journal article·2019-09

Influence of Current Waveform on the Wear Resistance of Coatings Obtained on VT6 Titanium Alloy with the Electrolytic Plasma Treatment Method

M. V. Prozhega, A. G. Rakoch, A. A. Gladkova, V. V. Savva

Journal of Friction and Wear· Volume 40· Issue 5
Publisher page

Abstract

In the study on the “disk–disk” method the wear resistance of coatings deposited on a VT6 alloy by the plasma electrolytic treatment (PET) method in alkaline aqueous solutions containing different concentrations of sodium aluminate (NaAlO2) at various ratios (0–1.4) of cathodic (IC) and anodic (IA) alternating current components while the value of anodic current density was constant (iA = 5 A/dm2), was studied. It was determined that the maximum increase of wear resistance of a titanium alloy surface is provided for the coating fabricated by the following technological condition: an alkaline aqueous solution containing 40 g/L of sodium aluminate NaAlO2; IC/IA = 0.8; and iA = 5 A/dm2. The high wear resistance of coating fabricated by this condition, as it was determined using the quantitative X-ray phase analysis, is caused by a high content of corundum (α-Al2O3) in the coating, which is a part of double-oxide (TiAl2O5) and its low porosity.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Surface Treatment and Coatings · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. Ponomarev, M.I. and Los’, A.V., The effect of tungsten-based coatings on the operability of movable units from titanium alloys, Otkrytye Inf. Komp. Integr. Tekhnol., 2014, no. 63, pp. 91–96.
2. Il’in, A.A., Kolachev, B.A., and Polkin, I.S., Titanovye splavy. Sostav, struktura, svoistva. Spravochnik (Titanium Alloys: Composition, Structure, and Properties: Handbook), Moscow: Vseross. Inst. Legk. Splavov, MATI, 2009.
3. Entsiklopediya. Tsvetnye metally i splavy (Ferrous Metals and Alloys: Encyclopedia), Frolov, K.V., Ed., Moscow: Mashinostroenie, 2001, vol. II-3.
4. Ryabkov, V.I., et al., Specific use of titanium alloys, stainless steels, and metal-composite antifriction coatings in the chassis of modern aircrafts, Aviats.-Kosm. Tekhnol., 2003, no. 36-1, pp. 6–14.
5. Batkis, G.S., et al., New generation frontal seals for centrifugal and screw compressors, Vestn. Kazan. Tekhnol. Univ., 2010, no. 9, pp. 408–417.
6. Zhukov, S.V., et al., Physico-mechanical properties, structure and phase composition of MDO coatings on titanium, Nauchn. Tr. (Vestn. MATI), 2007, no. 13 (85), pp. 60–66.
7. Sun, X.T., Jiang, Z.H., Xin, S.G., and Yao, Z.P., Composition and mechanical properties of hard ceramic coating containing α-Al2O3 produced by microarc oxidation on Ti–6Al–4V alloy, Thin Solid Films, 2005, vol. 471, pp. 194–199.10.1016/j.tsf.2004.06.096 ↗
8. Rakoch, A.G., Strekalina, D.M., and Gladkova, A.A., Wear-resistant coatings on titanium alloy VT6 (BT6), obtained by plasma-electrolytic oxidation, Tsvetn. Met., 2016, no. 2, pp. 80–84.10.17580/tsm.2016.02.13 ↗
9. Rakoch, A.G., Gladkova, A.A., and Dub, A.V., Plazmenno-elektroliticheskaya obrabotka alyuminievykh i titanovykh splavov (Plasma-Electrolytic Treatment of Aluminum and Titanium Alloys), Moscow: Mosk. Inst. Stali Splavov, 2017.
10. Rakoch, A.G., Gladkova, A.A., Linn, Z., and Strekalina, D.M., The evidence of cathodic micro-discharges during plasma electrolytic oxidation of light metallic alloys and micro-discharge intensity depending on pH of the electrolyte, Surf. Coat. Technol., 2015, vol. 269, pp. 138–144.10.1016/j.surfcoat.2015.02.026 ↗
11. Tomashov, N.D. and Chernova, G.P., Teoriya korrozii i korrozionnostoikie konstruktsionnye splavy (Theory of Corrosion and Corrosion-Resistant Construction Steels), Moscow: Metallurgiya, 1993.
12. Spie, L.B., Teichert, G., Schwarzer, R., Behnken, H., and Genzel, C., Moderne Röntgenbeugung. Röntgen diffraktometrie für Material wissenschaftler, Phys. Chem., 2009, vol. 564, pp. 273–280.
13. Yerokhin, A. L., Shatrov, A., Samsonov, V., Shashkov, P., Pilkington, A., Leyland, A., and Matthews, A., Oxide ceramic coatings on aluminum alloys produced by a pulsed bipolar plasma electrolytic oxidation process, Surf. Coat. Technol., 2005, vol. 199, pp. 150–157.10.1016/j.surfcoat.2004.10.147 ↗
14. Mita, I. and Midori, Y., Synthesis of ruby films by anodic oxidation of aluminum, Chem. Lett., 1981, vol. 10, no. 1, pp. 123–126.10.1246/cl.1981.123 ↗