Mater. Sci., 2017, vol. 52, pp. 10 217–10 229.10.1007/s10853-017-1184-5 ↗
4. Uoo, Dzh.Kh. and Aiss, N.S., Friction and wear of PEEK and PEI mixtures with carbon fiber filler, Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Novye materially i tekhnologii v tribologii” (Proc. Int. Sci.-Tech. Conf. “New Materials and Technologies in Tribology”), Minsk: Bel. Gos. Tekh. Univ., 1992, p. 72.
5. Barsukov, V.G. and Krupich, B., Tribomekhanika dispersnykh materialov: tekhnologicheskie prilozheniya. Monografiya (Tribomechanics of Dispersed Materials: Technological Applications. Monograph), Grodno: Grodn. Gos. Univ., 2004.
6. Ohtani, T., Inoue, A., and Tanaka, C., Abrasive wear properties of compressed Sugi wood, J. Wood Sci., 2002, vol. 48, pp. 473–478.10.1007/BF00766642 ↗
7. Krokha, V.A. and Gekker, F.R., Technology to increase the abrasive wear resistance of machine parts, Trenie Iznos, 1998, vol. 19, no. 2, pp. 247–253.
8. Lonez, E. and Zambelli, G., The role of solid reinforcing phases in the abrasive wear of cast irons, Materialy mezhdunarodnoi nauchno-tekhnicheskoi konferentsii “Novye materialy i tekhnologii v tribologii” (Proc. Int. Sci.-Tech. Conf. “New Materials and Technologies in Tribology”), Minsk: Bel. Gos. Tekhnol. Univ. im. S.M. Kirova, 1992, p. 58.
9. Tkachev, V.N., Rabotosposobnost’ detalei mashin v usloviyakh obrazivnogo iznashivaniya (Performance of Machine Parts in Conditions of Abrasive Wear), Moscow: Mashinostroenie, 1995.
10. Nevzorova, A.B., Makeyeu, V.V., Vrublevskii, V.B., and Kren’, A.P., The study of hardness of modified wood by dynamic indentation, Derevoobrab. Prom-st’, 2009, no. 3, pp. 27–29.